Releases: noodlemctwoodle/unraid-ugreen-idx6011-pro
Release list
2026.07.15.beta.6 (beta)
Beta / pre-release. Testing build cut from the
developbranch - expect rough edges. For a stable install use the latest release.
Install / update the beta
In the Unraid web UI: Plugins -> Install Plugin, paste this URL and install:
https://raw.githubusercontent.com/noodlemctwoodle/unraid-ugreen-idx6011-pro/develop/ugreen-idx6011-pro.beta.plg
Then reboot. The beta self-updates from develop; each new beta run bumps the version. To move back to the stable channel, install the stable .plg.
What's in this beta (targeting 2026.07.15)
- Nine more cards for your pages: Disk I/O (live read/write), Load average, Shares,
Pools (cache), Unassigned devices, UPS (apcupsd battery/runtime), Parity / array
operation (check/sync/rebuild progress, disabled-disk warning, sync errors) and
Unraid licence; interface cards now show the link speed (1G / 2.5G / ...). The
Add-module list is grouped by area (System, Compute, Power, Network, Storage,
Docker and Layout) so it stays easy to navigate. Every card shows a tidy idle
line when its data source isn't present. - New Transfer card: add it to any page to watch a Dynamix File Manager copy or
move in progress - the operation, destination folder, overall progress %, live
rate and ETA. It reads Unraid's built-in file manager, so no setup is needed;
when nothing is copying the card shows an idle line. - Disk bay LEDs now light on every populated bay, however the SATA controllers
enumerate. The LED daemon discovers each controller at runtime instead of
assuming a fixed PCI address, so a drive in any bay shows its health even after
a BIOS or PCIe re-enumeration moves a controller (previously up to four bays
could stay dark). A stale bay calibration can no longer override this. - The on-screen Storage card now reports the whole array (matching the Unraid
Main page) instead of the cache pool. - The Unraid Plugins page now shows a description for the plugin.
- Clarified in the docs where to disable the BIOS Watchdog Timer (the Advanced
tab in BIOS setup, not Ctrl+F1).
Payload: ugreen-idx6011-pro-2026.07.15.beta.6.txz | SHA256: 998bc93cc60ecb8da542f6ee8260e3f64b9ff6fb92ff8cc08c18e01006a4022c
2026.07.15.beta.5 (beta)
Beta / pre-release. Testing build cut from the
developbranch - expect rough edges. For a stable install use the latest release.
Install / update the beta
In the Unraid web UI: Plugins -> Install Plugin, paste this URL and install:
https://raw.githubusercontent.com/noodlemctwoodle/unraid-ugreen-idx6011-pro/develop/ugreen-idx6011-pro.beta.plg
Then reboot. The beta self-updates from develop; each new beta run bumps the version. To move back to the stable channel, install the stable .plg.
What's in this beta (targeting 2026.07.15)
- Nine more cards for your pages: Disk I/O (live read/write), Load average, Shares,
Pools (cache), Unassigned devices, UPS (apcupsd battery/runtime), Parity / array
operation (check/sync/rebuild progress, disabled-disk warning, sync errors) and
Unraid licence; interface cards now show the link speed (1G / 2.5G / ...). The
Add-module list is grouped by area (System, Compute, Power, Network, Storage,
Docker and Layout) so it stays easy to navigate. Every card shows a tidy idle
line when its data source isn't present. - New Transfer card: add it to any page to watch a Dynamix File Manager copy or
move in progress - the operation, destination folder, overall progress %, live
rate and ETA. It reads Unraid's built-in file manager, so no setup is needed;
when nothing is copying the card shows an idle line. - Disk bay LEDs now light on every populated bay, however the SATA controllers
enumerate. The LED daemon discovers each controller at runtime instead of
assuming a fixed PCI address, so a drive in any bay shows its health even after
a BIOS or PCIe re-enumeration moves a controller (previously up to four bays
could stay dark). A stale bay calibration can no longer override this. - The on-screen Storage card now reports the whole array (matching the Unraid
Main page) instead of the cache pool. - The Unraid Plugins page now shows a description for the plugin.
- Clarified in the docs where to disable the BIOS Watchdog Timer (the Advanced
tab in BIOS setup, not Ctrl+F1).
Payload: ugreen-idx6011-pro-2026.07.15.beta.5.txz | SHA256: c16c6e405d6bcaa79598bb497e696688466f72572a504ee93ae085d3b2092e25
2026.07.15.beta.4 (beta)
Beta / pre-release. Testing build cut from the
developbranch - expect rough edges. For a stable install use the latest release.
Install / update the beta
In the Unraid web UI: Plugins -> Install Plugin, paste this URL and install:
https://raw.githubusercontent.com/noodlemctwoodle/unraid-ugreen-idx6011-pro/develop/ugreen-idx6011-pro.beta.plg
Then reboot. The beta self-updates from develop; each new beta run bumps the version. To move back to the stable channel, install the stable .plg.
What's in this beta (targeting 2026.07.15)
- Nine more cards for your pages: Disk I/O (live read/write), Load average, Shares,
Pools (cache), Unassigned devices, UPS (apcupsd battery/runtime), Parity / array
operation (check/sync/rebuild progress, disabled-disk warning, sync errors) and
Unraid licence; interface cards now show the link speed (1G / 2.5G / ...). The
Add-module list is grouped by area (System, Compute, Power, Network, Storage,
Docker and Layout) so it stays easy to navigate. Every card shows a tidy idle
line when its data source isn't present. - New Transfer card: add it to any page to watch a Dynamix File Manager copy or
move in progress - the operation, destination folder, overall progress %, live
rate and ETA. It reads Unraid's built-in file manager, so no setup is needed;
when nothing is copying the card shows an idle line. - Disk bay LEDs now light on every populated bay, however the SATA controllers
enumerate. The LED daemon discovers each controller at runtime instead of
assuming a fixed PCI address, so a drive in any bay shows its health even after
a BIOS or PCIe re-enumeration moves a controller (previously up to four bays
could stay dark). A stale bay calibration can no longer override this. - The on-screen Storage card now reports the whole array (matching the Unraid
Main page) instead of the cache pool. - The Unraid Plugins page now shows a description for the plugin.
- Clarified in the docs where to disable the BIOS Watchdog Timer (the Advanced
tab in BIOS setup, not Ctrl+F1).
Payload: ugreen-idx6011-pro-2026.07.15.beta.4.txz | SHA256: 2bb100e6348c8d860dad36837ba1d43a9c546fa2dc2b6d23dccd530708cff131
2026.07.15.beta.3 (beta)
Beta / pre-release. Testing build cut from the
developbranch - expect rough edges. For a stable install use the latest release.
Install / update the beta
In the Unraid web UI: Plugins -> Install Plugin, paste this URL and install:
https://raw.githubusercontent.com/noodlemctwoodle/unraid-ugreen-idx6011-pro/develop/ugreen-idx6011-pro.beta.plg
Then reboot. The beta self-updates from develop; each new beta run bumps the version. To move back to the stable channel, install the stable .plg.
What's in this beta (targeting 2026.07.15)
- Nine more cards for your pages: Disk I/O (live read/write), Load average, Shares,
Pools (cache), Unassigned devices, UPS (apcupsd battery/runtime), Parity / array
operation (check/sync/rebuild progress, disabled-disk warning, sync errors) and
Unraid licence; interface cards now show the link speed (1G / 2.5G / ...). The
Add-module list is grouped (System / Compute / Power & cooling / Network /
Storage / Docker & VMs / Layout) so it stays easy to navigate. Every card shows
a tidy idle line when its data source isn't present. - New Transfer card: add it to any page to watch a Dynamix File Manager copy or
move in progress - the operation, destination folder, overall progress %, live
rate and ETA. It reads Unraid's built-in file manager, so no setup is needed;
when nothing is copying the card shows an idle line. - Disk bay LEDs now light on every populated bay, however the SATA controllers
enumerate. The LED daemon discovers each controller at runtime instead of
assuming a fixed PCI address, so a drive in any bay shows its health even after
a BIOS or PCIe re-enumeration moves a controller (previously up to four bays
could stay dark). A stale bay calibration can no longer override this. - The on-screen Storage card now reports the whole array (matching the Unraid
Main page) instead of the cache pool. - The Unraid Plugins page now shows a description for the plugin.
- Clarified in the docs where to disable the BIOS Watchdog Timer (the Advanced
tab in BIOS setup, not Ctrl+F1).
Payload: ugreen-idx6011-pro-2026.07.15.beta.3.txz | SHA256: afe5b5de83363c6106b94b51b53cec110e9dbafd08697292c99c6fd5692c1e51
2026.07.15.beta.2 (beta)
Beta / pre-release. Testing build cut from the
developbranch - expect rough edges. For a stable install use the latest release.
Install / update the beta
In the Unraid web UI: Plugins -> Install Plugin, paste this URL and install:
https://raw.githubusercontent.com/noodlemctwoodle/unraid-ugreen-idx6011-pro/develop/ugreen-idx6011-pro.beta.plg
Then reboot. The beta self-updates from develop; each new beta run bumps the version. To move back to the stable channel, install the stable .plg.
What's in this beta (targeting 2026.07.15)
- New Transfer card: add it to any page to watch a Dynamix File Manager copy or
move in progress - the operation, destination folder, overall progress %, live
rate and ETA. It reads Unraid's built-in file manager, so no setup is needed;
when nothing is copying the card shows an idle line. - Disk bay LEDs now light on every populated bay, however the SATA controllers
enumerate. The LED daemon discovers each controller at runtime instead of
assuming a fixed PCI address, so a drive in any bay shows its health even after
a BIOS or PCIe re-enumeration moves a controller (previously up to four bays
could stay dark). A stale bay calibration can no longer override this. - The on-screen Storage card now reports the whole array (matching the Unraid
Main page) instead of the cache pool. - The Unraid Plugins page now shows a description for the plugin.
- Clarified in the docs where to disable the BIOS Watchdog Timer (the Advanced
tab in BIOS setup, not Ctrl+F1).
Payload: ugreen-idx6011-pro-2026.07.15.beta.2.txz | SHA256: 182e66f10503504f83d047333d9e0b99aad045199a24f8eff0192a9bba942510
2026.07.15.beta.11 (beta)
Beta / pre-release. Testing build cut from the
developbranch - expect rough edges. For a stable install use the latest release.
Install / update the beta
In the Unraid web UI: Plugins -> Install Plugin, paste this URL and install:
https://raw.githubusercontent.com/noodlemctwoodle/unraid-ugreen-idx6011-pro/develop/ugreen-idx6011-pro.beta.plg
Then reboot. The beta self-updates from develop; each new beta run bumps the version. To move back to the stable channel, install the stable .plg.
What's in this beta (targeting 2026.07.15)
- Nine more cards for your pages: Disk I/O (live read/write), Load average, Shares,
Pools (cache), Unassigned devices, UPS (apcupsd battery/runtime), Parity / array
operation (check/sync/rebuild progress, disabled-disk warning, sync errors) and
Unraid licence; interface cards now show the link speed (1G / 2.5G / ...). The
Add-module list is grouped by area (System, Compute, Power, Network, Storage,
Docker and Layout) so it stays easy to navigate. Every card shows a tidy idle
line when its data source isn't present. - Three more cards: CPU cores (per-core load as a grid or a bar strip, with the
average load and clock), Temperatures (CPU, board and every NVMe sensor, each
colour-coded) and Boot flash (USB usage). The disk cards also gain a SMART line
showing drive age, SSD/NVMe life remaining and any reallocated or pending
sectors, read from the health data Unraid already caches (no disk wake-ups). - New Transfer card: add it to any page to watch a Dynamix File Manager copy or
move in progress - the operation, destination folder, overall progress %, live
rate and ETA. It reads Unraid's built-in file manager, so no setup is needed;
when nothing is copying the card shows an idle line. - Disk bay LEDs now light on every populated bay, however the SATA controllers
enumerate. The LED daemon discovers each controller at runtime instead of
assuming a fixed PCI address, so a drive in any bay shows its health even after
a BIOS or PCIe re-enumeration moves a controller (previously up to four bays
could stay dark). A stale bay calibration can no longer override this. - The on-screen Storage card now reports the whole array (matching the Unraid
Main page) instead of the cache pool. - The Unraid Plugins page now shows a description for the plugin.
- Clarified in the docs where to disable the BIOS Watchdog Timer (the Advanced
tab in BIOS setup, not Ctrl+F1).
Payload: ugreen-idx6011-pro-2026.07.15.beta.11.txz | SHA256: e2c95c2e5050567c359ce9ae37d7705870d044d3d0b943429b084adade369775
2026.07.15.beta.10 (beta)
Beta / pre-release. Testing build cut from the
developbranch - expect rough edges. For a stable install use the latest release.
Install / update the beta
In the Unraid web UI: Plugins -> Install Plugin, paste this URL and install:
https://raw.githubusercontent.com/noodlemctwoodle/unraid-ugreen-idx6011-pro/develop/ugreen-idx6011-pro.beta.plg
Then reboot. The beta self-updates from develop; each new beta run bumps the version. To move back to the stable channel, install the stable .plg.
What's in this beta (targeting 2026.07.15)
- Nine more cards for your pages: Disk I/O (live read/write), Load average, Shares,
Pools (cache), Unassigned devices, UPS (apcupsd battery/runtime), Parity / array
operation (check/sync/rebuild progress, disabled-disk warning, sync errors) and
Unraid licence; interface cards now show the link speed (1G / 2.5G / ...). The
Add-module list is grouped by area (System, Compute, Power, Network, Storage,
Docker and Layout) so it stays easy to navigate. Every card shows a tidy idle
line when its data source isn't present. - Three more cards: CPU cores (per-core load as a grid or a bar strip, with the
average load and clock), Temperatures (CPU, board and every NVMe sensor, each
colour-coded) and Boot flash (USB usage). The disk cards also gain a SMART line
showing drive age, SSD/NVMe life remaining and any reallocated or pending
sectors, read from the health data Unraid already caches (no disk wake-ups). - New Transfer card: add it to any page to watch a Dynamix File Manager copy or
move in progress - the operation, destination folder, overall progress %, live
rate and ETA. It reads Unraid's built-in file manager, so no setup is needed;
when nothing is copying the card shows an idle line. - Disk bay LEDs now light on every populated bay, however the SATA controllers
enumerate. The LED daemon discovers each controller at runtime instead of
assuming a fixed PCI address, so a drive in any bay shows its health even after
a BIOS or PCIe re-enumeration moves a controller (previously up to four bays
could stay dark). A stale bay calibration can no longer override this. - The on-screen Storage card now reports the whole array (matching the Unraid
Main page) instead of the cache pool. - The Unraid Plugins page now shows a description for the plugin.
- Clarified in the docs where to disable the BIOS Watchdog Timer (the Advanced
tab in BIOS setup, not Ctrl+F1).
Payload: ugreen-idx6011-pro-2026.07.15.beta.10.txz | SHA256: b118955365b9d309bfc53b45844a9a2a4361758334cad08867600b9a6115f1d9
2026.07.15.beta.1 (beta)
Beta / pre-release. Testing build cut from the
developbranch - expect rough edges. For a stable install use the latest release.
Install / update the beta
In the Unraid web UI: Plugins -> Install Plugin, paste this URL and install:
https://raw.githubusercontent.com/noodlemctwoodle/unraid-ugreen-idx6011-pro/develop/ugreen-idx6011-pro.beta.plg
Then reboot. The beta self-updates from develop; each new beta run bumps the version. To move back to the stable channel, install the stable .plg.
What's in this beta (targeting 2026.07.15)
- Disk bay LEDs now light on every populated bay, however the SATA controllers
enumerate. The LED daemon discovers each controller at runtime instead of
assuming a fixed PCI address, so a drive in any bay shows its health even after
a BIOS or PCIe re-enumeration moves a controller (previously up to four bays
could stay dark). A stale bay calibration can no longer override this. - The on-screen Storage card now reports the whole array (matching the Unraid
Main page) instead of the cache pool. - The Unraid Plugins page now shows a description for the plugin.
- Clarified in the docs where to disable the BIOS Watchdog Timer (the Advanced
tab in BIOS setup, not Ctrl+F1).
Payload: ugreen-idx6011-pro-2026.07.15.beta.1.txz | SHA256: 651f80c753462d83f9882c8c44cc4b49ad010f8315b413a77ad23626e0d96475
2026.07.13
Touch LCD dashboard + smart front-panel LEDs for the UGREEN NASync iDX6011 Pro running Unraid - the full front panel, working natively, no UGOS required.
Install / update
In the Unraid web UI: Plugins -> Install Plugin, paste this URL and install:
https://raw.githubusercontent.com/noodlemctwoodle/unraid-ugreen-idx6011-pro/main/ugreen-idx6011-pro.plg
Then reboot. The plugin downloads a SHA256-verified payload, stages everything, and registers its own EFI boot entry; the 258x960 touch panel lights once the box boots that entry.
If the panel stays dark after rebooting, make the entry first in the BIOS: Boot > UEFI USB Hard Disk Drive BBS Priorities > Unraid (iDX6011 panel).
Kernel-matched: the bundled touch modules + display overlay are built for kernel 6.18.38-Unraid (Unraid 7.3.2). On a different Unraid kernel the panel stays dark until you rebuild them with
boot/build-overlay.sh(see the runbook).
What's changed in 2026.07.13
- Fully customisable dashboard. Build any page from a library of modules and pick
each one's look: bar, ring, gauge, history graph, area, segmented blocks,
used/free split, trend, or big number. New modules - Array status, Updates
(Unraid OS + plugins), Power draw, NPU, Fans, Host, VMs, and per-item Disk /
Interface / Container / VM cards. The Docker cards show each container's IP and
flag when an image update is available. - Web Layout editor with a live preview. Add, rename, reorder, delete and
show/hide pages; for each module choose its visualisation (and, for per-item
cards, which disk/interface/container/VM), with a live render of the real
258x960 panel beside you. - Fan control from the panel. Drive all four chassis fans on Auto / Silent /
Quiet / Turbo temperature curves (CPU fans follow the CPU, case fans the hottest
disk) or Max. A floor keeps every fan spinning and a critical temperature forces
100%. Live fan RPM on a Fans card, including an animated spinning-fan view. - Theme your dashboard. Choose the font, heading and text sizes, and every palette
colour with live colour pickers - now including card-title and dim-text colours
plus a card-opacity slider. Point at a wallpaper and a header logo from any image
on the server via a file browser; both hot-swap on the panel live, with no restart.
Pick network-rate units (bits or bytes) and the primary network interface. Cards
grow with the text size instead of overlapping. - Wallpapers and full-screen pages. Make cards translucent so a wallpaper shows
through (globally or per page), add Spacer modules to push content down, and hide
any page's header bar / title card / page dots for a clean full-screen image page.
A text drop shadow, a themeable card-title colour and a wallpaper-dim scrim keep
everything readable over even busy images. - Theme presets and sharing. Built-in presets (Unraid, Sakura, Ember, Abyss, Aurora,
Grape, Cyber, Mono) recolour the dashboard in a click; Save current writes a theme
file to panel/themes/, and a Load-a-theme dropdown lists your saved themes - share
one by copying its .cfg. - Power-save schedule. Turn the screen and disk/LAN LEDs off between two local times
(quiet hours). A tap wakes everything and it re-sleeps 30s after the last touch; the
timezone comes from Unraid automatically, and the power LED stays on. - Smarter front LEDs. Configurable LAN and per-state disk-light colours, power
light on/off, and an activity mode that blinks the disk/LAN LEDs on I/O and goes
solid when idle. - Redesigned settings. Screen, Lighting and Display (theme + layout) tabs now
share one consistent look; everything is also editable live from the panel's own
touch Settings page.
Payload: ugreen-idx6011-pro-2026.07.13.txz | SHA256: deb16a6f94d3e3a6dd01d347a4e5dacaa72d9880ff1b4323d5c05c1535755764
Docs & source: https://github.com/noodlemctwoodle/unraid-ugreen-idx6011-pro#readme
2026.07.12.1
Touch LCD dashboard + smart front-panel LEDs for the UGREEN NASync iDX6011 Pro running Unraid - the full front panel, working natively, no UGOS required.
Install / update
In the Unraid web UI: Plugins -> Install Plugin, paste this URL and install:
https://raw.githubusercontent.com/noodlemctwoodle/unraid-ugreen-idx6011-pro/main/ugreen-idx6011-pro.plg
Then reboot. The plugin downloads a SHA256-verified payload, stages everything, and registers its own EFI boot entry; the 258x960 touch panel lights once the box boots that entry.
If the panel stays dark after rebooting, make the entry first in the BIOS: Boot > UEFI USB Hard Disk Drive BBS Priorities > Unraid (iDX6011 panel).
Kernel-matched: the bundled touch modules + display overlay are built for kernel 6.18.38-Unraid (Unraid 7.3.2). On a different Unraid kernel the panel stays dark until you rebuild them with
boot/build-overlay.sh(see the runbook).
What's changed in 2026.07.12.1
- New plugin icon: original line-art of the UGREEN iDX6011 Pro by Deivizzz.
Payload: ugreen-idx6011-pro-2026.07.12.1.txz | SHA256: 924db28d8e5b1361e64fbb45d776ceaabc045d347703c765ea813de1ec022978
Docs & source: https://github.com/noodlemctwoodle/unraid-ugreen-idx6011-pro#readme