How do you set the wall thickness like in the readme image?

[sononicola]

Regarding this image in the readme:

How did you increased the wall thickness?
In my dashboard in looks like this:

Maybe is the unit? How much is 1 meter for your rooms?
I'm using 100 unit == 100 centimeters == 1 meter

[paulodearaujo]

That screenshot uses the normal 8-unit wall stroke. There was no separate wall-thickness setting in v1.2.5: WALL_THICKNESS was fixed at 8.

Easy Floorplan does not assign a physical length to a canvas unit, so using 100 units for one metre is fine. The entire SVG is scaled from the configured canvas size to the card. That means the visible wall width is roughly 8 × rendered plan width / canvas width pixels. The README example uses a 1000 × 600 virtual canvas, which is why the same stroke can look heavier there.

If you just want thicker walls, v1.2.6 added a supported override up to 10. After updating and hard-refreshing Home Assistant, this works with card-mod:

type: custom:easy-floorplan-card
card_mod:
  style: |
    ha-card {
      --fp-skin-wall-width: 10;
    }

Keep it at 10 or below because larger strokes are not fully cleared by the door masks. The new odnetnin skin also uses 10, but changes the rest of the look as well.

[sononicola]

Thank you, now i try that setting!

Probably in addition I will split the garage and the house in two different cards, so it will look better in a vertical phone view.
I could also use floors but i prefer too watch everything in one place.

[nicosandller]

Its also possible to set the wall thickness through the UI when creating a wall now @sononicola !

Hope this is helpful!