lede-project · bobafetthotmail · Jan 23, 2017
diff --git a/target/linux/kirkwood/base-files/etc/board.d/01_leds b/target/linux/kirkwood/base-files/etc/board.d/01_leds
@@ -38,6 +38,9 @@ case "$board" in
 "guruplug-server-plus")
 	ucidef_set_led_timer "health" "health" "guruplug:red:health" "200" "800"
 	;;
+"nsa310b")
+	ucidef_set_led_default "health" "health" "nsa310:green:sys" "1"
+	;;
 "sheevaplug" | \
 "sheevaplug-esata")
 	ucidef_set_led_timer "health" "health" "sheevaplug:blue:health" "200" "800"

diff --git a/target/linux/kirkwood/base-files/etc/board.d/02_network b/target/linux/kirkwood/base-files/etc/board.d/02_network
@@ -22,13 +22,17 @@ case "$board" in
 "sheevaplug-esata")
 	ucidef_set_interface_lan "eth0" "dhcp"
 	;;
+"guruplug-server-plus")
+	ucidef_set_interface_lan "eth0 eth1" "dhcp"
+	;;
 "linksys-audi"|\
 "linksys-viper")
 	ucidef_add_switch "switch0" \
 		"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" "6@eth1"
 	;;
-"guruplug-server-plus")
-	ucidef_set_interface_lan "eth0 eth1" "dhcp"
+"nsa310b")
+	ucidef_set_interface_lan "eth0" "dhcp"
+	ucidef_set_interface_macaddr "lan" $( fw_printenv ethaddr | awk -F"=" '{print $2}' )
 	;;
 *)
 	ucidef_set_interface_lan "eth0"

diff --git a/target/linux/kirkwood/base-files/etc/diag.sh b/target/linux/kirkwood/base-files/etc/diag.sh
@@ -20,6 +20,9 @@ get_status_led() {
 	linksys-viper)
 		status_led="viper:white:health"
 		;;
+	nsa310b)
+		status_led="nsa310:green:sys"
+		;;
 	esac
 }
 

diff --git a/target/linux/kirkwood/base-files/etc/init.d/nsa310_fancontrol b/target/linux/kirkwood/base-files/etc/init.d/nsa310_fancontrol
@@ -0,0 +1,21 @@
+#!/bin/sh /etc/rc.common
+
+START=98
+boot() {
+. /lib/functions.sh
+. /lib/kirkwood.sh
+
+#configuring lm85 onboard temp/fan controller to run the fan on its own
+#for more information, please read https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface
+
+path_to_hwmon='/sys/devices/platform/ocp@f1000000/f1011000.i2c/i2c-0/0-002e/hwmon/hwmon0'
+
+case $(kirkwood_board_name) in
+	nsa310b)
+	echo 2 > "$path_to_hwmon/pwm1_enable" # fan is on pwm1
+	echo 1 > "$path_to_hwmon/pwm1_auto_channels" # temp1 is the only one that changes
+	echo 23000 > "$path_to_hwmon/temp1_auto_temp_min"
+	echo 43000 > "$path_to_hwmon/temp1_auto_temp_max" # next step is 49600 millicelsius, or 50 celsius, 43 celsius is better
+		;;
+esac
+}
diff --git a/target/linux/kirkwood/base-files/lib/kirkwood.sh b/target/linux/kirkwood/base-files/lib/kirkwood.sh
@@ -57,6 +57,10 @@ kirkwood_board_detect() {
 		name="sheevaplug-esata"
 		;;
 
+	"ZyXEL NSA310b")
+		name="nsa310b"
+		;;
+
 	"ZyXEL NSA310S")
 		name="nsa310s"
 		;;

diff --git a/target/linux/kirkwood/image/Makefile b/target/linux/kirkwood/image/Makefile
@@ -11,7 +11,7 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/image.mk
 
 KERNEL_LOADADDR:=0x8000
-TARGET_DEVICES = linksys-audi linksys-viper dockstar goflexnet goflexhome iconnect pogo_e02 ib62x0
+TARGET_DEVICES = linksys-audi linksys-viper dockstar goflexnet goflexhome iconnect pogo_e02 ib62x0 nsa310b
 
 UBI_OPTS := -m 2048 -p 128KiB -s 512
 UBIFS_OPTS := -m 2048 -e 126KiB -c 4096
@@ -80,6 +80,13 @@ $(Device/dockstar)
   DEVICE_DTS := kirkwood-iconnect
 endef
 
+define Device/nsa310b
+$(Device/dockstar)
+  DEVICE_TITLE := ZyXEL NSA310b
+  DEVICE_DTS := kirkwood-nsa310b
+  DEVICE_PACKAGES := kmod-r8169 kmod-gpio-button-hotplug kmod-hwmon-lm85
+endef
+
 define Device/pogo_e02
 $(Device/dockstar)
   DEVICE_TITLE := Cloud Engines Pogoplug E02

diff --git a/target/linux/kirkwood/patches-4.4/190-zyxel-nsa3xx-common-nand-partitions.patch b/target/linux/kirkwood/patches-4.4/190-zyxel-nsa3xx-common-nand-partitions.patch
@@ -0,0 +1,47 @@
+--- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
++++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
+@@ -121,39 +121,15 @@
+
+ 	partition@0 {
+ 		label = "uboot";
+-		reg = <0x0000000 0x0100000>;
++		reg = <0x0000000 0x00c0000>;
+ 		read-only;
+ 	};
+ 	partition@100000 {
+ 		label = "uboot_env";
+-		reg = <0x0100000 0x0080000>;
++		reg = <0x00c0000 0x0080000>;
+ 	};
+-	partition@180000 {
+-		label = "key_store";
+-		reg = <0x0180000 0x0080000>;
+-	};
+-	partition@200000 {
+-		label = "info";
+-		reg = <0x0200000 0x0080000>;
+-	};
+-	partition@280000 {
+-		label = "etc";
+-		reg = <0x0280000 0x0a00000>;
+-	};
+-	partition@c80000 {
+-		label = "kernel_1";
+-		reg = <0x0c80000 0x0a00000>;
+-	};
+-	partition@1680000 {
+-		label = "rootfs1";
+-		reg = <0x1680000 0x2fc0000>;
+-	};
+-	partition@4640000 {
+-		label = "kernel_2";
+-		reg = <0x4640000 0x0a00000>;
+-	};
+-	partition@5040000 {
+-		label = "rootfs2";
+-		reg = <0x5040000 0x2fc0000>;
++	partition@140000 {
++		label = "ubi";
++		reg = <0x0140000 0x7ec0000>;
+ 	};
+ };
diff --git a/target/linux/kirkwood/patches-4.4/191-nsa310b.patch b/target/linux/kirkwood/patches-4.4/191-nsa310b.patch
@@ -0,0 +1,169 @@
+kirkwood: add nsa310b dtb, a zyxel nsa310 variant
+
+add support to a nsa310 variant with red/green usb led
+and lm85 temp/fan controller
+
+Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
+
+NOTE: this patch can be upstreamed as-is, LEDE-specific
+		nand partitions are set in another patch
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -203,6 +203,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ 	kirkwood-ns2mini.dtb \
+ 	kirkwood-nsa310.dtb \
+ 	kirkwood-nsa310a.dtb \
++	kirkwood-nsa310b.dtb \
+ 	kirkwood-openblocks_a6.dtb \
+ 	kirkwood-openblocks_a7.dtb \
+ 	kirkwood-openrd-base.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-nsa310b.dts
+@@ -0,0 +1,146 @@
++/dts-v1/;
++
++#include "kirkwood-nsa3x0-common.dtsi"
++
++/*
++ * There are at least two different NSA310 designs. This variant has
++ * a red/green USB Led (same as nsa310) and a lm85 temp/fan controller.
++ */
++
++/ {
++	model = "ZyXEL NSA310b";
++	compatible = "zyxel,nsa310a", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
++
++	memory {
++		device_type = "memory";
++		reg = <0x00000000 0x10000000>;
++	};
++
++	chosen {
++		bootargs = "console=ttyS0,115200";
++		stdout-path = "&uart0";
++	};
++
++	mbus {
++		pcie-controller {
++			status = "okay";
++
++			pcie@1,0 {
++				status = "okay";
++			};
++		};
++	};
++
++	ocp@f1000000 {
++		pinctrl: pin-controller@10000 {
++			pinctrl-0 = <&pmx_unknown>;
++			pinctrl-names = "default";
++
++			pmx_led_esata_green: pmx-led-esata-green {
++				marvell,pins = "mpp12";
++				marvell,function = "gpio";
++			};
++
++			pmx_led_esata_red: pmx-led-esata-red {
++				marvell,pins = "mpp13";
++				marvell,function = "gpio";
++			};
++
++			pmx_led_usb_green: pmx-led-usb-green {
++				marvell,pins = "mpp15";
++				marvell,function = "gpio";
++			};
++
++			pmx_led_usb_red: pmx-led-usb-red {
++				marvell,pins = "mpp16";
++				marvell,function = "gpio";
++			};
++
++			pmx_led_sys_green: pmx-led-sys-green {
++				marvell,pins = "mpp28";
++				marvell,function = "gpio";
++			};
++
++			pmx_led_sys_red: pmx-led-sys-red {
++				marvell,pins = "mpp29";
++				marvell,function = "gpio";
++			};
++
++			pmx_led_hdd_green: pmx-led-hdd-green {
++				marvell,pins = "mpp41";
++				marvell,function = "gpio";
++			};
++
++			pmx_led_hdd_red: pmx-led-hdd-red {
++				marvell,pins = "mpp42";
++				marvell,function = "gpio";
++			};
++
++			pmx_unknown: pmx-unknown {
++				marvell,pins = "mpp44";
++				marvell,function = "gpio";
++			};
++
++		};
++
++		i2c@11000 {
++			status = "okay";
++
++			lm85@2e {
++				compatible = "national,lm85";
++				reg = <0x2e>;
++			};
++		};
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++		pinctrl-0 = <&pmx_led_esata_green &pmx_led_esata_red
++			     &pmx_led_usb_green &pmx_led_usb_red
++			     &pmx_led_sys_green &pmx_led_sys_red
++			     &pmx_led_copy_green &pmx_led_copy_red
++			     &pmx_led_hdd_green &pmx_led_hdd_red>;
++		pinctrl-names = "default";
++
++		green-sys {
++			label = "nsa310:green:sys";
++			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
++		};
++		red-sys {
++			label = "nsa310:red:sys";
++			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
++		};
++		green-hdd {
++			label = "nsa310:green:hdd";
++			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
++		};
++		red-hdd {
++			label = "nsa310:red:hdd";
++			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
++		};
++		green-esata {
++			label = "nsa310:green:esata";
++			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
++		};
++		red-esata {
++			label = "nsa310:red:esata";
++			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
++		};
++		green-usb {
++			label = "nsa310:green:usb";
++			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
++		};
++		red-usb {
++			label = "nsa310:red:usb";
++			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
++		};
++		green-copy {
++			label = "nsa310:green:copy";
++			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
++		};
++		red-copy {
++			label = "nsa310:red:copy";
++			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
++		};
++	};
++};
diff --git a/...ux/kirkwood/patches-4.4/190-nsa310s.patch → ...ux/kirkwood/patches-4.4/192-nsa310s.patch b/...ux/kirkwood/patches-4.4/190-nsa310s.patch → ...ux/kirkwood/patches-4.4/192-nsa310s.patch
@@ -1,3 +1,13 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -204,6 +204,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ 	kirkwood-nsa310.dtb \
+ 	kirkwood-nsa310a.dtb \
+ 	kirkwood-nsa310b.dtb \
++	kirkwood-nsa310s.dtb \
+ 	kirkwood-openblocks_a6.dtb \
+ 	kirkwood-openblocks_a7.dtb \
+ 	kirkwood-openrd-base.dtb \
 --- /dev/null
 +++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts
 @@ -0,0 +1,287 @@
@@ -288,13 +298,3 @@
 +		phy-handle = <&ethphy0>;
 +	};
 +};
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -203,6 +203,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- 	kirkwood-ns2mini.dtb \
- 	kirkwood-nsa310.dtb \
- 	kirkwood-nsa310a.dtb \
-+	kirkwood-nsa310s.dtb \
- 	kirkwood-openblocks_a6.dtb \
- 	kirkwood-openblocks_a7.dtb \
- 	kirkwood-openrd-base.dtb \