ipfs · lidel · Nov 14, 2024 · Nov 14, 2024
diff --git a/docs/install/command-line.md b/docs/install/command-line.md
@@ -1,7 +1,7 @@
 ---
 title: Kubo
 description: Using IPFS Kubo through the command-line allows you to do everything that IPFS Desktop can do, but at a more granular level, since you can specify which commands to run. Learn how to install it here.
-current-ipfs-version: v0.31.0
+current-ipfs-version: v0.32.0
 ---
 
 # Install IPFS Kubo
@@ -31,7 +31,7 @@ Kubo runs on most Windows, MacOS, Linux, FreeBSD and OpenBSD systems that meet t
 
 Note the following:
 - The amount of disk space your IPFS installation uses depends on how much data you're sharing. A base installation uses around 12MB of disk space.
-- You can enable automatic garbage collection via [--enable-gc](../reference/kubo/cli.md#ipfs-daemon) and adjust using [default maximum disk storage](https://github.com/ipfs/kubo/blob/v0.31.0/docs/config.md#datastorestoragemax) for data retrieved from other peers.
+- You can enable automatic garbage collection via [--enable-gc](../reference/kubo/cli.md#ipfs-daemon) and adjust using [default maximum disk storage](https://github.com/ipfs/kubo/blob/v0.32.0/docs/config.md#datastorestoragemax) for data retrieved from other peers.
 
 
 <!-- TODO: hide this footgun until https://github.com/ipfs/kubo/pull/10524 is merged and released in stable kubo 
@@ -76,27 +76,27 @@ For installation instructions for your operating system, select the appropriate
 1. Download the Windows binary from [`dist.ipfs.tech`](https://dist.ipfs.tech/#kubo).
 
    ```powershell
-   wget https://dist.ipfs.tech/kubo/v0.31.0/kubo_v0.31.0_windows-amd64.zip -Outfile kubo_v0.31.0.zip
+   wget https://dist.ipfs.tech/kubo/v0.32.0/kubo_v0.32.0_windows-amd64.zip -Outfile kubo_v0.32.0.zip
    ```
 
-1. Unzip the file to a sensible location, such as `~\Apps\kubo_v0.31.0`.
+1. Unzip the file to a sensible location, such as `~\Apps\kubo_v0.32.0`.
 
    ```powershell
-   Expand-Archive -Path kubo_v0.31.0.zip -DestinationPath ~\Apps\kubo_v0.31.0
+   Expand-Archive -Path kubo_v0.32.0.zip -DestinationPath ~\Apps\kubo_v0.32.0
    ```
 
-1. Move into the `kubo_v0.31.0` folder
+1. Move into the `kubo_v0.32.0` folder
 
    ```powershell
-   cd ~\Apps\kubo_v0.31.0\kubo
+   cd ~\Apps\kubo_v0.32.0\kubo
    ```
 
 1. Check that the `ipfs.exe` works:
 
    ```powershell
    .\ipfs.exe --version
 
-   > ipfs version 0.31.0
+   > ipfs version 0.32.0
    ```
 
    At this point, Kubo is usable. However, it's strongly recommended that you first add `ipfs.exe` to your `PATH` using the following steps:
@@ -142,7 +142,7 @@ For installation instructions for your operating system, select the appropriate
    ```powershell
    ipfs --version
 
-   > ipfs version 0.31.0
+   > ipfs version 0.32.0
    ```
 
 :::
@@ -170,7 +170,7 @@ For installation instructions for your operating system, select the appropriate
    If Kubo is installed, the version number displays. For example:
 
    ```bash
-   > ipfs version 0.31.0
+   > ipfs version 0.32.0
    ```
 :::
 
@@ -181,13 +181,13 @@ For installation instructions for your operating system, select the appropriate
 1. Download the Linux binary from [`dist.ipfs.tech`](https://dist.ipfs.tech/#kubo).
 
    ```bash
-   wget https://dist.ipfs.tech/kubo/v0.31.0/kubo_v0.31.0_linux-amd64.tar.gz
+   wget https://dist.ipfs.tech/kubo/v0.32.0/kubo_v0.32.0_linux-amd64.tar.gz
    ```
 
 1. Unzip the file:
 
    ```bash
-   tar -xvzf kubo_v0.31.0_linux-amd64.tar.gz
+   tar -xvzf kubo_v0.32.0_linux-amd64.tar.gz
 
    > x kubo/install.sh
    > x kubo/ipfs
@@ -216,7 +216,7 @@ For installation instructions for your operating system, select the appropriate
    ```bash
    ipfs --version
 
-   > ipfs version 0.31.0
+   > ipfs version 0.32.0
    ```
 
 :::
@@ -228,13 +228,13 @@ For installation instructions for your operating system, select the appropriate
 1. Download the FreeBSD binary from [`dist.ipfs.tech`](https://dist.ipfs.tech/#kubo).
 
    ```bash
-   wget https://dist.ipfs.tech/kubo/v0.31.0/kubo_v0.31.0_freebsd-amd64.tar.gz
+   wget https://dist.ipfs.tech/kubo/v0.32.0/kubo_v0.32.0_freebsd-amd64.tar.gz
    ```
 
 1. Unzip the file:
 
    ```bash
-   tar -xvzf kubo_v0.31.0_freebsd-amd64.tar.gz
+   tar -xvzf kubo_v0.32.0_freebsd-amd64.tar.gz
 
    > x kubo/install.sh
    > x kubo/ipfs
@@ -263,7 +263,7 @@ For installation instructions for your operating system, select the appropriate
    ```bash
    ipfs --version
 
-   > ipfs version 0.31.0
+   > ipfs version 0.32.0
    ```
 
 :::
@@ -275,13 +275,13 @@ For installation instructions for your operating system, select the appropriate
 1. Download the OpenBSD binary from [`dist.ipfs.tech`](https://dist.ipfs.tech/#kubo).
 
    ```bash
-   wget https://dist.ipfs.tech/kubo/v0.31.0/kubo_v0.31.0_openbsd-amd64.tar.gz
+   wget https://dist.ipfs.tech/kubo/v0.32.0/kubo_v0.32.0_openbsd-amd64.tar.gz
    ```
 
 1. Unzip the file:
 
    ```bash
-   tar -xvzf kubo_v0.31.0_openbsd-amd64.tar.gz
+   tar -xvzf kubo_v0.32.0_openbsd-amd64.tar.gz
 
    > x kubo/install.sh
    > x kubo/ipfs
@@ -310,7 +310,7 @@ For installation instructions for your operating system, select the appropriate
    ```bash
    ipfs --version
 
-   > ipfs version 0.31.0
+   > ipfs version 0.32.0
    ```
 
 :::
@@ -322,7 +322,7 @@ For installation instructions for your operating system, select the appropriate
 
 ## Build Kubo from source
 
-For the current instructions on how to manually download, compile and build Kubo from source, see the [Build from Source](https://github.com/ipfs/kubo/blob/v0.31.0/README.md#build-from-source) section in the Kubo repository.
+For the current instructions on how to manually download, compile and build Kubo from source, see the [Build from Source](https://github.com/ipfs/kubo/blob/v0.32.0/README.md#build-from-source) section in the Kubo repository.
 
 ## Determining which node to use with the command line
 

diff --git a/docs/reference/kubo/cli.md b/docs/reference/kubo/cli.md
@@ -5,8 +5,8 @@ description: API documentation for the Kubo command-line executable.
 
 # Kubo command-line
 
-::: tip Generated on 2024-10-17 13:53:14, from kubo 0.31.0
-This document was autogenerated from CLI help text in [kubo 0.31.0](https://github.com/ipfs/kubo/releases/tag/v0.31.0)
+::: tip Generated on 2024-11-14 02:07:48, from kubo 0.32.0
+This document was autogenerated from CLI help text in [kubo 0.32.0](https://github.com/ipfs/kubo/releases/tag/v0.32.0)
 For issues and support, check out the [generate-cli-docs.sh](https://github.com/ipfs/ipfs-docs/blob/main/docs/reference/kubo/generate-cli-docs.sh) script on GitHub.
 :::
 
@@ -1087,12 +1087,25 @@ SYNOPSIS
 DESCRIPTION
 
   Available profiles:
-    'announce-on':
-      Re-enables Reprovide system (reverts announce-off profile).
-    'randomports':
-      Use a random port number for swarm.
-    'legacy-cid-v0':
-      Makes UnixFS import produce legacy CIDv0 with no raw leaves, sha2-256 and 256 KiB chunks.
+    'test':
+      Reduces external interference of IPFS daemon, this
+      is useful when using the daemon in test environments.
+    'announce-off':
+      Disables Reprovide system (and announcing to Amino DHT).
+
+      		USE WITH CAUTION:
+      		The main use case for this is setups with manual Peering.Peers config.
+      		Data from this node will not be announced on the DHT. This will make
+      		DHT-based routing an data retrieval impossible if this node is the only
+      		one hosting it, and other peers are not already connected to it.
+
+    'default-datastore':
+      Configures the node to use the default datastore (flatfs).
+
+      Read the "flatfs" profile description for more information on this datastore.
+
+      This profile may only be applied when first initializing the node.
+
     'pebbleds':
       Configures the node to use the pebble high-performance datastore.
 
@@ -1112,49 +1125,28 @@ DESCRIPTION
       NOTE: This profile may only be applied when first initializing node at IPFS_PATH
             via 'ipfs init --profile pebbleds'
 
+    'lowpower':
+      Reduces daemon overhead on the system. May affect node
+      functionality - performance of content discovery and data
+      fetching may be degraded.
+
     'test-cid-v1':
       Makes UnixFS import produce modern CIDv1 with raw leaves, sha2-256 and 1 MiB chunks.
     'server':
       Disables local host discovery, recommended when
       running IPFS on machines with public IPv4 addresses.
-    'test':
-      Reduces external interference of IPFS daemon, this
-      is useful when using the daemon in test environments.
-    'default-datastore':
-      Configures the node to use the default datastore (flatfs).
-
-      Read the "flatfs" profile description for more information on this datastore.
-
-      This profile may only be applied when first initializing the node.
-
-    'badgerds':
-      Configures the node to use the legacy badgerv1 datastore.
-
-      NOTE: this is badger 1.x, which has known bugs and is no longer supported by the upstream team.
-      It is provided here only for pre-existing users, allowing them to migrate away to more modern datastore.
-
-      Other caveats:
-
-      * This datastore will not properly reclaim space when your datastore is
-        smaller than several gigabytes.  If you run IPFS with --enable-gc, you plan
-        on storing very little data in your IPFS node, and disk usage is more
-        critical than performance, consider using flatfs.
-      * This datastore uses up to several gigabytes of memory.
-      * Good for medium-size datastores, but may run into performance issues
-        if your dataset is bigger than a terabyte.
-
-      See configuration documentation at:
-      https://github.com/ipfs/kubo/blob/master/docs/datastores.md#badgerds
-
-      NOTE: This profile may only be applied when first initializing node at IPFS_PATH
-            via 'ipfs init --profile badgerds'
-
-    'local-discovery':
-      Sets default values to fields affected by the server
-      profile, enables discovery in local networks.
     'default-networking':
       Restores default network settings.
       Inverse profile of the test profile.
+    'announce-on':
+      Re-enables Reprovide system (reverts announce-off profile).
+    'randomports':
+      Use a random port number for swarm.
+    'legacy-cid-v0':
+      Makes UnixFS import produce legacy CIDv0 with no raw leaves, sha2-256 and 256 KiB chunks.
+    'local-discovery':
+      Sets default values to fields affected by the server
+      profile, enables discovery in local networks.
     'flatfs':
       Configures the node to use the flatfs datastore.
 
@@ -1175,19 +1167,27 @@ DESCRIPTION
       NOTE: This profile may only be applied when first initializing node at IPFS_PATH
             via 'ipfs init --profile flatfs'
 
-    'lowpower':
-      Reduces daemon overhead on the system. May affect node
-      functionality - performance of content discovery and data
-      fetching may be degraded.
+    'badgerds':
+      Configures the node to use the legacy badgerv1 datastore.
 
-    'announce-off':
-      Disables Reprovide system (and announcing to Amino DHT).
+      NOTE: this is badger 1.x, which has known bugs and is no longer supported by the upstream team.
+      It is provided here only for pre-existing users, allowing them to migrate away to more modern datastore.
 
-      		USE WITH CAUTION:
-      		The main use case for this is setups with manual Peering.Peers config.
-      		Data from this node will not be announced on the DHT. This will make
-      		DHT-based routing an data retrieval impossible if this node is the only
-      		one hosting it, and other peers are not already connected to it.
+      Other caveats:
+
+      * This datastore will not properly reclaim space when your datastore is
+        smaller than several gigabytes.  If you run IPFS with --enable-gc, you plan
+        on storing very little data in your IPFS node, and disk usage is more
+        critical than performance, consider using flatfs.
+      * This datastore uses up to several gigabytes of memory.
+      * Good for medium-size datastores, but may run into performance issues
+        if your dataset is bigger than a terabyte.
+
+      See configuration documentation at:
+      https://github.com/ipfs/kubo/blob/master/docs/datastores.md#badgerds
+
+      NOTE: This profile may only be applied when first initializing node at IPFS_PATH
+            via 'ipfs init --profile badgerds'
 
 
 SUBCOMMANDS

diff --git a/docs/reference/kubo/rpc.md b/docs/reference/kubo/rpc.md
@@ -47,8 +47,8 @@ I AM SERIOUS, DO NOT EDIT ANYTHING BELOW ;-D
 
 -->
 
-::: tip Generated on 2024-10-17, from kubo v0.31.0
-This document was autogenerated from [v0.31.0](https://github.com/ipfs/kubo/releases/tag/v0.31.0).
+::: tip Generated on 2024-11-14, from kubo v0.32.0
+This document was autogenerated from [v0.32.0](https://github.com/ipfs/kubo/releases/tag/v0.32.0).
 For issues and support, check out the [http-api-docs](https://github.com/ipfs/ipfs-docs/tree/main/tools/http-api-docs) generator on GitHub.
 :::