Skip to content

NeonPocketMC ULP Solar Repeaters v1.0.0-rc.2

Pre-release
Pre-release

Choose a tag to compare

View all tags
@n30nex n30nex released this 22 Aug 23:33
v1.0.0-rc.2
f1ad326
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Verified
Learn about vigilant mode.

NeonPocketMC ULP Solar Repeaters v1.0.0-rc.2

Experimental ultra-low-power MeshCore repeater firmware for ten supported NeonPocketMC profiles.

Fixed in RC2

  • Saved coordinates can now be explicitly shared in adverts on every ULP profile, including boards without a physical GPS.
  • The guided USB configurator asks whether to advertise saved coordinates, accepts latitude/longitude when requested, and verifies the resulting policy.
  • RCC6 rejects impossible one-cell battery readings above 4.50 V instead of displaying values such as 7.45 V. TFT builds show battery data as unavailable when the ADC reading is invalid.
  • Documentation now makes the onboarding boundary explicit: ULP firmware is configured over USB serial and does not start a Wi-Fi access point or WebUI.

Install safely

  • ESP32 app images are normal updates flashed at 0x10000. Full-recovery images are flashed at 0x0 only when recovery is actually required.
  • nRF52 users should copy only the UF2 matching their exact board. Do not replace the bootloader or SoftDevice.
  • Confirm the board name in the filename before flashing.
  • Run NeonPocketMC-ULP-Configurator.zip while the device is still connected by USB.

Qualification

  • Exact source: f1ad326267618d03027a745258a2b5718d098d7d
  • Exact-main build: GitHub Actions run 32605100370
  • Exact-main tests: GitHub Actions run 32605100348
  • All ten firmware profiles and the aggregate release bundle passed CI.
  • This release has not received a fresh physical test on every supported board; it remains an experimental prerelease.

SHA256SUMS.txt covers every attached distributable.

Assets 25
Loading