digitables 1.2
M8-style pitch tables for the Digitone mk1 (OS 1.43): 16 tables of up to 16 semitone steps, each with a length and a loop point, saved with the project. Each note restarts its sound's table and the clock steps it.
- The TBL page: hold a track key (T1-T4) on its own to open core-dn1's Mod Menu, and pick TABLES; or press AMP until its third page. TBL sets the table (OFF, 1-16) and SPD the speed, from 24 ticks of the clock a step down to 1, then 1/2 ... 1/32 of a tick, then MAX, a step every audio block (1500 a second). Both are sound parameters with p-locks.
- The table editor: hold a track key on the TBL page. Trig keys pick a step; A sets its offset (-48..+48), C the length, D the loop point (or OFF: hold the last step), H the table.
- Saved with the project: SAVE PROJECT and LOAD PROJECT carry the tables, in a part of the project file the stock OS leaves alone, so the project still loads on stock firmware.
Status: the TBL page, the editor, playback and the fast speeds have run on a Digitone (1.1). The Mod Menu (1.2) has been checked in the emulator, along with the release build itself (menu, page, editor, playback). Not yet checked: restoring the tables at power-up, and the arpeggiator or portamento with tables.
Install
digitables 1.2 needs core-dn1 2.2, attached here (core-dn1-2.2.elemod, built from elekloader's mods/core-dn1 in #34 and #35). elekloader's apps bundle core-dn1 2.0a, so install the 2.2 core with the mod until a release has it.
In elekloader, choose Digitone_and_Digitone_Keys_OS1.43.syx as the stock firmware, + Install from file... both files, tick digitables, and make sure the core ticked with it is 2.2. The README has the steps, the command line, and how to get back to stock.
| file | sha256 |
|---|---|
digitables-1.2.elemod |
545c485ec616fbd8363d76d49802a2ea012a9c954e744636a18f1477c08dee43 |
core-dn1-2.2.elemod |
29e41968bc4789c0082b4387c1ccdde9bc36f1db5d87f5777a56f383328e5f21 |