3.4: cannot build uImage

[madr]

I try to build uImage on a Debian box, which is prepared like this (How To Build Debian From Source Code for Mele):

apt-get install emdebian-archive-keyring
apt-get install gcc-4.4-arm-linux-gnueabi
apt-get build-essential git
apt-get uboot-mkimage
apt-get libusb-1.0-0-dev

I am following the guide at FirstSteps and have done all instructions without errors.

make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- sun4i_defconfig works, but make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- -j5 uImage fails:

  LD      .tmp_vmlinux1
arch/arm/common/built-in.o: In function `sp804_get_clock_rate':
timer-sp.c:(.init.text+0x31c): undefined reference to `clk_get_sys'
timer-sp.c:(.init.text+0x364): undefined reference to `clk_put'
timer-sp.c:(.init.text+0x398): undefined reference to `clk_put'
arch/arm/mach-versatile/built-in.o: In function `versatile_init_early':
versatile_ab.c:(.init.text+0x134): undefined reference to `clkdev_add_table'
drivers/built-in.o: In function `clcdfb_remove':
hid-input.c:(.text+0xd790): undefined reference to `clk_put'
drivers/built-in.o: In function `clcdfb_probe':
hid-input.c:(.text+0xdc70): undefined reference to `clk_get'
hid-input.c:(.text+0xde04): undefined reference to `clk_put'
drivers/built-in.o: In function `amba_get_enable_pclk':
hid-input.c:(.text+0xe448): undefined reference to `clk_get'
hid-input.c:(.text+0xe470): undefined reference to `clk_put'
drivers/built-in.o: In function `amba_put_disable_pclk':
hid-input.c:(.text+0xe49c): undefined reference to `clk_put'
drivers/built-in.o: In function `pl011_remove':
hid-input.c:(.text+0x2b6c4): undefined reference to `clk_put'
drivers/built-in.o: In function `pl011_probe':
hid-input.c:(.text+0x2c234): undefined reference to `clk_get'
hid-input.c:(.text+0x2c318): undefined reference to `clk_put'
drivers/built-in.o: In function `enable_clock':
hid-input.c:(.text+0x3a004): undefined reference to `clk_get'
hid-input.c:(.text+0x3a01c): undefined reference to `clk_put'
drivers/built-in.o: In function `disable_clock':
hid-input.c:(.text+0x3a044): undefined reference to `clk_get'
hid-input.c:(.text+0x3a05c): undefined reference to `clk_put'
drivers/built-in.o: In function `__pm_clk_remove':
hid-input.c:(.text+0x3a1b8): undefined reference to `clk_put'
drivers/built-in.o: In function `pm_clk_add':
hid-input.c:(.text+0x3a424): undefined reference to `clk_get'
drivers/built-in.o: In function `mmc_io_rw_extended':
hid-input.c:(.text+0x6d9ac): undefined reference to `sunximmc_check_r1_ready'
drivers/built-in.o: In function `amba_kmi_probe':
hid-input.c:(.devinit.text+0x8bc): undefined reference to `clk_get'
drivers/built-in.o: In function `amba_kmi_remove':
hid-input.c:(.devexit.text+0xd4): undefined reference to `clk_put'
make: *** [.tmp_vmlinux1] Fel 1

Here is a complete dump: http://pastie.org/5351582

The targets modules and modules_install works fine. Revision: 29c9109 "net: sun4i-wemac: fix support for NULL emac_power "

[madr]

hard-reset back to tag "v3.5" works, appearently.

[amery]

what? we have 3.0 and 3.4 branches. resetting to v3.5 send you out of the sunxi kernel.

[madr]

Ooops, my bad.

Anyway, hard-reseting back to origin/sunxi-3.4 results in the error already described. Should I reset to an older commit in the 3.4 branch?

[amery]

please paste your .config somewhere

[madr]

http://pastie.org/5352218

[amery]

that is from a 3.0.42, not 3.4.5

[romanrm]

Also this is not a config for an Allwinner device:

CONFIG_ARCH_VERSATILE=y

but rather for http://www.arm.com/products/tools/development-boards/versatile/index.php

[madr]

I have cloned a fresh linux-sunxi and checked out to sunxi-3.4 now, this is the .config it generated after I restarted fresh:

http://pastie.org/5352502

I also found out, thanks to @romanrm, I have mistakenly written defconfig instead of sun4i_defconfig.

Running sun4i_defconfig and then uImage, however, still do not create the uImage file. This is the log:

http://pastie.org/5352569

[amery]

just fixed that. update

[madr]

Worked like a charm now! THANK YOU!