XR1710G U-Boot-2026-9-2-gf39d75bc85dc

Automated build from commit f39d75bc85dc.

Artifact source run: 33603754602

自适应中英文界面

Release channel: release

Files

• xr1710g-uboot-2026-9-2-f39d75bc85dc-flash-slot.bin — Flash through the HTTP Recovery uboot target.
• xr1710g-uboot-2026-9-2-f39d75bc85dc-chainloader.itb — RAM-only validation through TFTP. Do not upload this file to HTTP Recovery.

SHA256

a38c54999d74364641f8fdbefdf148d41f9deb0f9b1b580bf2ed7ec36bfb0548  xr1710g-uboot-2026-9-2-f39d75bc85dc-flash-slot.bin
80bde5dd61a29d477ecbc334989f3a84822dce51c43b19e4c503889c7a85a0ed  xr1710g-uboot-2026-9-2-f39d75bc85dc-chainloader.itb

Flash via HTTP Recovery

1. Connect the PC to the device's 10GbE port and enable DHCP.
2. Connect the device to power.
3. Wait for the front red LED to light up.
4. Within 5 seconds, use a pin to press and hold the recessed RESET button.
5. Keep holding until the front LEDs turn off and then light up again.
6. Release the RESET button when the LEDs begin cycling in an alternating rainbow breathing pattern.
7. Open http://192.168.255.1.
8. Select the uboot target.
9. Upload xr1710g-uboot-2026-9-2-f39d75bc85dc-flash-slot.bin and wait for flashing to complete.

Important: Do not power off, disconnect, or reboot the device during recovery!

---

Donate

如果这个项目对您有所帮助，欢迎请我喝杯咖啡，支持后续维护和更新。

XR1710G U-Boot-2026-8-10-g2035a514b3fa

Automated build from commit 2035a51

支持从web界面重启进入Recovery ，需要配合2026-8-10以后的固件
固件下载地址
https://github.com/naoki66/ImmortalWrt-for-Gemtek-XR1710G/releases

Files

• flash-slot.bin — Flash through HTTP Recovery uboot target
• chainloader.itb — RAM-only validation via TFTP

SHA256

b1e6505cf0027fdb172afd354a9767e8f7ff7e8de6811abe538068b1667bc9ea xr1710g-uboot-2026-8-10-2035a514b3fa-flash-slot.bin
edf30f7f705b197515b59f7121853a1d68fbf1d1c53c3f1ab32c31a1ba2e1b22 xr1710g-uboot-2026-8-10-2035a514b3fa-chainloader.itb

Flash via HTTP Recovery

1. Connect PC to 10GbE port (DHCP mode)
2. Hold reset button until LED shows recovery pattern
3. Open http://192.168.255.1
4. Select uboot target, upload flash-slot.bin

Donate

如果您觉得对您有帮助，请我喝杯咖啡吧，让我更有动力持续更新。

XR1710G U-Boot-2026-8-8-g93da8f980ef0

Automated build from commit 93da8f9

Files

• flash-slot.bin — Flash through HTTP Recovery uboot target
• chainloader.itb — RAM-only validation via TFTP

SHA256

8687289425eb220f56fe5c367bd1dca731435db4e65cbbf18dd4ca14e2a0bc39 xr1710g-uboot-2026-8-8-93da8f980ef0-flash-slot.bin
4ed37a6b9a4cb0a481fab6c12508409320130854a78f8aab38b71c23bdf4497d xr1710g-uboot-2026-8-8-93da8f980ef0-chainloader.itb

Flash via HTTP Recovery

1. Connect PC to 10GbE port (DHCP mode)
2. Hold reset button until LED shows recovery pattern
3. Open http://192.168.255.1
4. Select uboot target, upload flash-slot.bin

Donate

如果您觉得对您有帮助，请我喝杯咖啡吧，让我更有动力持续更新。

XR1710G U-Boot-2026-8-8-g8eac1da35729

Automated build from commit 8eac1da
修复：
1，内核启动rdinit=/init failed: -2 警告。
2.sync上游YYH2913新的刷机逻辑：
上传完成 -> 返回响应 -> 等待浏览器 ACK -> 开始刷写
-> 失败/超时则取消刷写
3.补全dhcp服务器信息，尝试修复部分win11无法获得IP问题。

Files

• flash-slot.bin — Flash through HTTP Recovery uboot target
• chainloader.itb — RAM-only validation via TFTP

SHA256

3c0f5e2c630ddc0bd87a729f6c2f382d2d227de2d33ffa1cd666932018e23356 xr1710g-uboot-v2026.07-XR1710G-2026-8-8-g8eac1da35729-flash-slot.bin
77bbefd717f499aadfdffcc418dad52ef9155996d7ddaf4a993603cd9c23fcb5 xr1710g-uboot-v2026.07-XR1710G-2026-8-8-g8eac1da35729-chainloader.itb

Flash via HTTP Recovery

1. Connect PC to 10GbE port (DHCP mode)
2. Hold reset button until LED shows recovery pattern
3. Open http://192.168.255.1
4. Select uboot target, upload flash-slot.bin

Donate

如果您觉得对您有帮助，请我喝杯咖啡吧，让我更有动力持续更新。

XR1710G U-Boot-2026-8-8-g8458467e7133

Automated build from commit 8458467

Files

• flash-slot.bin — Flash through HTTP Recovery uboot target
• chainloader.itb — RAM-only validation via TFTP

SHA256

464508ce0c1242379915c4eb2c9339f83b51b364194bbfc51de4dffdc597ea89 xr1710g-uboot-v2026.07-XR1710G-2026-8-8-g8458467e7133-flash-slot.bin
3835b42ffbd1bf247a80c34397c62967c75565a1504eb451c26fb9ba83ba1232 xr1710g-uboot-v2026.07-XR1710G-2026-8-8-g8458467e7133-chainloader.itb

Flash via HTTP Recovery

1. Connect PC to 10GbE port (DHCP mode)
2. Hold reset button until LED shows recovery pattern
3. Open http://192.168.255.1
4. Select uboot target, upload flash-slot.bin

Donate

如果您觉得对您有帮助，请我喝杯咖啡吧，让我更有动力持续更新。

XR1710G U-Boot-2026-7-18-g10dfaca0c463

尝试修复网络错误问题 commit 10dfaca

U‑Boot 刷机进入方法

1.设备断电，网线接入 10G LAN2 网口
2.接通电源，等待设备正面红色状态灯点亮
3.按住 Reset 复位按键不松手
4.持续按住直到正面指示灯切换为彩虹色呼吸灯
5.松开 Reset 按键
6.将电脑网卡设置为自动HDCP获取 （理论应该获得192.168.255.2 IP，部分系统需要手动设置）
7.浏览器访问地址：http://192.168.255.1 进入 U‑Boot 刷机页面

Files

• flash-slot.bin — Flash through HTTP Recovery uboot target
• chainloader.itb — RAM-only validation via TFTP

SHA256

ef94755e05a3f2f33f678979a31b66361c06ce45f867466f12644f19cf484f72 xr1710g-uboot-v2026.07-g10dfaca0c463-flash-slot.bin
17c746bb4b4888f33630ed91402b18efbc9bcc4fdad1836692c6610676a6f692 xr1710g-uboot-v2026.07-g10dfaca0c463-chainloader.itb

Flash via HTTP Recovery

1. Connect PC to 10GbE port (DHCP mode)
2. Hold reset button until LED shows recovery pattern
3. Open http://192.168.255.1
4. Select uboot target, upload flash-slot.bin

Donate

如果您觉得对您有帮助，请我喝杯咖啡吧，让我更有动力持续更新。

XR1710G U-Boot-2026-7-16-g679630890fc8

Automated build from commit 6796308

尝试修复win11下无法获得IP的问题

Files

• flash-slot.bin — Flash through HTTP Recovery uboot target
• chainloader.itb — RAM-only validation via TFTP

SHA256

4198c3707917adc029c12f224d0713c387e75e86363d659b541d6a4d7d2b4cf8 xr1710g-uboot-v2026.07-g679630890fc8-flash-slot.bin
9dc7dbe3c77ac243aa226574eb2b99d8ffab1cf37efb1d8ca4eadb0e8b328f64 xr1710g-uboot-v2026.07-g679630890fc8-chainloader.itb

Flash via HTTP Recovery

1. Connect PC to 10GbE port (DHCP mode)
2. Hold reset button until LED shows recovery pattern
3. Open http://192.168.255.1
4. Select uboot target, upload flash-slot.bin

Donate

如果您觉得对您有帮助，请我喝杯咖啡吧，让我更有动力持续更新。

XR1710G U-Boot-2026-7-16-g05dabd4c31c0

Automated build from commit 05dabd4

Files

• flash-slot.bin — Flash through HTTP Recovery uboot target
• chainloader.itb — RAM-only validation via TFTP

SHA256

148b352acd9779ed27e8a00c9739059ad6432de659c256f58e798771dae75473 xr1710g-uboot-v2026.07-g05dabd4c31c0-flash-slot.bin
163fec326c56f70ef0d7166c985a4dba26f3254bf39c4856a1ed289ebb36daf8 xr1710g-uboot-v2026.07-g05dabd4c31c0-chainloader.itb

Flash via HTTP Recovery

1. Connect PC to 10GbE port (DHCP mode)
2. Hold reset button until LED shows recovery pattern
3. Open http://192.168.255.1
4. Select uboot target, upload flash-slot.bin

Donate

如果您觉得对您有帮助，请我喝杯咖啡吧，让我更有动力持续更新。