FOrcaSlicer 2.3.2-fos.8.5.5
This release makes an object's filament its outer wall end to end, cleans up the
filament dropdowns so objects always carry a concrete filament, and fixes the per-nozzle
process (PRP) panel scaling and layout on mixed-DPI setups. Version bumped and tagged
v2.3.2-fos.8.5.5.
Outer wall is the object's filament
An object's filament is now defined by its outer wall. The per-object Filament column and
the 3D object color both show the outer-wall filament - what you actually see on the print -
instead of a separate object "default" (the old "Global" label is gone). Objects always carry a
concrete filament now, so features never silently fall back to an invisible default.
Every place you can set an object's filament stays in sync and drives the same value: the
right-click menu, the inline Filament dropdown, the Object Table dropdown, the outer-wall
filament selector, and the 3D preview all agree.
"Unify Object Filaments" menu
The right-click "Change Default Filament" item is now "Unify Object Filaments". It sets the
outer wall, inner wall, sparse infill, and solid infill of the selected object(s) to one filament
in a single action - the quick "print this whole object on filament N" shortcut. The Object Table
filament dropdown does the same thing when you pick a filament there. Both menu strings are now
translated to Simplified Chinese.
Support base/interface and the wipe tower keep their own filament controls and are unaffected; on
mixed-nozzle printers they still must be a concrete filament (this gate is unchanged).
Cleaner filament dropdowns (no more "Default")
Now that objects and their features always carry a concrete filament, the "Default"/"Global"
row is gone from the dropdowns where it no longer makes sense:
- The object-list Fila. column dropdown no longer offers a "Global" row for objects and model
parts - they list filaments 1..N and default to filament 1. Parameter modifiers and layer
ranges keep the inherit row, because "don't override, inherit the object's filament" is still a
real choice there. - The Filament for Features dropdowns (walls, inner walls, sparse infill, solid infill) list
filaments only. A feature that somehow still holds 0 is printed on filament 1.
"Other line widths" tooltips
The outer wall, inner wall, top surface, sparse infill, solid infill, and support line-width
tooltips now state that setting the value to 0 uses the Default line width - the same
behavior as before, just documented so 0 reads as "inherit" rather than "no width." Chinese
tooltips updated to match.
Per-nozzle process (PRP) panel scaling fix
On a machine with two monitors at different scaling (e.g. 100% and 150%), the per-nozzle PRP
rows for Nozzle 2-4 stayed frozen at their build-time scale while Nozzle 1 tracked the current
monitor - so their dropdowns, save/search buttons, and row spacing looked oversized on the 100%
monitor. The nozzle rows now rescale to the current monitor along with Nozzle 1, and the
per-nozzle Layer height / Line width notebook tabs rescale too. No more toggling tabs to fix the
spacing.
Also included since 8.5.4
- Fixed a false "Too small line width" error that could block slicing a mixed-nozzle object at a
tall layer height.
No other changes
Single-nozzle-size printers are unaffected. Everything from 8.5.4 and earlier - per-nozzle line
widths on PTP create, painted color-patch widths, the Nozzle 1 process preset, the Simplified
Chinese pass, and the i18n build-pipeline repair - is unchanged.
FOrcaSlicer 2.3.2-fos.8.5.5（中文说明）
本版本将对象耗材以其外墙为准贯穿始终，整理了耗材下拉框使对象始终携带具体耗材，并修复了逐出口
工艺（PRP）面板在混合缩放显示器下的缩放与布局问题。版本号已提升并打标签 v2.3.2-fos.8.5.5。
对象耗材以"外墙"为准
对象的耗材现在由其外墙决定。单对象耗材列和三维对象颜色都显示外墙耗材——即你在打印件上实际看到
的颜色——而不再显示单独的对象"默认"耗材（旧的"全局"标签已移除）。对象现在始终携带一个具体耗材，因此
各特征不会再悄悄回退到一个不可见的默认值。
所有可以设置对象耗材的入口都保持同步并写入同一个值：右键菜单、内联耗材下拉框、对象表格下拉框、外墙
耗材选择器以及三维预览都保持一致。
"统一对象耗材"菜单
右键菜单中的"更改默认耗材"现改为**"统一对象耗材"**。它会一次性把所选对象的外墙、内墙、填充和实心
填充设为同一种耗材——即"整个对象用耗材 N 打印"的快捷操作。在对象表格的耗材下拉框中选择耗材时执行相同
的操作。两个菜单字符串现已翻译为简体中文。
支撑底层/接触面以及擦拭塔保留各自的耗材控件，不受影响；在混合出口尺寸的打印机上它们仍必须为具体耗材
（此限制不变）。
更简洁的耗材下拉框（不再有"默认"）
既然对象及其特征始终携带具体耗材，"默认"/"全局"行已从不再需要它的下拉框中移除：
- 对象列表的 耗材 列下拉框对对象和模型零件不再提供"全局"行——它们列出耗材 1..N 并默认为耗材 1。
参数修改器和层高范围保留继承行，因为对它们而言"不覆盖、继承对象耗材"仍是一个有效选项。 - 特征耗材（外墙、内墙、填充、实心填充）下拉框仅列出耗材。若某特征仍为 0，则用耗材 1 打印。
"其他线宽"提示
外墙、内墙、顶面、稀疏填充、实心填充和支撑线宽的提示现在说明将其设置为 0 时使用默认线宽——与之前
行为一致，只是加以说明，使 0 读作"继承"而非"无线宽"。中文提示已同步更新。
逐出口工艺（PRP）面板缩放修复
在两台不同缩放（如 100% 和 150%）显示器的机器上，出口 2-4 的逐出口 PRP 行会停留在构建时的缩放，而
出口 1 会跟随当前显示器——因此它们的下拉框、保存/搜索按钮和行间距在 100% 显示器上显得过大。现在这些
出口行会与出口 1 一同缩放到当前显示器，逐出口的层高/线宽标签页也会缩放。不再需要切换标签页来修正间距。
8.5.4 以来同时包含
- 修复了在较高层高下对混合出口对象切片时可能误报"线宽过小"并阻止切片的问题。
其他无变化
单出口尺寸的打印机不受影响。8.5.4 及更早版本的所有内容——创建 PTP 时的每出口线宽、上色色块线宽、出口
1 的工艺预设、简体中文整理，以及本地化构建流程修复——均保持不变。