Skip to content

Multiprotocol v1.3.1.69

Choose a tag to compare

@pascallanger pascallanger released this 23 Sep 21:47

Change Log since v1.3.1.65

  • OMP
    • Corrected a bug in the telemetry (CRC was not activated):
      • A1 = battery voltage including "recovered" battery voltage from corrupted telemetry packets
      • A2 = battery voltage from only good packets
      • You must adjust the battery voltage offset with a voltmeter since there are some large differences between the models
      • RX_RSSI = TQly = percentage of received telemetry packets (good and corrupted) received from the model which has nothing to do with how well the RX is receiving the TX
      • Telemetry is using the NRF24L01 RF component @250K so depending on your module it might not work so well
    • Doc updated
  • AFHDS2A
    • Changed telemetry timing, not sure if it does anything...
  • RadioLink
    • Full ID support => need to rebind all RXs

Flashing these firmwares require Flash Multi v0.6.1 or newer, check the Firmware updates manual and troubleshooting section if you have issues.