Create Package v20.1.1 (Forge 1.20.1)

Create Package v20.1.1 (Forge 1.20.1)

English

• Fully ported the v0.0.3 feature set to Forge 1.20.1 with AE2 15.4.10 and Create 6.0.8.
• Added the Extended Kinetic Pattern Provider with up to 9 pages and 36 pattern slots per page, using the ExtendedAE 1.20.1 interface resources.
• Added machine compatibility for Create Crafts & Additions, Create Diesel Generators, Vintage Improvements, Create Metallurgy, Create Bitterballen, and Create Confectionery.
• Improved parallel processing, capacity calculation, failure compensation, item/fluid recovery, and retry handling.
• Fixed Kinetic Pattern Provider screens, mirrored upgrade slots, WCWT mechanical package pattern re-encoding, and non-consuming stamping template behavior.

---

中文

• 将 v0.0.3 功能完整迁移到 Forge 1.20.1 / AE2 15.4.10 / Create 6.0.8。
• 新增扩展动力样板供应器，支持最多 9 页、每页 36 个样板槽位，并使用 ExtendedAE 1.20.1 界面资源。
• 增加 Create Crafts & Additions、Create Diesel Generators、Vintage Improvements、Create Metallurgy、Create Bitterballen、Create Confectionery 等机器兼容。
• 强化并行任务、容量计算、失败补偿、物品与流体回收及重试机制。
• 修复动力样板供应器界面、升级卡槽镜像、WCWT 重新编码机械封包样板、压印模板不消耗字段等兼容问题。

Create Package v0.0.3

English

1. Added the Extended Kinetic Pattern Provider with configurable 36-slot pages; one page is enabled by default.
2. Added Kinetic Pattern Provider support for verified machines from Vintage Improvements, Create Metallurgy, Create Bitterballen, Create Confectionery, Create Crafts & Additions, and Create Diesel Generators.
3. Optimized smart batching to calculate batch sizes from each machine's actual item/fluid capacity and avoid enabling it for incompatible machine types.
4. Fixed item loss when the AE network can only accept part of an output; remaining products are saved and retried after reload.
5. Fixed incorrect network-tool slot rendering in the Package Distributor and Kinetic Pattern Provider screens.
6. Adjusted the Package Distributor collision shape.

中文

1. 增加扩展动力样板供应器：支持可配置的 36 槽分页，默认开放 1 页。
2. 增加动力样板供应器对 Vintage Improvements、Create Metallurgy、Create Bitterballen、Create Confectionery、Create Crafts & Additions 和 Create Diesel Generators 已验证机器的兼容。
3. 优化智能批量：按不同机器的真实物品/流体容量计算批次，并避免在不适用的机器类型上错误启用。
4. 修复 AE 网络只能接收部分产物时可能丢失的问题：剩余产物会保存并在重新载入后继续重试。
5. 修复封包分发器和动力样板供应器界面网络工具槽位显示错误的问题。
6. 修改封包分发器碰撞箱设定。

Create Package v0.0.2

English

1. Machine Linker, Mechanical Pattern Converter, and Mechanical Package Pattern now support G auto-routing, including optional same-height L-shaped corridors.
2. Ordered routes now have Append / Edit modes (toggle by left-clicking air). Edit mode supports wheel selection, replacement/removal, and expected-material hints when the AE pattern and sequenced-assembly recipe can be resolved.
3. Partial supply failures now roll back where possible; timeouts, refill/pending retries, auto-route limits, and notice radius are server-configurable.
4. Mechanical Package Patterns with the same recipe but different saved routes now dispatch across idle, non-overlapping assembly lines instead of repeatedly selecting one route.
5. Each Parallel Card provides 4 job slots by default: 0 / 1 / 2 cards allow 1 / 4 / 8 concurrent jobs; capacity per card is server-configurable.
6. Cancelling an AE craft now clears stale missing-refill notices from Package Distributors.
7. Kinetic Pattern Providers now support fluid primary outputs and recover fluid products/byproducts.
8. Smart batching now covers mixers and basin feeds, allowing large fluid orders to refill in full batches.

中文

1. 机器连接器 / 机械样板转换器 / 机械封包样板支持 G 自动路线；可选同高度 L 形走廊。
2. 有序路线新增 追加 / 编辑 模式（左键空气切换）。编辑模式支持滚轮选点、替换/删除，并在能解析 AE 样板与序列组装配方时显示预期材料。
3. 供料中途失败会尽量回滚；超时、补刷/挂起重试、自动路线限制与提示半径可服务端配置。
4. 同配方、不同已保存路线的机械封包样板会分派到空闲且互不重叠的装配线，不再反复选中同一路线。
5. 并行卡默认每张提供 4 个作业位：0 / 1 / 2 张对应 1 / 4 / 8 并行；每张容量可由服务端配置。
6. AE 取消合成后，封包分发器会清掉残留缺料提示。
7. 动力样板供应器支持流体主产物，并回收流体产物/副产物。
8. 智能批量覆盖搅拌机/工作盆，大额流体订单可整批补满。