Skip to content

v2.3.0

Choose a tag to compare

View all tags
@nerdaxic nerdaxic released this 02 Jul 12:10
v2.3.0
1950a94

Optoma Link 2.3.0

More device details, a smarter setup, and clearer docs, from a third round of UHZ68LV hardware testing.

Added

  • The projector's MAC address now shows in the device's Connections, and its reported IP address is used for the device's "Visit" link.
  • New diagnostic entities: IP Address and Projector ID.
  • Software version now appears on the device card (as Firmware). It is no longer a separate sensor.

Changed

  • Setup now warns you when the projector is in Eco standby, because in that mode it stops answering Power On commands over the network after a while powered off. The warning tells you how to switch it to Active.
  • Setup checklist now starts with "turn the projector on", since it must be on during setup.
  • The device name now defaults to "Projector" instead of the brand and model. Rename it to something like "Living Room Projector" and your entity IDs and voice commands stay short and readable.
  • Clearer message when a 3D Format change is refused: turn on 3D first, and make sure the source is 1080p.

Docs

  • The README now explains how local polling works, and why some write-only controls (like 3D and Light Source Power) read Unknown until you set them from Home Assistant.
Assets 2
Loading