MeshCore DeskOS D1L 1.2.0 RC2

DeskOS 1.2/RC2 is the public D1L release focused on the working daily-use paths.

What changed:

• Selecting #Public now opens the Public conversation immediately.
• Contacts now support search, Recent/A-Z/Role/Signal sorting, direct messages, and managed-node actions.
• The README and roadmap now reflect 1.2/RC2, with actual-device screenshots including a fully loaded 9/9 local-tile Map.

Choose one ESP32-S3 path:

• UPDATE-existing-deskos-at-0x20000.bin preserves an existing DeskOS installation.
• FRESH-CLEAN-full-8mb-at-0x0.bin is the clean first-install/recovery image for a device with no prior DeskOS.

The RP2040 UPDATE-OR-FRESH.uf2 is the same complete bridge firmware for either path. The ZIP contains the complete package, scripts, docs, notices, provenance, and checksums. Start with START_HERE-1.2.0.md.

Built from 083a45e616e42085439a239e091cc7353bef24b0 by Actions run 31268909378. The attached D1L reports version 1.2.0 from that exact commit.

MeshCore DeskOS D1L 1.0.1

Stable DeskOS 1.0.1 for SenseCAP Indicator D1L. Download the ZIP and choose UPDATE EXISTING DESKOS or FRESH CLEAN INSTALL in START_HERE-1.0.1.md. The update BIN writes the DeskOS application at 0x20000 and preserves existing DeskOS data. The full-clean 8 MB BIN writes at 0x0 for blank devices, devices running other firmware, or an intentional clean start. The same complete RP2040 UF2 is used for either path.

MeshCore DeskOS D1L 1.0.0

Stable DeskOS 1.0 for the SenseCAP Indicator D1L.

Download MeshCore-DeskOS-D1L-1.0.0.zip, extract it completely, and open START_HERE.md. The release also provides standalone ESP32 BIN files, the production RP2040 SD-bridge UF2, and SHA-256 checksums.

Mesh use does not require project Wi-Fi credentials, an admin password, or a project-operated peer.

MeshCore DeskOS D1L 1.0.0 RC1

Production DeskOS 1.0 RC1 for the SenseCAP Indicator D1L.

Download MeshCore-DeskOS-D1L-1.0.0.zip, extract it completely, and open START_HERE.md. The release also provides standalone ESP32 BIN files, the production RP2040 SD-bridge UF2, and SHA-256 checksums.

Mesh use does not require project Wi-Fi credentials, an admin password, or a project-operated peer.