v3.10.12

v3.10.12

• Updated plugin battery mode names
• Added device name to debug messages
• SDM630 added per phase kwh meter tracking + daily kwh meter (estimate)
• More gas fix reset at night time (apiv1 and apiv2)
• Bugfix: incorrect daily reset during day of gas usage
• Bugfix: Energylink (watermeter) and Thermometer (battery)
  NOTE: This is an estimate based on polling interval. If bad wifi or Homey can't reach the SDM630 the measured value will be lower than the actual data.

v3.10.7

• Bugfix: Homewizard Legacy fetch (tab was empty, no entries while there were errors in the log)
• Remove fetchQueue feature in favor of capture debug information in the app settings page
• Watermeter daily usage added
• Bugfix: Device Fetch Debug wasn't updating only showed "Loading..."
• Bugfix: Circular Reference "device"
• Bugfix: SDM230(p1mode) - updateCapability missed
• Finetune debug log (ignore message circuit_open)
• Energy_socket finetune, added a device queue as a replacement for the earlier centralized fetchQueue
• Homewizard adaptive polling + tuning timeouts
• Cleanup device drivers with overcomplicated checks that ended up with polling deadlocks
• SDM230(p1mode) - Extra code handling for TIMEOUT issues
• Daily gas usage reset improvement (nighttime sometimes misses when there is no gas value received)

v3.9.29

• Wsmanager optimize
• Homewizard legacy custom polling
• Driver.js (apiv2) log fix (this.log undefined)
• Thermometer rollback (name index matching doesnt work as expected)
• Homewizard legacy -> node-fetch and not the fetchQueue utility (bad user experience feedback)
• Baseload (sluipverbruik) improvement (fridge/freezer should not be flagged as invalid )
• Homewizard app setting page with log or debug information for discovery, fetch failures, websocket problems and baseload samples
• Bugfix: Homewizard.poll (legacy unit)
• Homewizard Legacy fetch debug added to same section under Application settings
• Heatlink Legacy improvement
• Homewizard Legacy Preset improvement (UI picker in Homey app)
• Using external gas meter (timestamp X) instead of administrative meter
• Thermometer trigger and condition cards for no response for X hours.
• Improvement fetchQueue (protect against high cpu warning for devices on 1s polling)

v3.9.20

• New Plugin Battery mode support (zero_charge_only & zero_discharge_only)
• Optional gas checkbox (default enabled) for P1 (apiv1 and apiv2). (User request)
• Added 15min power datapoint for Belgium (average_power_15m_w) P1(apiv2) (user request)
• Plugin Battery - Bugfix setMode for to_full (PUT)
• Updated SDM230_v2 and SDM630_v2 drivers
• Bugfix - Updated P1apiv2 check-battery-mode condition card
• Backward compatibilty fix for the new battery mode applied to older P1 firmware.
• Bugfix - Websocket payload battery mode adjustment
• Fixed: rare crash when _handleBatteries() ran after a device was deleted, causing Not Found: Device with ID … errors during setStoreValue.
• Phase overload notification setting added and a limiter to avoid notification flooding
• New Feature: Baseload (sluipverbruik) detection (experimental)
• Bugfix: energy_socket connection_error capability fix
• Bugfix: energy_v2 (handleBatteries) - device_not_found crash
• Bugfix: trigger cards for SDM230_v2
• APIv2 change pairing: Modified the username that is used during pair made it unique per homey
• Bugfix: APIv2 pairing -> local/homey_xxxxxx
• Bugfix: SDM630v2 trigger cards removed (obsolete as these are default Homey)
• Finetune: P1(apiv2) websocket + polling, capability updates
• Finetune: energy_sockets (fetch / timeout) centralized
• Refractor code update for P1apiv1, SDM230, SDM630, watermeter
• Customizable phase overload warning + reset
• Phase 1 /3 fix for P1(apiv1) after refractor code update
• Bugfix: Fallback url for SDM230v2 and P1apiv2 (mDNS fail workaround)
• Bugfix: pairing problem "Cannot read properties of undefined (reading 'log')
• Homewizard legacy, clear some old callback methods
• Finetune async/await updates