No Bluetooth code on first startup

[amorse1992-hub]

I recently converted two of my devices-both heltec v4 from Meshtastic to MeshCore firmware. It seems to flash just fine on first start up. There’s an approximately 60 second “loading…” screen and it goes straight to the welcome screen without displaying a Bluetooth code. In the app when I go and search for the device, nothing is displayed. I “forgot” the Bluetooth connections from before and restarted both phone and node with no positive changes.

[oltaco]

It shouldn't take 60 seconds to get past the loading screen, have you tried running a flash erase from the MeshCore web flasher?

Note that you must use the MeshCore flash erase because we use an extra filesystem area that meshtastic does not have.

[MGJ520]

see #1536

[github-actions]

This issue is stale because it has been open for 60 days with no activity. Remove the stale label or add a comment if this issue is still relevant, otherwise this issue will automatically close in 7 days.

[liamcottle]

Closing out as OP didn't follow up with requested info.

[aj4rj]

Same issue no nodes picked up BLE Scan. Tried all of the hacks and no avail, not going to walk around with a USB cable and radio.. Going back to Meshtastic... will come back on next version and try.