v0.1.1 — unstable, for testing

Warning

Unstable. For testing only. Expect bugs, freezes and crashes. Do not put
this on a deck you are relying on — not the night of a gig, not on a club's
unit, and not on the only player you own.

Fixes for everything reported against 0.1.0.

Documentation · Getting started

Install

Copy CDJ3Kv011_mods.UPD to a USB stick formatted FAT32 or exFAT, make sure it
is the only .UPD on there, and run the deck's normal firmware-update
procedure from the top USB port. The deck restarts itself twice. Installing
over 0.1.0 works the same way.

Remove

Power off, hold CUE/LOOP CALL ◀ and TEMPO ±6/±10/±16/WIDE, and power on
holding them. The deck comes up in service mode and the mods come off as it
starts. uninstall/CDJ3Kv000_remove.UPD does the same from a stick.

Requires

A CDJ-3000 on firmware 3.13 to 3.22, either hardware variant.

Fixed

Gate cue

• A hot cue pressed while the deck is playing is a normal hot cue again. Pads
  only gate when the deck was paused at the press. (#2)
• The GATE CUE shortcut on the play screen is a filled plate in both states,
  grey when off, so it reads as the control it is and no longer as an
  indicator, with even spacing to the timer and the tempo. (#7)

Browse

• The EDIT toggle appears in the browse header on every stick, not only on
  those whose category rail happens to have nine entries. (#3)

Stems

• A 32-bit float WAV gets its own stems instead of inheriting the previous
  track's. (#4)
• VBR MP3s are sized correctly and get stems; the length probe no longer
  fails. (#5)
• Loading a cached pair off the stick no longer shows the warning badge.
  A pair too large for the deck's free memory is retried instead of loaded,
  which is what took a 9-minute track down. A stick prepared with one
  separation model plays on a deck using another. (#6)
• The stem job starts when a track is loaded paused, not only once it plays:
  with AUTO CUE off, switching tracks on a paused deck no longer waits.
• The progress bar counts each stage on its own and no longer jumps or steps
  back between separating, downloading and loading. Reconstructing and writing
  are not counted by the server and hold at 80 and 81 until the next stage.
• The STEM SERVER ADDRESS row in MOD SETTINGS is reachable: the list was one
  row short when every mod was on and the location set to MANUAL.
• The LAN notice and the documentation link in the STEMS rows are correct.

Thanks

Reports from @loyahdev (#2), @0x606a (#3) and @kylel1213 (#4, #5, #6),
and the GATE CUE plate design from @lbarnette (#7).

Samples for X-PAD are a separate download: see the extras-files release.

Checksums

ff254f88ba7884a6b59b3224cf03449fc9ddefebb35e99cb9b49b5f426c5ecc9  CDJ3Kv011_mods.UPD
aec76b9027782db83fa53560b873b1cae489840a13f3d146c9712c6ff8d1b7c6  uninstall/CDJ3Kv000_remove.UPD

v0.1.0 — unstable, for testing

Warning

Unstable. For testing only. Expect bugs, freezes and crashes. Do not put
this on a deck you are relying on — not the night of a gig, not on a club's
unit, and not on the only player you own.

The first public build. Documentation ·
Getting started

Install

Copy CDJ3Kv010_mods.UPD to a USB stick formatted FAT32 or exFAT, make sure it
is the only .UPD on there, and run the deck's normal firmware-update
procedure from the top USB port. The deck restarts itself twice.

Remove

Power off, hold CUE/LOOP CALL ◀ and TEMPO ±6/±10/±16/WIDE, and power on
holding them. The deck comes up in service mode and the mods come off as it
starts. uninstall/CDJ3Kv000_remove.UPD does the same from a stick.

Requires

A CDJ-3000 on firmware 3.13 to 3.22, either hardware variant.

What is in it

Cue improvements, stems over the network, the X-PAD sampler, grid BPM adjust,
six themes, and playlist reordering.

Samples for X-PAD are a separate download: see the
extras-files
release.

Checksums

e8f62ab8d71dfa4388d8b4a14d50eb0c358fdf851971e5d1094ccf196cbde999  CDJ3Kv010_mods.UPD
4346d425463c355e6326f3369377d58a2bfb2a18487a1f4595e05a17544dae2b  uninstall/CDJ3Kv000_remove.UPD

Samples and loops for your stick

Files that go on the USB stick you play from, for the features that read more
than your library from it. Unzip and copy the mods folder to the root of the
stick.

These do not change between mods releases.

X-PAD samples — cdj3k-mods-starter.zip

Eight drum one-shots on the hot cue pads: pads A–D a 909 kit, E–H an 808 kit.
extras/ holds a full 707 kit, a 606 kit and a few more 909 sounds to swap in.
No configuration file — X-PAD takes the first eight files in mods/loops/, in
name order. See readme.txt inside.

Documentation