m5-controller

Home automation controller in erlang on M5 stack.

Uses AtomVM with AtomVM support for M5 (https://github.com/pguyot/atomvm_m5).

Controls Shelly Plugs using a very simple menu system on the M5 stack.

The configuraion of the Wifi settings and the Shelly Plugs names and IP addresses are in the code, in main.erl.

Build instructions

Follow the installation instructions in https://github.com/pguyot/atomvm_m5.

Before running idf.py build do:

cd /home/mbj/src/AtomVM/src/platforms/esp32
# optionally
idf.py menuconfig
# re-generate CMakeFiles
idf.py reconfigure
# build the vm
idf.py build

# create an image w/ bootloader, partition-table and vm
build/mkimage.sh

# if the device is newly created, and the user is not part of correct group...
sudo chmod a+rw /dev/ttyACM0

esptool.py --chip esp32 --port /dev/ttyACM0 erase_flash

build/flashimage.sh -p /dev/ttyACM0