GPS Waypoints

GPS Waypoints Overview

nicFW can store up to 99 pre-programmed locations, referred to as Waypoints. Waypoints may be used to:

• Save locations while navigating
• Set navigation target locations
• Spoof GPS coordinates

Waypoint #99 is reserved as the default spoofed location when the radio is powered on with GPS functionality disabled.
See: Main Menu → GPS → Enabled

---

Waypoint Browser

Waypoints can be browsed by executing the Waypoints function while in GPS Mode
(default key: SP-7).

Each waypoint entry displays:

• Waypoint number
• Waypoint name
• Location in degrees/minutes
• Location in decimal degrees
• Maidenhead locator

---

Browser Controls

SP-RED — Exit

Closes the Waypoint Browser and returns to the previous screen.

SP-GREEN — Set to Target

Sets the currently selected waypoint as the active navigation target.

LP-0 — Edit Name

Creates, edits, or changes the name of the selected waypoint.

See:

• Radio → T9 Text Entry

LP-1 — Edit Latitude

Edits the latitude of the selected waypoint.
Input is in decimal degrees format.

Controls during entry:

• * — Enter a decimal point
• GREEN or # — Confirm entry
• RED — Cancel entry

LP-2 — Edit Longitude

Edits the longitude of the selected waypoint.
Operation is identical to Edit Latitude, but applies to longitude.

LP-4 — Invert Latitude

Flips the latitude sign between positive and negative
(North ↔ South).

LP-5 — Invert Longitude

Flips the longitude sign between positive and negative
(East ↔ West).

LP-RED — Spoof GPS

Sets the selected waypoint as the spoofed GPS location.
Main Menu → GPS → Enabled must be set to Off for this function to operate.

The spoofed location will remain set until:

• GPS is re-enabled
• Another location is spoofed
• The radio is powered off.