Repository navigation
Using Libre 2 and Libre 3plus concurrently #460
|
During sensor change some people use 2 sensors concurrently (overlaping extended old filter and new one). I found myself in a predicament that i have 2 sensors applied: Libre 2 and Libre 3+, both Canadian. Both sensors were started by corresponding Abbott applications on the same phone (Samsung A56). L2 is monitored by Juggluco, which I use for several years, connecting 2 Libre 2 filters to Juggluco. I was tempted to connect L3+ to Juggluco as well, but given that L3+ is encoded in North America, I suspect connecting L3+ to my Juggluco would make L2 unaccessible. Does anyone know for sure? I know this is not a normal situation and might not be worth much time to spend on, so the question is more of a curiosity. |
Replies: 1 comment
|
Juggluco connects to the two sensors independently. Adding a second sensor will normally not influence the sensor already connected to Juggluco. Juggluco also doesn't switch to a North American mode when connecting to North Amarican sensors. |
Juggluco connects to the two sensors independently. Adding a second sensor will normally not influence the sensor already connected to Juggluco. Juggluco also doesn't switch to a North American mode when connecting to North Amarican sensors.
In some cases Juggluco can lose contact with a sensor and sometimes resetting Bluetooth by turning Bluetooth off and on in Android is needed.