Custom PCB
Due to a design issue, Rev.0 is retired. The 12v input doesn't have a connection to the motor nor the ULN2003. Also, the ground trace is too small and runs through 2 vias. Image is just for historical reference.
R1-R3 : Button Resistors
R4 : Pulldown, Button (10K)
R5 : LED, Current Limiting
F1 : 2A
F2 : 1A
IC1 : ULN2003
C1 : Ceramic Capacitor
Q1 : N-Channel MOSFET
J1 : Motor Connection
J2 : WS2812 Connection
J3-J4 : D1 Mini Connection
J5 : 12v In
J6 : 12v LED Strip
5v Buck : 5v Buck Regulator (Feeds D1 and J2)
5v Select : Open Isolates Motor Driver 12v from D1 5v
: Closed Powers From D1 5v (USB)
R1-R3 : Button Resistors
R4 : Pulldown, Button (10K)
R5 : LED, Current Limiting
R6 : PWM Pulldown (10K)
F1 : 2A (12v)
F2 : 1A (5v)
IC1 : ULN2003
C1 : Ceramic Capacitor
Q1 : N-Channel MOSFET
J1 : Motor Connection
J2 : WS2812 Connection
J3-J4 : D1 Mini Connection
J5 : 12v In
J6 : 12v LED Strip
5v Buck : 5v Buck Regulator (Feeds D1 and J2)
ONLY USE ONE JUMPER AT A TIME, OR YOUR D1 WILL DIE!!
J5v : Jumper for 5v Operation
J12v : Jumper for 12v Operation