v0.3.2

wiview v0.3.2

Flash Instructions

1. Download wiview-full.bin
2. Put Cardputer-Adv in download mode (power OFF, hold G0, power ON)
3. Flash: esptool.py --chip esp32s3 --port /dev/cu.usbmodem* write_flash 0x0 wiview-full.bin

Files

• wiview-full.bin — Merged binary for one-line esptool flash
• firmware.bin — Application firmware (flash at 0x10000)
• bootloader.bin — Bootloader (flash at 0x0)
• partitions.bin — Partition table (flash at 0x8000)

See README for full instructions.