Are phases also available?
"Power.Active.Import" is now (L3 ?!)
Back office (OCPP) configuration key list for Alfen chargers
MeterValuesSampledData Sampled measurand(s) to be included in every meter value. The interval can be changed by
changing the key "MeterValueSampleInterval". A combination, up to 9, of measurands is
supported. The measurands can be combined by separating the value by a comma ","
Value example: 'Energy.Active.Import.Register,Voltage.L1-N,Current.Import.L1'
Supported values:
Energy.Active.Import.Register, Power.Active.Import, Current.Import, Voltage,
Temperature, Current.Offered, Frequency, Power.Factor
Measurand(s) must be combined with the phase (separated by a dot ‘.’)
Supported phases:
Voltage meter values support phase configuration:
L1-N, L2-N, L3-N, L1-L2, L2-L3, L3-L1
Value example: 'Voltage.L1-N'
Current, power and power factor meter values support phase configuration:
L1, L2, L3
Value example: 'Current.Import.L1'
When the 'SmartChargingMode' (OCPP 1.5+) is beeing used, the following measurands are
available:
Supported values:
Current.L1 ; Current.L2 ; Current.L3
Are phases also available?
"Power.Active.Import" is now (L3 ?!)
Back office (OCPP) configuration key list for Alfen chargers
MeterValuesSampledData Sampled measurand(s) to be included in every meter value. The interval can be changed by
changing the key "MeterValueSampleInterval". A combination, up to 9, of measurands is
supported. The measurands can be combined by separating the value by a comma ","
Value example: 'Energy.Active.Import.Register,Voltage.L1-N,Current.Import.L1'
Supported values:
Energy.Active.Import.Register, Power.Active.Import, Current.Import, Voltage,
Temperature, Current.Offered, Frequency, Power.Factor
Measurand(s) must be combined with the phase (separated by a dot ‘.’)
Supported phases:
Voltage meter values support phase configuration:
L1-N, L2-N, L3-N, L1-L2, L2-L3, L3-L1
Value example: 'Voltage.L1-N'
Current, power and power factor meter values support phase configuration:
L1, L2, L3
Value example: 'Current.Import.L1'
When the 'SmartChargingMode' (OCPP 1.5+) is beeing used, the following measurands are
available:
Supported values:
Current.L1 ; Current.L2 ; Current.L3