Support for Adafruit SH1107 128x64 OLED #358
Description
Hello @neu-rah,
I am having trouble with interfacing your library to the Adafruit SH1107 128x64 OLED.
The menu system and scrolling through the options work but somehow it is not rendered properly on the screen.
The code was just one from the example codes listed for SSD1306 ButtonNavigation.
Could @neu-rah or someone help me with properly interfacing it with SH1107?
Thanks!
`
/**************************************************************************
Sketch: MENU NAVIGATION WITH JUST 4 BUTTONS
This Sketch displays Menu without any Serial Communication and the
navigation is performed by 4 buttons attached to D3, D8, D4 and D1.
Also, attach led on D11 to control brightness from menu.
Default brightness is 15% (check line 78)
NOTE: By default, navigation buttons use INTERNAL_PULLUP feature.
This can be changed by commenting the line 45 in "config.h" file
Uses SSD1306Ascii Library(https://github.com/greiman/SSD1306Ascii)
by Bill Grieman
Created by Tamojit Saha
Github: https://github.com/TamojitSaha
Website: https://www.tamojitsaha.info/
***************************************************************************/
#include <Arduino.h>
#include <analogWrite.h>
// #include <Wire.h>
#include "SSD1306Ascii.h"
#include "SSD1306AsciiWire.h"
#include <menu.h>
#include <menuIO/SSD1306AsciiOut.h>
#include <menuIO/keyIn.h>
//#include <menuIO/chainStream.h>
using namespace Menu;
SSD1306AsciiWire oled;
#include "config.h"
int ledCtrl = HIGH; //Default LED State of LED at D11 is LOW
result doAlert(eventMask e, prompt &item);
result showEvent(eventMask e, navNode& nav, prompt& item) {
return proceed;
}
result action1(eventMask e) {
return proceed;
}
result action2(eventMask e, navNode& nav, prompt &item) {
//Serial.print(e);
//Serial.println(" action2 executed, quiting menu");
return quit;
}
result ledOn() {
ledCtrl = HIGH;
analogWrite(LED_PIN, 255);
return proceed;
}
result ledOff() {
ledCtrl = LOW;
analogWrite(LED_PIN, 0);
return proceed;
}
result internalLedOn() {
digitalWrite(LED_BUILTIN, HIGH);
return proceed;
}
result internalLedOff() {
analogWrite(LED_BUILTIN, LOW);
return proceed;
}
int brightnessValue = 15; //Default LED brightness value
result adjustBrightness() {
if (ledCtrl == HIGH) {
int pwm = int(2.55 * float(brightnessValue));
analogWrite(LED_PIN, pwm);
}
return proceed;
}
TOGGLE(ledCtrl, setLed, "Led: ", doNothing, noEvent, noStyle //,doExit,enterEvent,noStyle
, VALUE("On", HIGH, ledOn, enterEvent)//ledOn function is called
, VALUE("Off", LOW, ledOff, enterEvent)//ledOff function is called
);
int selTest = 0;
SELECT(selTest, selMenu, "Select", doNothing, noEvent, noStyle
, VALUE("Zero", 0, doNothing, noEvent)
, VALUE("One", 1, doNothing, noEvent)
, VALUE("Two", 2, doNothing, noEvent)
);
int chooseTest = -1;
CHOOSE(chooseTest, chooseMenu, "Choose", doNothing, noEvent, noStyle
, VALUE("First", 1, doNothing, noEvent)
, VALUE("Second", 2, doNothing, noEvent)
, VALUE("Third", 3, doNothing, noEvent)
, VALUE("Last", -1, doNothing, noEvent)
);
//customizing a prompt look!
//by extending the prompt class
class altPrompt: public prompt {
public:
altPrompt(constMEM promptShadow& p): prompt(p) {}
Used printTo(navRoot &root, bool sel, menuOut& out, idx_t idx, idx_t len, idx_t) override {
return out.printRaw(F("special prompt!"), len);
}
};
MENU(subMenu, "Sub-Menu", showEvent, anyEvent, noStyle
, OP("Sub1", showEvent, anyEvent)
, OP("Sub2", showEvent, anyEvent)
, OP("Sub3", showEvent, anyEvent)
, altOP(altPrompt, "", showEvent, anyEvent)
, EXIT("<Back")
);
MENU(mainMenu, "Main menu", doNothing, noEvent, wrapStyle
, OP("Op1", action1, anyEvent)
, OP("Op2", action2, enterEvent)
/* FIELD Parameters :
Action Name(function name), Action Heading, Action Heading Unit,
range_lowest, range_highest, range_increment_step,
range_decrement_step
*/
, FIELD(brightnessValue, "Brightness", "%", 0, 100, 5, 5, adjustBrightness, enterEvent, wrapStyle)
, SUBMENU(subMenu)
, SUBMENU(setLed)
, OP("LED On", internalLedOn, enterEvent) // will turn on built-in LED
, OP("LED Off", internalLedOff, enterEvent)// will turn off built-in LED
, SUBMENU(selMenu)
, SUBMENU(chooseMenu)
, OP("Alert test", doAlert, enterEvent)
, EXIT("<Back")
);
//describing a menu output device without macros
//define at least one panel for menu output
const panel panels[] MEMMODE = {{0, 0, 128 / fontW, 64 / fontH}};
navNode* nodes[sizeof(panels) / sizeof(panel)]; //navNodes to store navigation status
panelsList pList(panels, nodes, 1); //a list of panels and nodes
idx_t tops[MAX_DEPTH] = {0, 0}; //store cursor positions for each level
#ifdef LARGE_FONT
SSD1306AsciiOut outOLED(&oled, tops, pList, 8, 2); //oled output device menu driver
#else
SSD1306AsciiOut outOLED(&oled, tops, pList, 5, 1); //oled output device menu driver
#endif
menuOut* constMEM outputs[] MEMMODE = {&outOLED}; //list of output devices
outputsList out(outputs, 1); //outputs list
#ifdef NAV_BUTTONS_INPUT_PULLUP
//build a map of keys to menu commands
keyMap joystickBtn_map[] = {
{ -BTN_SEL, defaultNavCodes[enterCmd].ch} ,
{ -BTN_UP, defaultNavCodes[upCmd].ch} ,
{ -BTN_DOWN, defaultNavCodes[downCmd].ch} ,
{ -BTN_ESC, defaultNavCodes[escCmd].ch} ,
};
keyIn<TOTAL_NAV_BUTTONS> joystickBtns(joystickBtn_map);//the input driver
#else
//build a map of keys to menu commands
keyMap joystickBtn_map[] = {
{ BTN_SEL, defaultNavCodes[enterCmd].ch} ,
{ BTN_UP, defaultNavCodes[upCmd].ch} ,
{ BTN_DOWN, defaultNavCodes[downCmd].ch} ,
{ BTN_ESC, defaultNavCodes[escCmd].ch},
};
keyIn<TOTAL_NAV_BUTTONS> joystickBtns(joystickBtn_map);//the input driver
#endif
NAVROOT(nav, mainMenu, MAX_DEPTH, joystickBtns, out);
result alert(menuOut& o, idleEvent e) {
if (e == idling) {
o.setCursor(0, 0);
o.print("alert test");
o.setCursor(0, 1);
o.print("press [select]");
o.setCursor(0, 2);
o.print("to continue...");
}
return proceed;
}
result doAlert(eventMask e, prompt &item) {
nav.idleOn(alert);
return proceed;
}
//when menu is suspended
result idle(menuOut &o, idleEvent e) {
o.clear();
switch (e) {
case idleStart: o.println("suspending menu!"); break;
case idling: o.println("suspended..."); break;
case idleEnd: o.println("resuming menu."); break;
}
return proceed;
}
void setup() {
joystickBtns.begin();
pinMode(LED_PIN, OUTPUT);
pinMode(LED_BUILTIN, OUTPUT);
Wire.begin();
oled.begin(&Adafruit128x64, OLED_I2C_ADDRESS); //check config
oled.setFont(menuFont);
oled.clear();
nav.idleTask = idle; //point a function to be used when menu is suspended
}
void loop() {
nav.poll();
delay(1);//simulate a delay when other tasks are done
}
`