v0.7.8

Flash it

Download prusa-touch-full.bin and flash over USB-C:

esptool.py --chip esp32s3 -p <PORT> -b 460800 write_flash 0x0 prusa-touch-full.bin

See the README
for details. Back up the stock firmware first.

Full Changelog: v0.7.7...v0.7.8

v0.7.7

Flash it

Download prusa-touch-full.bin and flash over USB-C:

esptool.py --chip esp32s3 -p <PORT> -b 460800 write_flash 0x0 prusa-touch-full.bin

See the README
for details. Back up the stock firmware first.

Full Changelog: v0.7.6...v0.7.7

v0.7.6

Flash it

Download prusa-touch-full.bin and flash over USB-C:

esptool.py --chip esp32s3 -p <PORT> -b 460800 write_flash 0x0 prusa-touch-full.bin

See the README
for details. Back up the stock firmware first.

Full Changelog: v0.7.5...v0.7.6

v0.7.5

Flash it

Download prusa-touch-full.bin and flash over USB-C:

esptool.py --chip esp32s3 -p <PORT> -b 460800 write_flash 0x0 prusa-touch-full.bin

See the README
for details. Back up the stock firmware first.

Full Changelog: v0.7.0...v0.7.5

v0.7.0

Flash it

Download prusa-touch-full.bin and flash over USB-C:

esptool.py --chip esp32s3 -p <PORT> -b 460800 write_flash 0x0 prusa-touch-full.bin

See the README
for details. Back up the stock firmware first.

Full Changelog: v0.6.8...v0.7.0

v0.6.8

Flash it

Download prusa-touch-full.bin and flash over USB-C:

esptool.py --chip esp32s3 -p <PORT> -b 460800 write_flash 0x0 prusa-touch-full.bin

See the README
for details. Back up the stock firmware first.

Full Changelog: v0.6.7...v0.6.8

v0.6.7

Flash it

Download prusa-touch-full.bin and flash over USB-C:

esptool.py --chip esp32s3 -p <PORT> -b 460800 write_flash 0x0 prusa-touch-full.bin

See the README
for details. Back up the stock firmware first.

Full Changelog: v0.6.6...v0.6.7

v0.6.6

Flash it

Download prusa-touch-full.bin and flash over USB-C:

esptool.py --chip esp32s3 -p <PORT> -b 460800 write_flash 0x0 prusa-touch-full.bin

See the README
for details. Back up the stock firmware first.

Full Changelog: v0.6.5...v0.6.6

v0.6.5

Flash it

Download prusa-touch-full.bin and flash over USB-C:

esptool.py --chip esp32s3 -p <PORT> -b 460800 write_flash 0x0 prusa-touch-full.bin

See the README
for details. Back up the stock firmware first.

Full Changelog: v0.6.4...v0.6.5

v0.6.4

Flash it

Download prusa-touch-full.bin and flash over USB-C:

esptool.py --chip esp32s3 -p <PORT> -b 460800 write_flash 0x0 prusa-touch-full.bin

See the README
for details. Back up the stock firmware first.

Full Changelog: v0.6.3...v0.6.4