These 3D models were designed using TinkerCad and printed on a Prusa MK3 with PETG filament, except for the Miqro model which was optimized for printing with TPU.
- Import the
.stlfile of your choice into your favourite slicing software (e.g., PrusaSlicer, Cura, Slic3r). - Adjust print settings as needed for your specific printer and materials.
- Enjoy printing!
These 3D models are released under a Creative Commons Attribution-ShareAlike license (CC BY-SA 4.0). This means you are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material
Under the following terms:
- Attribution — You must give appropriate credit, provide a link to the CC BY-SA 4.0 license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
The user assumes all risks when using these 3D models. While every effort has been made to ensure they are suitable for their intended use, actual results may vary depending on many factors including but not limited to printer calibration, filament quality, and print settings.
For questions or suggestions, please open an issue at https://github.com/joryanick/3D-Designs/issues. I'm always interested in hearing from users and am happy to assist where I can.