Add support for Keepteen LT1

boards/keepteen_lt1.json

@@ -0,0 +1,79 @@
+{
+    "build": {
+      "arduino":{
+        "ldscript": "nrf52840_s140_v6.ld"
+      },
+      "core": "nRF5",
+      "cpu": "cortex-m4",
+      "extra_flags": "-DARDUINO_NRF52840_FEATHER -DNRF52840_XXAA",
+      "f_cpu": "64000000L",
+      "hwids": [
+        [
+          "0x239A",
+          "0x00B3"
+        ],
+        [
+          "0x239A",
+          "0x8029"
+        ],
+        [
+          "0x239A",
+          "0x0029"
+        ],
+        [
+          "0x239A",
+          "0x002A"
+        ],
+        [
+          "0x239A",
+          "0x802A"
+        ]
+      ],
+      "usb_product": "Keepteen LT1",
+      "mcu": "nrf52840",
+      "variant": "Keepteen LT1",
+      "variants_dir": "variants",
+      "bsp": {
+        "name": "adafruit"
+      },
+      "softdevice": {
+        "sd_flags": "-DS140",
+        "sd_name": "s140",
+        "sd_version": "6.1.1",
+        "sd_fwid": "0x00B6"
+      },
+      "bootloader": {
+        "settings_addr": "0xFF000"
+      }
+    },
+    "connectivity": [
+      "bluetooth"
+    ],
+    "debug": {
+      "jlink_device": "nRF52840_xxAA",
+      "svd_path": "nrf52840.svd",
+      "openocd_target": "nrf52.cfg"
+    },
+    "frameworks": [
+      "arduino",
+      "zephyr"
+    ],
+    "name": "Keepteen LT1",
+    "upload": {
+      "maximum_ram_size": 248832,
+      "maximum_size": 815104,
+      "speed": 115200,
+      "protocol": "nrfutil",
+      "protocols": [
+        "jlink",
+        "nrfjprog",
+        "nrfutil",
+        "stlink"
+      ],
+      "use_1200bps_touch": true,
+      "require_upload_port": true,
+      "wait_for_upload_port": true
+    },
+    "url": "http://www.keepteen.com/",
+    "vendor": "Keepteen"
+  }

variants/keepteen_lt1/KeepteenLT1Board.cpp

@@ -0,0 +1,75 @@
+#include <Arduino.h>
+#include "KeepteenLT1Board.h"
+
+#include <bluefruit.h>
+#include <Wire.h>
+
+static BLEDfu bledfu;
+
+void KeepteenLT1Board::begin() {    
+    // for future use, sub-classes SHOULD call this from their begin()
+    startup_reason = BD_STARTUP_NORMAL;
+    btn_prev_state = HIGH;
+
+    pinMode(PIN_VBAT_READ, INPUT);
+
+    #if defined(PIN_BOARD_SDA) && defined(PIN_BOARD_SCL)
+      Wire.setPins(PIN_BOARD_SDA, PIN_BOARD_SCL);
+    #endif
+
+    Wire.begin();
+}
+
+static void connect_callback(uint16_t conn_handle) {
+    (void)conn_handle;
+    MESH_DEBUG_PRINTLN("BLE client connected");
+}
+
+static void disconnect_callback(uint16_t conn_handle, uint8_t reason) {
+    (void)conn_handle;
+    (void)reason;
+    MESH_DEBUG_PRINTLN("BLE client disconnected");
+}
+
+bool KeepteenLT1Board::startOTAUpdate(const char* id, char reply[]) {
+  // Config the peripheral connection with maximum bandwidth
+  // more SRAM required by SoftDevice
+  // Note: All config***() function must be called before begin()
+  Bluefruit.configPrphBandwidth(BANDWIDTH_MAX);
+  Bluefruit.configPrphConn(92, BLE_GAP_EVENT_LENGTH_MIN, 16, 16);
+
+  Bluefruit.begin(1, 0);
+  // Set max power. Accepted values are: -40, -30, -20, -16, -12, -8, -4, 0, 4
+  Bluefruit.setTxPower(4);
+  // Set the BLE device name
+  Bluefruit.setName("KeepteenLT1_OTA");
+
+  Bluefruit.Periph.setConnectCallback(connect_callback);
+  Bluefruit.Periph.setDisconnectCallback(disconnect_callback);
+
+  // To be consistent OTA DFU should be added first if it exists
+  bledfu.begin();
+
+  // Set up and start advertising
+  // Advertising packet
+  Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE);
+  Bluefruit.Advertising.addTxPower();
+  Bluefruit.Advertising.addName();
+
+  /* Start Advertising
+    - Enable auto advertising if disconnected
+    - Interval:  fast mode = 20 ms, slow mode = 152.5 ms
+    - Timeout for fast mode is 30 seconds
+    - Start(timeout) with timeout = 0 will advertise forever (until connected)
+
+    For recommended advertising interval
+    https://developer.apple.com/library/content/qa/qa1931/_index.html
+  */
+  Bluefruit.Advertising.restartOnDisconnect(true);
+  Bluefruit.Advertising.setInterval(32, 244); // in unit of 0.625 ms
+  Bluefruit.Advertising.setFastTimeout(30);   // number of seconds in fast mode
+  Bluefruit.Advertising.start(0);             // 0 = Don't stop advertising after n seconds
+
+  strcpy(reply, "OK - started");
+  return true;
+}

variants/keepteen_lt1/KeepteenLT1Board.h

@@ -0,0 +1,51 @@
+#pragma once
+
+#include <MeshCore.h>
+#include <Arduino.h>
+
+class KeepteenLT1Board : public mesh::MainBoard {
+protected:
+  uint8_t startup_reason;
+  uint8_t btn_prev_state;
+
+public:
+  void begin();
+
+  uint8_t getStartupReason() const override { return startup_reason; }
+
+  #define BATTERY_SAMPLES 8
+
+  uint16_t getBattMilliVolts() override {
+    analogReadResolution(12);
+
+    uint32_t raw = 0;
+    for (int i = 0; i < BATTERY_SAMPLES; i++) {
+      raw += analogRead(PIN_VBAT_READ);
+    }
+    raw = raw / BATTERY_SAMPLES;
+    return (ADC_MULTIPLIER * raw);
+  }
+
+  const char* getManufacturerName() const override {
+    return "Keepteen LT1";
+  }
+
+#if defined(P_LORA_TX_LED)
+  void onBeforeTransmit() override {
+    digitalWrite(P_LORA_TX_LED, HIGH);   // turn TX LED on
+  }
+  void onAfterTransmit() override {
+    digitalWrite(P_LORA_TX_LED, LOW);   // turn TX LED off
+  }
+#endif
+
+  void reboot() override {
+    NVIC_SystemReset();
+  }
+
+  void powerOff() override {
+    sd_power_system_off();
+  }
+
+  bool startOTAUpdate(const char* id, char reply[]) override;
+};

variants/keepteen_lt1/platformio.ini

@@ -0,0 +1,101 @@
+[KeepteenLT1]
+extends = nrf52_base
+board = keepteen_lt1
+build_flags = ${nrf52_base.build_flags}
+  -I variants/keepteen_lt1
+  -D KEEPTEEN_LT1
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=22
+  -D SX126X_CURRENT_LIMIT=140
+  -D SX126X_RX_BOOSTED_GAIN=1
+  -D PIN_BOARD_SDA=34
+  -D PIN_BOARD_SCL=36
+  -D ENV_INCLUDE_GPS=1
+build_src_filter = ${nrf52_base.build_src_filter}
+  +<helpers/sensors>
+  +<../variants/keepteen_lt1>
+lib_deps= ${nrf52_base.lib_deps}
+	adafruit/Adafruit SSD1306 @ ^2.5.13
+  stevemarple/MicroNMEA @ ^2.0.6
+
+[env:KeepteenLT1_repeater]
+extends = KeepteenLT1
+build_src_filter = ${KeepteenLT1.build_src_filter}
+  +<../examples/simple_repeater>
+  +<helpers/ui/SSD1306Display.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+build_flags =
+  ${KeepteenLT1.build_flags}
+  -D ADVERT_NAME='"KeepteenLT1 Repeater"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+  -D DISPLAY_CLASS=SSD1306Display
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+lib_deps = ${KeepteenLT1.lib_deps}
+  adafruit/RTClib @ ^2.1.3
+
+[env:KeepteenLT1_room_server]
+extends = KeepteenLT1
+build_src_filter = ${KeepteenLT1.build_src_filter}
+  +<../examples/simple_room_server>
+  +<helpers/ui/SSD1306Display.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+build_flags = ${KeepteenLT1.build_flags}
+  -D ADVERT_NAME='"KeepteenLT1 Room"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ROOM_PASSWORD='"hello"'
+  -D DISPLAY_CLASS=SSD1306Display
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+lib_deps = ${KeepteenLT1.lib_deps}
+  adafruit/RTClib @ ^2.1.3
+
+[env:KeepteenLT1_companion_radio_usb]
+extends = KeepteenLT1
+board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
+board_upload.maximum_size = 712704
+build_flags = ${KeepteenLT1.build_flags}
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D DISPLAY_CLASS=SSD1306Display
+; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
+; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
+build_src_filter = ${KeepteenLT1.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps = ${KeepteenLT1.lib_deps}
+  adafruit/RTClib @ ^2.1.3
+  densaugeo/base64 @ ~1.4.0
+
+[env:KeepteenLT1_companion_radio_ble]
+extends = KeepteenLT1
+board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
+board_upload.maximum_size = 712704
+build_flags = ${KeepteenLT1.build_flags}
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D BLE_PIN_CODE=123456
+  -D BLE_DEBUG_LOGGING=1
+  -D OFFLINE_QUEUE_SIZE=256
+  -D DISPLAY_CLASS=SSD1306Display
+;  -D MESH_PACKET_LOGGING=1
+  -D MESH_DEBUG=1
+build_src_filter = ${KeepteenLT1.build_src_filter}
+  +<helpers/nrf52/SerialBLEInterface.cpp>
+  +<helpers/ui/SSD1306Display.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps = ${KeepteenLT1.lib_deps}
+  adafruit/RTClib @ ^2.1.3
+  densaugeo/base64 @ ~1.4.0

variants/keepteen_lt1/target.cpp

@@ -0,0 +1,51 @@
+#include <Arduino.h>
+#include "target.h"
+#include <helpers/ArduinoHelpers.h>
+
+KeepteenLT1Board board;
+
+RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
+
+WRAPPER_CLASS radio_driver(radio, board);
+
+VolatileRTCClock fallback_clock;
+AutoDiscoverRTCClock rtc_clock(fallback_clock);
+#if ENV_INCLUDE_GPS
+  #include <helpers/sensors/MicroNMEALocationProvider.h>
+  MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1);
+  EnvironmentSensorManager sensors = EnvironmentSensorManager(nmea);
+#else
+  EnvironmentSensorManager sensors;
+#endif
+
+#ifdef DISPLAY_CLASS
+  DISPLAY_CLASS display;
+  MomentaryButton user_btn(PIN_USER_BTN, 1000, true, true);
+#endif
+
+bool radio_init() {
+  rtc_clock.begin(Wire);
+
+  return radio.std_init(&SPI);
+}
+
+uint32_t radio_get_rng_seed() {
+  return radio.random(0x7FFFFFFF);
+}
+
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
+  radio.setFrequency(freq);
+  radio.setSpreadingFactor(sf);
+  radio.setBandwidth(bw);
+  radio.setCodingRate(cr);
+}
+
+void radio_set_tx_power(uint8_t dbm) {
+  radio.setOutputPower(dbm);
+}
+
+mesh::LocalIdentity radio_new_identity() {
+  RadioNoiseListener rng(radio);
+  return mesh::LocalIdentity(&rng);  // create new random identity
+}
+

variants/keepteen_lt1/target.h

@@ -0,0 +1,30 @@
+#pragma once
+
+#define RADIOLIB_STATIC_ONLY 1
+#include <RadioLib.h>
+#include <helpers/radiolib/RadioLibWrappers.h>
+#include <KeepteenLT1Board.h>
+#include <helpers/radiolib/CustomSX1262Wrapper.h>
+#include <helpers/AutoDiscoverRTCClock.h>
+#ifdef DISPLAY_CLASS
+  #include <helpers/ui/SSD1306Display.h>
+  #include <helpers/ui/MomentaryButton.h>
+#endif
+
+#include <helpers/sensors/EnvironmentSensorManager.h>
+
+extern KeepteenLT1Board board;
+extern WRAPPER_CLASS radio_driver;
+extern AutoDiscoverRTCClock rtc_clock;
+extern EnvironmentSensorManager sensors;
+
+#ifdef DISPLAY_CLASS
+  extern DISPLAY_CLASS display;
+  extern MomentaryButton user_btn;
+#endif
+
+bool radio_init();
+uint32_t radio_get_rng_seed();
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr);
+void radio_set_tx_power(uint8_t dbm);
+mesh::LocalIdentity radio_new_identity();