Skip to content

Releases

PlasmaZones v3.5.5 (package revision 3)

Choose a tag to compare

@github-actions github-actions released this 18 Nov 18:18
Immutable release. Only release title and notes can be modified.

PlasmaZones v3.5.5

This is package revision 3 of 3.5.5. The source is unchanged. The packages were rebuilt because a distribution moved to a KWin the previous packages were not compiled against, and the KWin effect only loads against the exact version it was built for. Install it as you would any update and the overlay comes back. The notes below are those of 3.5.5.

Added

  • Adjustable editor background: the layout editor's background no longer has to cover the desktop at a fixed 70%. A button in the editor's bottom bar opens a slider for it, and another slider under Settings → Editor → Appearance does the same. Either one sets how much of the desktop and its windows show through behind the zones, down to fully clear. (#1161)

Changed

  • Luau and valijson are fetched at build time: the source no longer carries copies of Luau and valijson. The first configure downloads both as archives pinned by version and SHA-256 in cmake/PhosphorDependencies.cmake, and an offline build passes -DPHOSPHOR_DEPS_ARCHIVES=<dir> naming a directory that holds them. Every packaging recipe in the repository already supplies them, and a build against the system Luau or valijson works as before. Luau moves from 0.737 to 0.745. (#1190)

Fixed

  • Editor settings changed in the Settings app reach an open editor: snapping, shortcuts and fill on drop changed on the Editor page while the layout editor was open did not reach it until it was restarted, and a later change made in the editor could write the old values back. The editor now picks them up once they are saved, and it only ever writes the settings changed in the editor itself. (#1161)
  • The Settings app no longer undoes a change made elsewhere: with unsaved changes open in the Settings app, a setting changed meanwhile by the layout editor was put back to its old value when the app saved. The app now takes in the outside change and keeps its own unsaved changes on top. (#1172)
  • A config file with a typo is no longer overwritten while PlasmaZones runs: if config.json was edited by hand and could not be read, the next save from a running PlasmaZones replaced it, which lost every setting in it. A running PlasmaZones now refuses to save over an unreadable file and keeps the settings it last read, and the Settings app says which file to repair. The layout editor and the Settings app no longer move a broken file aside when they start. The PlasmaZones service still does at its own start, renaming it to config.json.corrupt.bak, and that includes a start triggered by opening one of them. (#1172)
  • Equalize Column Widths works after you resize a column by hand: dragging a scrolling column wider pushes its neighbour part way off the screen, and Equalize Column Widths then did nothing, because it only shared the screen between columns that were wholly on it. It now counts every column that reaches onto the screen, clipped ones included, and brings the clipped ones fully into view. A press also lines the columns back up with the screen's edges when their widths already match but a small scroll or a centering setting left one cut off. A width shortcut on the focused column, such as Maximize Column or Increase Column Width, now keeps that column in view after an equalize or a scroll by hand instead of leaving it partly off screen. (#1195)
  • A tiled window you maximize stays maximized with borderless maximized windows on: with KWin's "Borderless maximized windows" setting on, maximizing a tiled window took its title bar off. PlasmaZones read that as a change in the window's minimum size and tiled it again, so the window dropped straight back to its tile. A maximize you ask for now holds. (#1182, #1192)
  • Placement conditions are listed under Placement: the rule editor's condition picker grouped Floating, Snapped, Tiled and Zone under a Tiling heading, even though Snapped and Zone belong to snapping, so the Zone condition was easy to miss. The heading now reads Placement. (#1194)
  • Tiling algorithm settings open on a value they can show: an algorithm's on/off or choice setting whose declared default was not a real true or false, or not one of its own choices, opened in Settings as a switch that read as on whatever it said, or as a list with nothing picked. Such a default now falls back to off, or to the first choice. (#1191)
  • A tiling algorithm with a reserved id no longer counts as loaded: a user algorithm that declared an id PlasmaZones keeps for itself, such as none, was refused but still counted toward the script limit, and deleting its file later announced a change to every open view. It is now skipped like any other refused script. (#1191)

Installation

Arch Linux (AUR):

yay -S plasmazones  # or plasmazones-bin

Arch Linux (manual):

sudo pacman -U plasmazones-3.5.5-*-x86_64.pkg.tar.zst

Debian testing/unstable (apt repository):
Tracks KDE as it lands in Debian and rebuilds when KWin moves.

sudo curl -fsSL https://download.opensuse.org/repositories/home:fuddlesworth/Debian_Unstable/Release.key -o /etc/apt/keyrings/plasmazones.asc
echo 'deb [signed-by=/etc/apt/keyrings/plasmazones.asc] https://download.opensuse.org/repositories/home:/fuddlesworth/Debian_Unstable/ /' | sudo tee /etc/apt/sources.list.d/plasmazones.list
sudo apt update
sudo apt install plasmazones

On Debian testing, swap Debian_Unstable for Debian_Testing in both lines. Packages are built for x86_64 only.

Debian (manual .deb):
Built on Debian unstable. Prefer the apt repository above, which rebuilds when KWin moves.

sudo dpkg -i plasmazones_3.5.5-*_amd64.deb
sudo apt-get install -f  # Install dependencies if needed

Fedora (COPR):

sudo dnf copr enable fuddlesworth/PlasmaZones
sudo dnf install plasmazones

Fedora (manual RPM):

# Fedora 44
sudo dnf install plasmazones-3.5.5-*.fc44.x86_64.rpm
# Fedora 45
sudo dnf install plasmazones-3.5.5-*.fc45.x86_64.rpm

openSUSE Tumbleweed (OBS):

sudo zypper addrepo https://download.opensuse.org/repositories/home:fuddlesworth/openSUSE_Tumbleweed/home:fuddlesworth.repo
sudo zypper refresh
sudo zypper install plasmazones

Fedora Atomic (Kinoite):
Layer the COPR package. Replace 44 with your Fedora release.

sudo curl -fsSL -o /etc/yum.repos.d/plasmazones.repo https://copr.fedorainfracloud.org/coprs/fuddlesworth/PlasmaZones/repo/fedora-44/fuddlesworth-PlasmaZones-fedora-44.repo
rpm-ostree install plasmazones
systemctl reboot

Arch-based tarball (no root):
Built on Arch Linux, so it only runs where KWin is exactly the version Arch shipped at release time and Qt is the same or newer. It does not work on Fedora, Debian or SteamOS. The installer checks both versions and stops before copying anything if they do not match.

tar xzf plasmazones-3.5.5-linux-x86_64.tar.gz
cd plasmazones-linux-x86_64
./install.sh

NixOS (flake):

# flake.nix inputs
plasmazones.url = "github:phosphor-works/PlasmaZones";

# configuration.nix
programs.plasmazones.enable = true;

NixOS (without flakes):
Build this tag's source against your host's pkgs (no release asset needed):

# configuration.nix
environment.systemPackages = [
  (pkgs.callPackage
    "${builtins.fetchTarball "https://github.com/phosphor-works/PlasmaZones/archive/v3.5.5.tar.gz"}/packaging/nix/package.nix"
    { version = "3.5.5"; })
];

Post-Installation

systemctl --user enable --now plasmazones.service
systemsettings kcm_plasmazones

PlasmaZones v3.5.5 (package revision 2)

Choose a tag to compare

@github-actions github-actions released this 16 Nov 16:08
Immutable release. Only release title and notes can be modified.

PlasmaZones v3.5.5

This is package revision 2 of 3.5.5. The source is unchanged. The packages were rebuilt because a distribution moved to a KWin the previous packages were not compiled against, and the KWin effect only loads against the exact version it was built for. Install it as you would any update and the overlay comes back. The notes below are those of 3.5.5.

Added

  • Adjustable editor background: the layout editor's background no longer has to cover the desktop at a fixed 70%. A button in the editor's bottom bar opens a slider for it, and another slider under Settings → Editor → Appearance does the same. Either one sets how much of the desktop and its windows show through behind the zones, down to fully clear. (#1161)

Changed

  • Luau and valijson are fetched at build time: the source no longer carries copies of Luau and valijson. The first configure downloads both as archives pinned by version and SHA-256 in cmake/PhosphorDependencies.cmake, and an offline build passes -DPHOSPHOR_DEPS_ARCHIVES=<dir> naming a directory that holds them. Every packaging recipe in the repository already supplies them, and a build against the system Luau or valijson works as before. Luau moves from 0.737 to 0.745. (#1190)

Fixed

  • Editor settings changed in the Settings app reach an open editor: snapping, shortcuts and fill on drop changed on the Editor page while the layout editor was open did not reach it until it was restarted, and a later change made in the editor could write the old values back. The editor now picks them up once they are saved, and it only ever writes the settings changed in the editor itself. (#1161)
  • The Settings app no longer undoes a change made elsewhere: with unsaved changes open in the Settings app, a setting changed meanwhile by the layout editor was put back to its old value when the app saved. The app now takes in the outside change and keeps its own unsaved changes on top. (#1172)
  • A config file with a typo is no longer overwritten while PlasmaZones runs: if config.json was edited by hand and could not be read, the next save from a running PlasmaZones replaced it, which lost every setting in it. A running PlasmaZones now refuses to save over an unreadable file and keeps the settings it last read, and the Settings app says which file to repair. The layout editor and the Settings app no longer move a broken file aside when they start. The PlasmaZones service still does at its own start, renaming it to config.json.corrupt.bak, and that includes a start triggered by opening one of them. (#1172)
  • Equalize Column Widths works after you resize a column by hand: dragging a scrolling column wider pushes its neighbour part way off the screen, and Equalize Column Widths then did nothing, because it only shared the screen between columns that were wholly on it. It now counts every column that reaches onto the screen, clipped ones included, and brings the clipped ones fully into view. A press also lines the columns back up with the screen's edges when their widths already match but a small scroll or a centering setting left one cut off. A width shortcut on the focused column, such as Maximize Column or Increase Column Width, now keeps that column in view after an equalize or a scroll by hand instead of leaving it partly off screen. (#1195)
  • A tiled window you maximize stays maximized with borderless maximized windows on: with KWin's "Borderless maximized windows" setting on, maximizing a tiled window took its title bar off. PlasmaZones read that as a change in the window's minimum size and tiled it again, so the window dropped straight back to its tile. A maximize you ask for now holds. (#1182, #1192)
  • Placement conditions are listed under Placement: the rule editor's condition picker grouped Floating, Snapped, Tiled and Zone under a Tiling heading, even though Snapped and Zone belong to snapping, so the Zone condition was easy to miss. The heading now reads Placement. (#1194)
  • Tiling algorithm settings open on a value they can show: an algorithm's on/off or choice setting whose declared default was not a real true or false, or not one of its own choices, opened in Settings as a switch that read as on whatever it said, or as a list with nothing picked. Such a default now falls back to off, or to the first choice. (#1191)
  • A tiling algorithm with a reserved id no longer counts as loaded: a user algorithm that declared an id PlasmaZones keeps for itself, such as none, was refused but still counted toward the script limit, and deleting its file later announced a change to every open view. It is now skipped like any other refused script. (#1191)

Installation

Arch Linux (AUR):

yay -S plasmazones  # or plasmazones-bin

Arch Linux (manual):

sudo pacman -U plasmazones-3.5.5-*-x86_64.pkg.tar.zst

Debian testing/unstable (apt repository):
Tracks KDE as it lands in Debian and rebuilds when KWin moves.

sudo curl -fsSL https://download.opensuse.org/repositories/home:fuddlesworth/Debian_Unstable/Release.key -o /etc/apt/keyrings/plasmazones.asc
echo 'deb [signed-by=/etc/apt/keyrings/plasmazones.asc] https://download.opensuse.org/repositories/home:/fuddlesworth/Debian_Unstable/ /' | sudo tee /etc/apt/sources.list.d/plasmazones.list
sudo apt update
sudo apt install plasmazones

On Debian testing, swap Debian_Unstable for Debian_Testing in both lines. Packages are built for x86_64 only.

Debian (manual .deb):
Built on Debian unstable. Prefer the apt repository above, which rebuilds when KWin moves.

sudo dpkg -i plasmazones_3.5.5-*_amd64.deb
sudo apt-get install -f  # Install dependencies if needed

Fedora (COPR):

sudo dnf copr enable fuddlesworth/PlasmaZones
sudo dnf install plasmazones

Fedora (manual RPM):

# Fedora 44
sudo dnf install plasmazones-3.5.5-*.fc44.x86_64.rpm
# Fedora 45
sudo dnf install plasmazones-3.5.5-*.fc45.x86_64.rpm

openSUSE Tumbleweed (OBS):

sudo zypper addrepo https://download.opensuse.org/repositories/home:fuddlesworth/openSUSE_Tumbleweed/home:fuddlesworth.repo
sudo zypper refresh
sudo zypper install plasmazones

Fedora Atomic (Kinoite):
Layer the COPR package. Replace 44 with your Fedora release.

sudo curl -fsSL -o /etc/yum.repos.d/plasmazones.repo https://copr.fedorainfracloud.org/coprs/fuddlesworth/PlasmaZones/repo/fedora-44/fuddlesworth-PlasmaZones-fedora-44.repo
rpm-ostree install plasmazones
systemctl reboot

Arch-based tarball (no root):
Built on Arch Linux, so it only runs where KWin is exactly the version Arch shipped at release time and Qt is the same or newer. It does not work on Fedora, Debian or SteamOS. The installer checks both versions and stops before copying anything if they do not match.

tar xzf plasmazones-3.5.5-linux-x86_64.tar.gz
cd plasmazones-linux-x86_64
./install.sh

NixOS (flake):

# flake.nix inputs
plasmazones.url = "github:phosphor-works/PlasmaZones";

# configuration.nix
programs.plasmazones.enable = true;

NixOS (without flakes):
Build this tag's source against your host's pkgs (no release asset needed):

# configuration.nix
environment.systemPackages = [
  (pkgs.callPackage
    "${builtins.fetchTarball "https://github.com/phosphor-works/PlasmaZones/archive/v3.5.5.tar.gz"}/packaging/nix/package.nix"
    { version = "3.5.5"; })
];

Post-Installation

systemctl --user enable --now plasmazones.service
systemsettings kcm_plasmazones

PlasmaZones v3.5.5

Choose a tag to compare

@github-actions github-actions released this 05 Nov 02:02
Immutable release. Only release title and notes can be modified.

PlasmaZones v3.5.5

Added

  • Adjustable editor background: the layout editor's background no longer has to cover the desktop at a fixed 70%. A button in the editor's bottom bar opens a slider for it, and another slider under Settings → Editor → Appearance does the same. Either one sets how much of the desktop and its windows show through behind the zones, down to fully clear. (#1161)

Changed

  • Luau and valijson are fetched at build time: the source no longer carries copies of Luau and valijson. The first configure downloads both as archives pinned by version and SHA-256 in cmake/PhosphorDependencies.cmake, and an offline build passes -DPHOSPHOR_DEPS_ARCHIVES=<dir> naming a directory that holds them. Every packaging recipe in the repository already supplies them, and a build against the system Luau or valijson works as before. Luau moves from 0.737 to 0.745. (#1190)

Fixed

  • Editor settings changed in the Settings app reach an open editor: snapping, shortcuts and fill on drop changed on the Editor page while the layout editor was open did not reach it until it was restarted, and a later change made in the editor could write the old values back. The editor now picks them up once they are saved, and it only ever writes the settings changed in the editor itself. (#1161)
  • The Settings app no longer undoes a change made elsewhere: with unsaved changes open in the Settings app, a setting changed meanwhile by the layout editor was put back to its old value when the app saved. The app now takes in the outside change and keeps its own unsaved changes on top. (#1172)
  • A config file with a typo is no longer overwritten while PlasmaZones runs: if config.json was edited by hand and could not be read, the next save from a running PlasmaZones replaced it, which lost every setting in it. A running PlasmaZones now refuses to save over an unreadable file and keeps the settings it last read, and the Settings app says which file to repair. The layout editor and the Settings app no longer move a broken file aside when they start. The PlasmaZones service still does at its own start, renaming it to config.json.corrupt.bak, and that includes a start triggered by opening one of them. (#1172)
  • Equalize Column Widths works after you resize a column by hand: dragging a scrolling column wider pushes its neighbour part way off the screen, and Equalize Column Widths then did nothing, because it only shared the screen between columns that were wholly on it. It now counts every column that reaches onto the screen, clipped ones included, and brings the clipped ones fully into view. A press also lines the columns back up with the screen's edges when their widths already match but a small scroll or a centering setting left one cut off. A width shortcut on the focused column, such as Maximize Column or Increase Column Width, now keeps that column in view after an equalize or a scroll by hand instead of leaving it partly off screen. (#1195)
  • A tiled window you maximize stays maximized with borderless maximized windows on: with KWin's "Borderless maximized windows" setting on, maximizing a tiled window took its title bar off. PlasmaZones read that as a change in the window's minimum size and tiled it again, so the window dropped straight back to its tile. A maximize you ask for now holds. (#1182, #1192)
  • Placement conditions are listed under Placement: the rule editor's condition picker grouped Floating, Snapped, Tiled and Zone under a Tiling heading, even though Snapped and Zone belong to snapping, so the Zone condition was easy to miss. The heading now reads Placement. (#1194)
  • Tiling algorithm settings open on a value they can show: an algorithm's on/off or choice setting whose declared default was not a real true or false, or not one of its own choices, opened in Settings as a switch that read as on whatever it said, or as a list with nothing picked. Such a default now falls back to off, or to the first choice. (#1191)
  • A tiling algorithm with a reserved id no longer counts as loaded: a user algorithm that declared an id PlasmaZones keeps for itself, such as none, was refused but still counted toward the script limit, and deleting its file later announced a change to every open view. It is now skipped like any other refused script. (#1191)

Installation

Arch Linux (AUR):

yay -S plasmazones  # or plasmazones-bin

Arch Linux (manual):

sudo pacman -U plasmazones-3.5.5-*-x86_64.pkg.tar.zst

Debian testing/unstable (apt repository):
Tracks KDE as it lands in Debian and rebuilds when KWin moves.

sudo curl -fsSL https://download.opensuse.org/repositories/home:fuddlesworth/Debian_Unstable/Release.key -o /etc/apt/keyrings/plasmazones.asc
echo 'deb [signed-by=/etc/apt/keyrings/plasmazones.asc] https://download.opensuse.org/repositories/home:/fuddlesworth/Debian_Unstable/ /' | sudo tee /etc/apt/sources.list.d/plasmazones.list
sudo apt update
sudo apt install plasmazones

On Debian testing, swap Debian_Unstable for Debian_Testing in both lines. Packages are built for x86_64 only.

Debian (manual .deb):
Built on Debian unstable. Prefer the apt repository above, which rebuilds when KWin moves.

sudo dpkg -i plasmazones_3.5.5-*_amd64.deb
sudo apt-get install -f  # Install dependencies if needed

Fedora (COPR):

sudo dnf copr enable fuddlesworth/PlasmaZones
sudo dnf install plasmazones

Fedora (manual RPM):

# Fedora 44
sudo dnf install plasmazones-3.5.5-*.fc44.x86_64.rpm
# Fedora 45
sudo dnf install plasmazones-3.5.5-*.fc45.x86_64.rpm

openSUSE Tumbleweed (OBS):

sudo zypper addrepo https://download.opensuse.org/repositories/home:fuddlesworth/openSUSE_Tumbleweed/home:fuddlesworth.repo
sudo zypper refresh
sudo zypper install plasmazones

Fedora Atomic (Kinoite):
Layer the COPR package. Replace 44 with your Fedora release.

sudo curl -fsSL -o /etc/yum.repos.d/plasmazones.repo https://copr.fedorainfracloud.org/coprs/fuddlesworth/PlasmaZones/repo/fedora-44/fuddlesworth-PlasmaZones-fedora-44.repo
rpm-ostree install plasmazones
systemctl reboot

Arch-based tarball (no root):
Built on Arch Linux, so it only runs where KWin is exactly the version Arch shipped at release time and Qt is the same or newer. It does not work on Fedora, Debian or SteamOS. The installer checks both versions and stops before copying anything if they do not match.

tar xzf plasmazones-3.5.5-linux-x86_64.tar.gz
cd plasmazones-linux-x86_64
./install.sh

NixOS (flake):

# flake.nix inputs
plasmazones.url = "github:fuddlesworth/PlasmaZones";

# configuration.nix
programs.plasmazones.enable = true;

NixOS (without flakes):
Build this tag's source against your host's pkgs (no release asset needed):

# configuration.nix
environment.systemPackages = [
  (pkgs.callPackage
    "${builtins.fetchTarball "https://github.com/fuddlesworth/PlasmaZones/archive/v3.5.5.tar.gz"}/packaging/nix/package.nix"
    { version = "3.5.5"; })
];

Post-Installation

systemctl --user enable --now plasmazones.service
systemsettings kcm_plasmazones

PlasmaZones v3.5.4

Choose a tag to compare

@github-actions github-actions released this 03 Nov 00:59
Immutable release. Only release title and notes can be modified.

PlasmaZones v3.5.4

Added

  • Keep a window floating while "Always re-insert on drag" is on: with always re-insert turned on for scrolling or tiling, every drag put the window back into the strip or stack, so a floating window could not be moved without being taken in again. The re-insert trigger now works the other way round while always re-insert is on. Hold it, or tap it in toggle mode, and the dragged window floats instead. If you move windows with the same key as the trigger, such as Alt, pick a different trigger. (#1162)
  • Pick a zone for a Zone condition: a rule's Zone condition now offers every zone of every layout, grouped by layout and named as in the editor, where it used to need the zone's ID typed in by hand. That makes a rule for one zone easy to write, for example keeping a window above the others while it sits in a zone that overlaps a panel. The rule list shows the same names. (#1163)
  • Rules can tell a monitor's resolutions apart: rules gain Screen width, Screen height and Screen aspect ratio conditions, so one monitor can get a different layout or tiling algorithm at a different resolution. A super-ultrawide whose split mode halves its width can keep one layout for each mode. The width and height are the monitor's own pixels before display scaling, and the rule editor shows each pinned monitor's current size under the condition. (#1145, #1165)
  • Fedora 45 packages: each release now carries Fedora 45 RPMs for x86_64 and aarch64 next to the Fedora 44 ones. An RPM only loads against the KWin it was built with, so every Fedora release needs a build of its own. Thanks @jtbrough. (#1177)

Fixed

  • PlasmaZones no longer keeps fullscreen games and videos from skipping compositing: PlasmaZones kept an invisible overlay over every screen for as long as it ran, which stopped KWin from handing a fullscreen window straight to the display (direct scanout), so such windows were always composited and paid for it in latency. The overlay is now taken down once nothing is showing on it, including when a window drag ends. Overlays such as the layout OSD also show only their own fade-in now, without a second fade over the whole screen on top of it. Showing an overlay while Show Desktop is active now ends Show Desktop, the way opening a window does. (#1169, #1170)
  • Windows without a window class show up in the window picker: an app that names no window class, as Gamescope can, was left out of the rule editor's window picker even though PlasmaZones places it. It is now listed by its title and can be picked for a Title condition. The modes that need a window class show it greyed out with a hint to match it by title. (#1163)
  • A window class picked from the window picker matches the window: the picker offered only the last part of a window's class, such as "org.kde.konsole", while a Window Class condition compares the whole class KWin reports, such as "konsole org.kde.konsole", so a picked class set to equal never matched. The picker now offers the whole class. (#1163)
  • The Echo pointer trail no longer leaves a black box over some apps: moving the pointer over an app that supplies its own cursor image, as Steam and VLC do, turned the whole area around the Echo trail black with the echoes drawn inside it. The trail now draws over those apps the same way it does everywhere else. (#1164)
  • Layout rules follow a monitor that rotates or changes resolution: a layout chosen by a rule about the monitor's orientation stayed on the old layout after the monitor was rotated, until something unrelated changed. It now switches as soon as the monitor does, and the same goes for the new screen size and aspect ratio conditions and for resizing or splitting virtual screens. (#1165)
  • Gap rules reach windows that are already snapped: a rule that sets a snapping screen's gaps only applied to windows snapped after it changed, so editing it, switching colour scheme, or a monitor changing to a size the rule tests left the snapped windows on the old gaps until each was snapped again. They now move to the new gaps straight away, the way they do when you change the gap settings. (#1165)
  • The rules page's monitor tiles show what applies right now: a tile showed the first rule naming its monitor even when that rule also asked for an orientation, colour scheme or window count the monitor did not have, and it ignored a rule that set only a layout. Each tile now works out the layout, lock and rule count the way the daemon does, against the monitor's current state and the rules as you are editing them. (#1165)
  • The editor shows fixed zones that don't fit the screen where they really land: a layout of fixed-size zones bigger than the screen was shrunk in the editor to fit its canvas, so it looked as if it fit while PlasmaZones placed its zones past the screen edge. The editor now draws every fixed zone at its true size and position, pixel for pixel when you edit in fullscreen and scaled to the window otherwise, so a zone that runs off the screen runs off the canvas too. (#1167, #1171)
  • COPR rebuilds reach dnf: when a KWin update made PlasmaZones republish a release, the COPR package kept the version and revision of the one before it, so dnf never offered the rebuilt package and the KWin effect stayed unloaded on the new KWin. From 3.5.4 on, a rebuild carries its revision in the package and dnf upgrades to it. (#1178, #1180)
  • A tiling algorithm or shader pack can no longer stall PlasmaZones: reading back what a tiling algorithm returned had no time or size limit, so an algorithm that returned a table holding itself, or one long piece of text referenced many times over, could hang the daemon or run it out of memory. Such a result is now refused as an error, the same as an algorithm that fails. A shader pack could also include any readable file on the system by giving its full path, or a file large enough to stall KWin while the pack loaded. An include by full path is now refused, and so is an included file over 1 MiB or a shader that grows too large once its includes are filled in. (#1175, #1176, #1181)

Installation

Arch Linux (AUR):

yay -S plasmazones  # or plasmazones-bin

Arch Linux (manual):

sudo pacman -U plasmazones-3.5.4-*-x86_64.pkg.tar.zst

Debian testing/unstable (apt repository):
Tracks KDE as it lands in Debian and rebuilds when KWin moves.

sudo curl -fsSL https://download.opensuse.org/repositories/home:fuddlesworth/Debian_Unstable/Release.key -o /etc/apt/keyrings/plasmazones.asc
echo 'deb [signed-by=/etc/apt/keyrings/plasmazones.asc] https://download.opensuse.org/repositories/home:/fuddlesworth/Debian_Unstable/ /' | sudo tee /etc/apt/sources.list.d/plasmazones.list
sudo apt update
sudo apt install plasmazones

On Debian testing, swap Debian_Unstable for Debian_Testing in both lines. Packages are built for x86_64 only.

Debian (manual .deb):
Built on Debian unstable. Prefer the apt repository above, which rebuilds when KWin moves.

sudo dpkg -i plasmazones_3.5.4-*_amd64.deb
sudo apt-get install -f  # Install dependencies if needed

Fedora (COPR):

sudo dnf copr enable fuddlesworth/PlasmaZones
sudo dnf install plasmazones

Fedora (manual RPM):

# Fedora 44
sudo dnf install plasmazones-3.5.4-*.fc44.x86_64.rpm
# Fedora 45
sudo dnf install plasmazones-3.5.4-*.fc45.x86_64.rpm

openSUSE Tumbleweed (OBS):

sudo zypper addrepo https://download.opensuse.org/repositories/home:fuddlesworth/openSUSE_Tumbleweed/home:fuddlesworth.repo
sudo zypper refresh
sudo zypper install plasmazones

Fedora Atomic (Kinoite):
Layer the COPR package. Replace 44 with your Fedora release.

sudo curl -fsSL -o /etc/yum.repos.d/plasmazones.repo https://copr.fedorainfracloud.org/coprs/fuddlesworth/PlasmaZones/repo/fedora-44/fuddlesworth-PlasmaZones-fedora-44.repo
rpm-ostree install plasmazones
systemctl reboot

Arch-based tarball (no root):
Built on Arch Linux, so it only runs where KWin is exactly the version Arch shipped at release time and Qt is the same or newer. It does not work on Fedora, Debian or SteamOS. The installer checks both versions and stops before copying anything if they do not match.

tar xzf plasmazones-3.5.4-linux-x86_64.tar.gz
cd plasmazones-linux-x86_64
./install.sh

NixOS (flake):

# flake.nix inputs
plasmazones.url = "github:fuddlesworth/PlasmaZones";

# configuration.nix
programs.plasmazones.enable = true;

NixOS (without flakes):
Build this tag's source against your host's pkgs (no release asset needed):

# configuration.nix
environment.systemPackages = [
  (pkgs.callPackage
    "${builtins.fetchTarball "https://github.com/fuddlesworth/PlasmaZones/archive/v3.5....
Read more

PlasmaZones v3.5.3 (package revision 3)

Choose a tag to compare

@github-actions github-actions released this 02 Nov 00:28
Immutable release. Only release title and notes can be modified.

PlasmaZones v3.5.3

This is package revision 3 of 3.5.3. The source is unchanged. The packages were rebuilt because a distribution moved to a KWin the previous packages were not compiled against, and the KWin effect only loads against the exact version it was built for. Install it as you would any update and the overlay comes back. The notes below are those of 3.5.3.

Fixed

  • A window taller than its scrolling tile no longer covers the tile below it: a window that made itself taller than its share of a column it was stacked in with others, as some games do to keep a whole-number scale, hung over the window under it. Its tile now gets the height the window takes and the other tiles in the column share what is left, or the window floats when the column cannot hold them all. The tile gives that height back once the window has its column to itself again on every desktop it is shown on, once the column's width changes, or once you resize the window across the strip yourself. On a strip that runs vertically this applies to the window's width. Like the width, this is learned only while "Respect minimum size" is on. (#1156)
  • An X11 window wider than its scrolling column widens the column too: the column widening for a window that makes itself wider than its column worked only for Wayland apps. An X11 app running through XWayland that keeps resizing itself past its column now widens the column the same way. A single resize that KWin or a script makes is still put back. (#1157)
  • A scrolling column that was once wider peeks past the screen edge again: a column that had once been wider than it is now stayed hidden off screen whenever it reached past the edge, instead of showing the part that fits, until it was shown in full. It now peeks again once the window has taken its narrower size. (#1154)
  • Move to Screen hands a scrolling window cropped at the screen edge to the other screen's strip: a column reaching past the edge of its monitor, with most of it on the neighbouring monitor, was not taken in by that monitor's strip when you sent it there with Move to Screen, and PlasmaZones could pull it back to the monitor it came from. (#1153)
  • Fixed-size zones can keep their exact pixel size under display scaling: a fixed-size zone's numbers are scaled pixels, like every other size in Plasma, so a layout drawn to fill a screen at 100% grew with the display scaling and overflowed it at 125%. The layout settings in the editor now offer "Fixed sizes count physical pixels". With it on, a zone keeps the size you entered on the screen itself at any scaling, and layouts follow when a screen's scaling changes. Existing layouts are unchanged until you turn it on. (#1160)
  • Resizing a centred scrolling column with the mouse puts its edge where you let go: with the focused column always centred, or a lone column centred, dragging one edge of a window in the strip changed the column by the drag and then centred it again, so the edge you dragged moved back by half the distance and reaching the edge of the screen took several tries. The column now changes by twice the drag when it will be centred, so the dragged edge stays where you released it and the other edge moves to match. The same holds across the strip for a lone window or a tabbed column when short columns are centred, which is the top or bottom edge on a strip that runs side to side and the left or right edge on one that runs top to bottom. A window stacked with others still takes the drag as it is. The far edge moves only when you let go, because the window is KWin's to resize while you drag. When the focused column is not centred, dragging its leading edge now keeps the far edge where it was, so the edge you dragged also lands where you let go. (#1158)
  • An app's splash screen no longer sizes its main window: with a minimum window size set, a splash screen smaller than it, like the one Discord and Equibop show while loading, was left alone. When it closed, though, PlasmaZones remembered its size and spot, and the app's main window opening next took them and floated there. Being as small as the splash, it then stayed out of tiling and snapping. A window kept out of placement, by its size or by a rule, is no longer remembered when it closes. (#1158)
  • A floating window dragged into the scrolling strip keeps its size: with the default column width or window height set to "Window decides", a floating window dragged into the strip was given the fallback size on that axis instead of the size it had. It now joins the strip at the width you were holding, and at the height you were holding too when it lands in a column of its own, and the drop indicator shows that size. With a set column width, a window that floated as it opened and is then dragged into the strip takes that width, where it used to get half the screen. (#1158)
  • Snapped windows go back to their zones after a visit to a tiling or scrolling desktop: a window shown on several desktops, snapped on one and placed by a tiling or scrolling desktop on the same monitor, stayed at its tile or strip size and position when you went back to the snapping desktop, until you picked the layout again. It now returns to its zone. A window snapped across several zones gets all of them back when its monitor returns to the layout it was snapped in, where it used to keep only the first, and a window that never made it into a tiling or scrolling desktop is no longer moved to a stale position when you leave that desktop. (#1151)
  • A window on several desktops keeps its place on each of them: a title change could arrive with the window's desktops listed in another order, and PlasmaZones then took the window to have left all but one of them and forgot its zone or tile there. A window on several activities could lose them the same way, and keeps them now too. (#1147)
  • Activities are followed when the activity service starts after PlasmaZones: if the activity manager was not running yet when PlasmaZones started, switching activities later changed nothing in PlasmaZones until it was restarted, so per-activity layouts and rules stayed on the activity it started with. (#1146)
  • Only the compositor can report what it sees: the calls through which the KWin effect tells PlasmaZones where windows are, what size they committed, when they open, close, move or are dragged, and what the screens look like, could be made by any program on your session bus, and PlasmaZones acted on them as fact. They are now accepted only from the compositor that registered, and a program that tries one is refused. Only the compositor's own process can register, so no other program can take that registration, even one that starts before KWin or registers while PlasmaZones restarts. The check is made on KWin's connection to the session bus, which every KWin effect and KWin script shares, so those calls are accepted along with the PlasmaZones effect's own. (#1155)
  • Switching Tiling off and on again keeps your Tiling quick-layout shortcuts: turning Tiling off cleared the layouts you had put on the Tiling quick-layout shortcuts, and turning it back on did not bring them back. They are now kept. (#1158)
  • A floating window reopens where it floated on a split monitor: once a monitor was split into virtual screens, a window remembered floating on it was still filed under the whole monitor, so it was not restored when it opened again. It now reopens on the part of the monitor it floated on. (#1158)
  • Brazilian Portuguese button tooltips read as actions: tooltips for removing a preset, an action, a condition, a zone or a template column used a form that describes rather than asks, such as "Remove esta predefinição". They now read as actions, as in "Remover esta predefinição". (#1152)

Installation

Arch Linux (AUR):

yay -S plasmazones  # or plasmazones-bin

Arch Linux (manual):

sudo pacman -U plasmazones-3.5.3-*-x86_64.pkg.tar.zst

Debian testing/unstable (apt repository):
Tracks KDE as it lands in Debian and rebuilds when KWin moves.

sudo curl -fsSL https://download.opensuse.org/repositories/home:fuddlesworth/Debian_Unstable/Release.key -o /etc/apt/keyrings/plasmazones.asc
echo 'deb [signed-by=/etc/apt/keyrings/plasmazones.asc] https://download.opensuse.org/repositories/home:/fuddlesworth/Debian_Unstable/ /' | sudo tee /etc/apt/sources.list.d/plasmazones.list
sudo apt update
sudo apt install plasmazones

On Debian testing, swap Debian_Unstable for Debian_Testing in both lines. Packages are built for x86_64 only.

Debian (manual .deb):
Built on Debian unstable. Prefer the apt repository above, which rebuilds when KWin moves.

sudo dpkg -i plasmazones_3.5.3-*_amd64.deb
sudo apt-get install -f  # Install dependencies if needed

Fedora (COPR):

sudo dnf copr enable fuddlesworth/PlasmaZones
sudo dnf install plasmazones

Fedora (manual RPM):

# Fedora 44
sudo dnf install plasmazones-3.5.3-*.fc44.x86_64.rpm
# Fedora 45
sudo dnf install plasmazones-3.5.3-*.fc45.x86_64.rpm
...
Read more

PlasmaZones v3.5.3 (package revision 2)

Choose a tag to compare

@github-actions github-actions released this 29 Oct 15:30
Immutable release. Only release title and notes can be modified.

PlasmaZones v3.5.3

This is package revision 2 of 3.5.3. The source is unchanged. The packages were rebuilt because a distribution moved to a KWin the previous packages were not compiled against, and the KWin effect only loads against the exact version it was built for. Install it as you would any update and the overlay comes back. The notes below are those of 3.5.3.

Fixed

  • A window taller than its scrolling tile no longer covers the tile below it: a window that made itself taller than its share of a column it was stacked in with others, as some games do to keep a whole-number scale, hung over the window under it. Its tile now gets the height the window takes and the other tiles in the column share what is left, or the window floats when the column cannot hold them all. The tile gives that height back once the window has its column to itself again on every desktop it is shown on, once the column's width changes, or once you resize the window across the strip yourself. On a strip that runs vertically this applies to the window's width. Like the width, this is learned only while "Respect minimum size" is on. (#1156)
  • An X11 window wider than its scrolling column widens the column too: the column widening for a window that makes itself wider than its column worked only for Wayland apps. An X11 app running through XWayland that keeps resizing itself past its column now widens the column the same way. A single resize that KWin or a script makes is still put back. (#1157)
  • A scrolling column that was once wider peeks past the screen edge again: a column that had once been wider than it is now stayed hidden off screen whenever it reached past the edge, instead of showing the part that fits, until it was shown in full. It now peeks again once the window has taken its narrower size. (#1154)
  • Move to Screen hands a scrolling window cropped at the screen edge to the other screen's strip: a column reaching past the edge of its monitor, with most of it on the neighbouring monitor, was not taken in by that monitor's strip when you sent it there with Move to Screen, and PlasmaZones could pull it back to the monitor it came from. (#1153)
  • Fixed-size zones can keep their exact pixel size under display scaling: a fixed-size zone's numbers are scaled pixels, like every other size in Plasma, so a layout drawn to fill a screen at 100% grew with the display scaling and overflowed it at 125%. The layout settings in the editor now offer "Fixed sizes count physical pixels". With it on, a zone keeps the size you entered on the screen itself at any scaling, and layouts follow when a screen's scaling changes. Existing layouts are unchanged until you turn it on. (#1160)
  • Resizing a centred scrolling column with the mouse puts its edge where you let go: with the focused column always centred, or a lone column centred, dragging one edge of a window in the strip changed the column by the drag and then centred it again, so the edge you dragged moved back by half the distance and reaching the edge of the screen took several tries. The column now changes by twice the drag when it will be centred, so the dragged edge stays where you released it and the other edge moves to match. The same holds across the strip for a lone window or a tabbed column when short columns are centred, which is the top or bottom edge on a strip that runs side to side and the left or right edge on one that runs top to bottom. A window stacked with others still takes the drag as it is. The far edge moves only when you let go, because the window is KWin's to resize while you drag. When the focused column is not centred, dragging its leading edge now keeps the far edge where it was, so the edge you dragged also lands where you let go. (#1158)
  • An app's splash screen no longer sizes its main window: with a minimum window size set, a splash screen smaller than it, like the one Discord and Equibop show while loading, was left alone. When it closed, though, PlasmaZones remembered its size and spot, and the app's main window opening next took them and floated there. Being as small as the splash, it then stayed out of tiling and snapping. A window kept out of placement, by its size or by a rule, is no longer remembered when it closes. (#1158)
  • A floating window dragged into the scrolling strip keeps its size: with the default column width or window height set to "Window decides", a floating window dragged into the strip was given the fallback size on that axis instead of the size it had. It now joins the strip at the width you were holding, and at the height you were holding too when it lands in a column of its own, and the drop indicator shows that size. With a set column width, a window that floated as it opened and is then dragged into the strip takes that width, where it used to get half the screen. (#1158)
  • Snapped windows go back to their zones after a visit to a tiling or scrolling desktop: a window shown on several desktops, snapped on one and placed by a tiling or scrolling desktop on the same monitor, stayed at its tile or strip size and position when you went back to the snapping desktop, until you picked the layout again. It now returns to its zone. A window snapped across several zones gets all of them back when its monitor returns to the layout it was snapped in, where it used to keep only the first, and a window that never made it into a tiling or scrolling desktop is no longer moved to a stale position when you leave that desktop. (#1151)
  • A window on several desktops keeps its place on each of them: a title change could arrive with the window's desktops listed in another order, and PlasmaZones then took the window to have left all but one of them and forgot its zone or tile there. A window on several activities could lose them the same way, and keeps them now too. (#1147)
  • Activities are followed when the activity service starts after PlasmaZones: if the activity manager was not running yet when PlasmaZones started, switching activities later changed nothing in PlasmaZones until it was restarted, so per-activity layouts and rules stayed on the activity it started with. (#1146)
  • Only the compositor can report what it sees: the calls through which the KWin effect tells PlasmaZones where windows are, what size they committed, when they open, close, move or are dragged, and what the screens look like, could be made by any program on your session bus, and PlasmaZones acted on them as fact. They are now accepted only from the compositor that registered, and a program that tries one is refused. Only the compositor's own process can register, so no other program can take that registration, even one that starts before KWin or registers while PlasmaZones restarts. The check is made on KWin's connection to the session bus, which every KWin effect and KWin script shares, so those calls are accepted along with the PlasmaZones effect's own. (#1155)
  • Switching Tiling off and on again keeps your Tiling quick-layout shortcuts: turning Tiling off cleared the layouts you had put on the Tiling quick-layout shortcuts, and turning it back on did not bring them back. They are now kept. (#1158)
  • A floating window reopens where it floated on a split monitor: once a monitor was split into virtual screens, a window remembered floating on it was still filed under the whole monitor, so it was not restored when it opened again. It now reopens on the part of the monitor it floated on. (#1158)
  • Brazilian Portuguese button tooltips read as actions: tooltips for removing a preset, an action, a condition, a zone or a template column used a form that describes rather than asks, such as "Remove esta predefinição". They now read as actions, as in "Remover esta predefinição". (#1152)

Installation

Arch Linux (AUR):

yay -S plasmazones  # or plasmazones-bin

Arch Linux (manual):

sudo pacman -U plasmazones-3.5.3-*-x86_64.pkg.tar.zst

Debian testing/unstable (apt repository):
Tracks KDE as it lands in Debian and rebuilds when KWin moves.

sudo curl -fsSL https://download.opensuse.org/repositories/home:fuddlesworth/Debian_Unstable/Release.key -o /etc/apt/keyrings/plasmazones.asc
echo 'deb [signed-by=/etc/apt/keyrings/plasmazones.asc] https://download.opensuse.org/repositories/home:/fuddlesworth/Debian_Unstable/ /' | sudo tee /etc/apt/sources.list.d/plasmazones.list
sudo apt update
sudo apt install plasmazones

On Debian testing, swap Debian_Unstable for Debian_Testing in both lines. Packages are built for x86_64 only.

Debian (manual .deb):
Built on Debian unstable. Prefer the apt repository above, which rebuilds when KWin moves.

sudo dpkg -i plasmazones_3.5.3-*_amd64.deb
sudo apt-get install -f  # Install dependencies if needed

Fedora (COPR):

sudo dnf copr enable fuddlesworth/PlasmaZones
sudo dnf install plasmazones

Fedora (manual RPM):

# Fedora 44
sudo dnf install plasmazones-3.5.3-*.fc44.x86_64.rpm

openSUSE Tumbleweed (OBS):

sudo zypper addrepo h...
Read more

PlasmaZones v3.5.3

Choose a tag to compare

@github-actions github-actions released this 25 Oct 02:02
Immutable release. Only release title and notes can be modified.

PlasmaZones v3.5.3

Fixed

  • A window taller than its scrolling tile no longer covers the tile below it: a window that made itself taller than its share of a column it was stacked in with others, as some games do to keep a whole-number scale, hung over the window under it. Its tile now gets the height the window takes and the other tiles in the column share what is left, or the window floats when the column cannot hold them all. The tile gives that height back once the window has its column to itself again on every desktop it is shown on, once the column's width changes, or once you resize the window across the strip yourself. On a strip that runs vertically this applies to the window's width. Like the width, this is learned only while "Respect minimum size" is on. (#1156)
  • An X11 window wider than its scrolling column widens the column too: the column widening for a window that makes itself wider than its column worked only for Wayland apps. An X11 app running through XWayland that keeps resizing itself past its column now widens the column the same way. A single resize that KWin or a script makes is still put back. (#1157)
  • A scrolling column that was once wider peeks past the screen edge again: a column that had once been wider than it is now stayed hidden off screen whenever it reached past the edge, instead of showing the part that fits, until it was shown in full. It now peeks again once the window has taken its narrower size. (#1154)
  • Move to Screen hands a scrolling window cropped at the screen edge to the other screen's strip: a column reaching past the edge of its monitor, with most of it on the neighbouring monitor, was not taken in by that monitor's strip when you sent it there with Move to Screen, and PlasmaZones could pull it back to the monitor it came from. (#1153)
  • Fixed-size zones can keep their exact pixel size under display scaling: a fixed-size zone's numbers are scaled pixels, like every other size in Plasma, so a layout drawn to fill a screen at 100% grew with the display scaling and overflowed it at 125%. The layout settings in the editor now offer "Fixed sizes count physical pixels". With it on, a zone keeps the size you entered on the screen itself at any scaling, and layouts follow when a screen's scaling changes. Existing layouts are unchanged until you turn it on. (#1160)
  • Resizing a centred scrolling column with the mouse puts its edge where you let go: with the focused column always centred, or a lone column centred, dragging one edge of a window in the strip changed the column by the drag and then centred it again, so the edge you dragged moved back by half the distance and reaching the edge of the screen took several tries. The column now changes by twice the drag when it will be centred, so the dragged edge stays where you released it and the other edge moves to match. The same holds across the strip for a lone window or a tabbed column when short columns are centred, which is the top or bottom edge on a strip that runs side to side and the left or right edge on one that runs top to bottom. A window stacked with others still takes the drag as it is. The far edge moves only when you let go, because the window is KWin's to resize while you drag. When the focused column is not centred, dragging its leading edge now keeps the far edge where it was, so the edge you dragged also lands where you let go. (#1158)
  • An app's splash screen no longer sizes its main window: with a minimum window size set, a splash screen smaller than it, like the one Discord and Equibop show while loading, was left alone. When it closed, though, PlasmaZones remembered its size and spot, and the app's main window opening next took them and floated there. Being as small as the splash, it then stayed out of tiling and snapping. A window kept out of placement, by its size or by a rule, is no longer remembered when it closes. (#1158)
  • A floating window dragged into the scrolling strip keeps its size: with the default column width or window height set to "Window decides", a floating window dragged into the strip was given the fallback size on that axis instead of the size it had. It now joins the strip at the width you were holding, and at the height you were holding too when it lands in a column of its own, and the drop indicator shows that size. With a set column width, a window that floated as it opened and is then dragged into the strip takes that width, where it used to get half the screen. (#1158)
  • Snapped windows go back to their zones after a visit to a tiling or scrolling desktop: a window shown on several desktops, snapped on one and placed by a tiling or scrolling desktop on the same monitor, stayed at its tile or strip size and position when you went back to the snapping desktop, until you picked the layout again. It now returns to its zone. A window snapped across several zones gets all of them back when its monitor returns to the layout it was snapped in, where it used to keep only the first, and a window that never made it into a tiling or scrolling desktop is no longer moved to a stale position when you leave that desktop. (#1151)
  • A window on several desktops keeps its place on each of them: a title change could arrive with the window's desktops listed in another order, and PlasmaZones then took the window to have left all but one of them and forgot its zone or tile there. A window on several activities could lose them the same way, and keeps them now too. (#1147)
  • Activities are followed when the activity service starts after PlasmaZones: if the activity manager was not running yet when PlasmaZones started, switching activities later changed nothing in PlasmaZones until it was restarted, so per-activity layouts and rules stayed on the activity it started with. (#1146)
  • Only the compositor can report what it sees: the calls through which the KWin effect tells PlasmaZones where windows are, what size they committed, when they open, close, move or are dragged, and what the screens look like, could be made by any program on your session bus, and PlasmaZones acted on them as fact. They are now accepted only from the compositor that registered, and a program that tries one is refused. Only the compositor's own process can register, so no other program can take that registration, even one that starts before KWin or registers while PlasmaZones restarts. The check is made on KWin's connection to the session bus, which every KWin effect and KWin script shares, so those calls are accepted along with the PlasmaZones effect's own. (#1155)
  • Switching Tiling off and on again keeps your Tiling quick-layout shortcuts: turning Tiling off cleared the layouts you had put on the Tiling quick-layout shortcuts, and turning it back on did not bring them back. They are now kept. (#1158)
  • A floating window reopens where it floated on a split monitor: once a monitor was split into virtual screens, a window remembered floating on it was still filed under the whole monitor, so it was not restored when it opened again. It now reopens on the part of the monitor it floated on. (#1158)
  • Brazilian Portuguese button tooltips read as actions: tooltips for removing a preset, an action, a condition, a zone or a template column used a form that describes rather than asks, such as "Remove esta predefinição". They now read as actions, as in "Remover esta predefinição". (#1152)

Installation

Arch Linux (AUR):

yay -S plasmazones  # or plasmazones-bin

Arch Linux (manual):

sudo pacman -U plasmazones-3.5.3-*-x86_64.pkg.tar.zst

Debian testing/unstable (apt repository):
Tracks KDE as it lands in Debian and rebuilds when KWin moves.

sudo curl -fsSL https://download.opensuse.org/repositories/home:fuddlesworth/Debian_Unstable/Release.key -o /etc/apt/keyrings/plasmazones.asc
echo 'deb [signed-by=/etc/apt/keyrings/plasmazones.asc] https://download.opensuse.org/repositories/home:/fuddlesworth/Debian_Unstable/ /' | sudo tee /etc/apt/sources.list.d/plasmazones.list
sudo apt update
sudo apt install plasmazones

On Debian testing, swap Debian_Unstable for Debian_Testing in both lines. Packages are built for x86_64 only.

Debian (manual .deb):
Built on Debian unstable. Prefer the apt repository above, which rebuilds when KWin moves.

sudo dpkg -i plasmazones_3.5.3-*_amd64.deb
sudo apt-get install -f  # Install dependencies if needed

Fedora (COPR):

sudo dnf copr enable fuddlesworth/PlasmaZones
sudo dnf install plasmazones

Fedora (manual RPM):

# Fedora 44
sudo dnf install plasmazones-3.5.3-*.fc44.x86_64.rpm

openSUSE Tumbleweed (OBS):

sudo zypper addrepo https://download.opensuse.org/repositories/home:fuddlesworth/openSUSE_Tumbleweed/home:fuddlesworth.repo
sudo zypper refresh
sudo zypper install plasmazones

Fedora Atomic (Kinoite):
Layer the COPR package. Replace 44 with your Fedora release.

sudo curl -fsSL -o /etc/yum.repos.d/plasmazones.repo https://copr.fedorainfracloud.org/coprs/...
Read more

PlasmaZones v3.5.2

Choose a tag to compare

@github-actions github-actions released this 22 Oct 15:14
Immutable release. Only release title and notes can be modified.

PlasmaZones v3.5.2

Fixed

  • Window decorations, animations and pointer effects work again with Mesa drivers on Plasma 6.8: Plasma 6.8 compiles effect shaders as GLSL ES 3.00, which Plasma 6.7 already did when it ran on a GLES context, and that dialect does not allow a location on the values one shader stage hands the next. Every shader the compositor built carried such locations, and the Mesa drivers most AMD and Intel graphics run on refuse them. Decorated windows lost their borders and rounded corners, and window animations, desktop transitions and pointer effects did not play. NVIDIA accepted the same shaders, which is why only some systems were affected. The pack validator now compiles animation, surface and pointer packs in that dialect too, and links each fragment stage against the vertex stage it runs with, so a pack that would fail this way is caught before it ships. Zone overlay packs do not run in the compositor and are not part of that check. Pack authors should note that the compositor pairs those values between stages by name, so a vertex output and the fragment input that reads it need the same name. (#1142, #1143)
  • Shader compile errors name the right line: an error in a shader pack that leaves main() to PlasmaZones was reported several lines past the fault, in the validator, the editor preview and the compositor log alike, because the lines PlasmaZones adds above the pack's own code were counted as part of it. On Plasma 6.7 with desktop OpenGL, the compositor log was also one line off for every pack. All of them now give the line in the pack's own file. (#1143)
  • A window wider than its scrolling column sat on top of the next column: some Wayland apps, such as a game that keeps a whole-number multiple of its native resolution, make their window wider than the column they are given. The strip kept laying the column out at the width it had offered, so the next column started underneath the window. The column now widens to the width the window actually takes, and gives that width back when the window later takes less. On a strip that runs vertically this applies to the window's height. A window that needs more room than the screen has, along the strip or across it, floats instead. A column you make wider than the window keeps the width you set, and resizing the window yourself along the strip makes the strip measure it again. The width a window takes is learned only while "Respect minimum size" is on, under Settings → Placement → Scrolling → Window → Window handling. (#1129)
  • Hidden scrolling tabs stay fully off screen on Plasma 6.8: the tabs a column was not showing, and the columns scrolled out of view, are moved off the screen to hide them. Plasma 6.8 kept a strip of each one visible along the edge of the screen. They are now hidden completely, including after a window resizes or you switch tabs. (#1141)

Installation

Arch Linux (AUR):

yay -S plasmazones  # or plasmazones-bin

Arch Linux (manual):

sudo pacman -U plasmazones-3.5.2-*-x86_64.pkg.tar.zst

Debian testing/unstable (apt repository):
Tracks KDE as it lands in Debian and rebuilds when KWin moves.

sudo curl -fsSL https://download.opensuse.org/repositories/home:fuddlesworth/Debian_Unstable/Release.key -o /etc/apt/keyrings/plasmazones.asc
echo 'deb [signed-by=/etc/apt/keyrings/plasmazones.asc] https://download.opensuse.org/repositories/home:/fuddlesworth/Debian_Unstable/ /' | sudo tee /etc/apt/sources.list.d/plasmazones.list
sudo apt update
sudo apt install plasmazones

On Debian testing, swap Debian_Unstable for Debian_Testing in both lines. Packages are built for x86_64 only.

Debian (manual .deb):
Built on Debian unstable. Prefer the apt repository above, which rebuilds when KWin moves.

sudo dpkg -i plasmazones_3.5.2-*_amd64.deb
sudo apt-get install -f  # Install dependencies if needed

Fedora (COPR):

sudo dnf copr enable fuddlesworth/PlasmaZones
sudo dnf install plasmazones

Fedora (manual RPM):

# Fedora 44
sudo dnf install plasmazones-3.5.2-*.fc44.x86_64.rpm

openSUSE Tumbleweed (OBS):

sudo zypper addrepo https://download.opensuse.org/repositories/home:fuddlesworth/openSUSE_Tumbleweed/home:fuddlesworth.repo
sudo zypper refresh
sudo zypper install plasmazones

Universal Linux (AppDir):
For Fedora Atomic, Steam Deck, or non-root user installation:

tar xzf plasmazones-3.5.2-linux-x86_64.tar.gz
cd plasmazones-linux-x86_64
./install.sh

NixOS (flake):

# flake.nix inputs
plasmazones.url = "github:fuddlesworth/PlasmaZones";

# configuration.nix
programs.plasmazones.enable = true;

NixOS (without flakes):
Build this tag's source against your host's pkgs (no release asset needed):

# configuration.nix
environment.systemPackages = [
  (pkgs.callPackage
    "${builtins.fetchTarball "https://github.com/fuddlesworth/PlasmaZones/archive/v3.5.2.tar.gz"}/packaging/nix/package.nix"
    { version = "3.5.2"; })
];

Post-Installation

systemctl --user enable --now plasmazones.service
systemsettings kcm_plasmazones

PlasmaZones v3.5.1

Choose a tag to compare

@github-actions github-actions released this 16 Oct 18:29
Immutable release. Only release title and notes can be modified.

PlasmaZones v3.5.1

Fixed

  • Dialog window animations stay upright on Plasma 6.8: popups such as KDialog message boxes no longer show their contents upside down while opening or closing.

Installation

Arch Linux (AUR):

yay -S plasmazones  # or plasmazones-bin

Arch Linux (manual):

sudo pacman -U plasmazones-3.5.1-*-x86_64.pkg.tar.zst

Debian testing/unstable (apt repository):
Tracks KDE as it lands in Debian and rebuilds when KWin moves.

sudo curl -fsSL https://download.opensuse.org/repositories/home:fuddlesworth/Debian_Unstable/Release.key -o /etc/apt/keyrings/plasmazones.asc
echo 'deb [signed-by=/etc/apt/keyrings/plasmazones.asc] https://download.opensuse.org/repositories/home:/fuddlesworth/Debian_Unstable/ /' | sudo tee /etc/apt/sources.list.d/plasmazones.list
sudo apt update
sudo apt install plasmazones

On Debian testing, swap Debian_Unstable for Debian_Testing in both lines. Packages are built for x86_64 only.

Debian (manual .deb):
Built on Debian unstable. Prefer the apt repository above, which rebuilds when KWin moves.

sudo dpkg -i plasmazones_3.5.1-*_amd64.deb
sudo apt-get install -f  # Install dependencies if needed

Fedora (COPR):

sudo dnf copr enable fuddlesworth/PlasmaZones
sudo dnf install plasmazones

Fedora (manual RPM):

# Fedora 44
sudo dnf install plasmazones-3.5.1-*.fc44.x86_64.rpm

openSUSE Tumbleweed (OBS):

sudo zypper addrepo https://download.opensuse.org/repositories/home:fuddlesworth/openSUSE_Tumbleweed/home:fuddlesworth.repo
sudo zypper refresh
sudo zypper install plasmazones

Universal Linux (AppDir):
For Fedora Atomic, Steam Deck, or non-root user installation:

tar xzf plasmazones-3.5.1-linux-x86_64.tar.gz
cd plasmazones-linux-x86_64
./install.sh

NixOS (flake):

# flake.nix inputs
plasmazones.url = "github:fuddlesworth/PlasmaZones";

# configuration.nix
programs.plasmazones.enable = true;

NixOS (without flakes):
Build this tag's source against your host's pkgs (no release asset needed):

# configuration.nix
environment.systemPackages = [
  (pkgs.callPackage
    "${builtins.fetchTarball "https://github.com/fuddlesworth/PlasmaZones/archive/v3.5.1.tar.gz"}/packaging/nix/package.nix"
    { version = "3.5.1"; })
];

Post-Installation

systemctl --user enable --now plasmazones.service
systemsettings kcm_plasmazones

PlasmaZones v3.5.0

Choose a tag to compare

@github-actions github-actions released this 16 Oct 17:26
Immutable release. Only release title and notes can be modified.

PlasmaZones v3.5.0

Added

  • Six blur packs gain brightness, contrast, saturation, vibrancy and noise controls: no blur pack offered the whole set before, and most offered only a tint, so a blurred pane could not be lifted, muted or dithered the way a stock blur-behind effect allows. Blur, Glass, Frosted Glass, Rippled Glass, Rain on Glass and Phosphor Glass now expose the set, and Duotone gains the noise beside the contrast it already had. Mosaic takes none of them, being a pixel mosaic rather than a blur. Every one of these new controls is neutral at its default, so none of them changes anything until you move it. Vibrancy comes from Hyprland and lifts saturation mostly where a colour is already fairly saturated and bright, so a muted wallpaper stays muted. The noise is a fine grain over the blur that hides banding in smooth gradients. Frosted Glass keeps its own Voronoi grain instead of taking the shared one, and Glass keeps a grain tuned to a driver-dependent hash, so those two look slightly different from machine to machine where the rest do not. (#1123)
  • Glass refraction gains the controls Better Blur's refraction has: a bevel curve that shapes how the bend falls off from the rim, a concave lens mode that draws the backdrop in toward the pane's centre near its edges, the way a thick slab reads, and an edge mirror that folds the backdrop back inside the pane where a strong bend reaches past its edge. Left off, the bend keeps reading the captured scene beside the pane, which can make the edges look see-through. The edge mirror is on Rippled Glass and Rain on Glass, whose ripple and droplet offsets push the sample in whatever direction the surface points, and on Glass, where the concave lens is the one mode that reaches past the pane. Glass's other two modes bend inward, so the mirror has nothing to fold back for them. (#1123)
  • Blur presets for the looks people compare against: the Blur pack ships three presets, named after the effects they are aimed at. "Plasma" is a modest blur close to the stock one, "Better Blur" is a wide radius with lifted saturation, and "Hyprland" sets brightness, contrast, noise, vibrancy, saturation and a 128 px radius. They approximate those looks rather than reproducing any upstream's exact defaults. (#1123)
  • Every pack that draws a pane's outline can round or square its bottom corners, and most can soften that edge: "Round bottom corners" is on by default, and turning it off rounds only the top two, which suits a pane sitting against a panel or the screen edge. Twenty packs carry it now, the eight Blur-category packs plus the ten Borders packs, Glow and Drop Shadow, so every pack in a chain describes the same shape. Set it on any pack in the chain and the whole chain follows, and where two packs have it set differently the one earliest in the chain wins. "Edge softness" sets the anti-alias feather of the edge, and eighteen of those twenty offer it. The eight Blur packs and nine of the ten Borders packs gained it in this release, Border already had it, and Glow and Drop Shadow take the corner switch alone because a halo's feather already follows its own reach. (#1123, #1126)
  • A window on all desktops keeps its own place on each one: a window set to show on every virtual desktop used to have a single placement that followed it around. It now holds a separate one per desktop, in all three modes. In scrolling it can sit in one column of one desktop's strip and a different column of another's. In tiling it takes a tile on each desktop. In snapping it can be snapped into a different zone on each desktop. Those placements survive desktop switches and a restart. This also fixes a bug where switching desktops with such a window on screen could swap two desktops' scrolling strips and drop several windows out of them. (#1103)

Changed

  • Dropping a window on a zone of another layout in the zone selector moves the other windows too: the monitor switched to the layout you dropped on, but the other windows snapped there stayed where they were and lost their zones. They now move the way a quick-layout shortcut moves them, each into the same-numbered zone of the new layout, or back to its floating spot when the new layout has fewer zones. (#1125)
  • A maximized or fullscreen snapped window stays that way when its zone is put back: switching layouts or desktops, a panel or screen change, PlasmaZones restarting, reopening the window or restoring it from minimize used to drop its maximize, or move it while it stayed fullscreen. It now stays maximized or fullscreen, and returns to its zone, the new one after a layout switch, when you unmaximize it or leave fullscreen. A window that moves to another monitor still leaves both. This reverses part of the 3.4.8 change on purpose, for a window already maximized in its zone or one that opens maximized into a remembered zone. (#1125)
  • Snapping a fullscreen or maximized window ends its fullscreen and maximize: a snap shortcut, a drop, a Snap Assist pick or Restore on a fullscreen window used to leave it covering the monitor while PlasmaZones counted it as snapped, and a window moved out of a monocle stack or a maximized scrolling column could stay maximized in its new zone. The window now leaves fullscreen and maximize and lands where you put it. Floating a fullscreen window, or moving it to a tiling monitor, ends its fullscreen too. (#1125)
  • The blur-family packs blur with a dual Kawase pyramid: blur, glass, frosted glass, rippled glass, rain glass, duotone and phosphor glass used a two-pass Gaussian at quarter resolution, which was smooth but could not reach far. They now run a four-level pyramid down to a thirty-second of the canvas and back, the same shape stock blur effects use, so a radius up to 256 px stays smooth. A small radius uses fewer of those levels, with the passes above the level it stops at handing the matching down level through unchanged. The reach was recalibrated at the same time so that a radius reads as the width it names, so a pack at its old default is a close approximation of how it looked rather than a match. Under the hood an overlay, animation or surface pack may now declare up to eight buffer passes, where all three capped at four, while the pointer family keeps its own cap of two because its chain runs on every frame the pointer is live, and a surface pack can give each pass its own resolution through a new bufferScales list that the daemon and the KWin effect both honour. (#1123)
  • Shader packs can ask for smaller buffers: the smallest render target a pack could declare was an eighth of the canvas on each axis, and it is now a hundred and twenty-eighth. The blur pyramid needs the lower floor so that it keeps halving when you turn the decoration blur scale down, and the bound is shared with the overlay, animation and pointer families, so packs of every kind get it. An installed pack that declared a value below the old floor was quietly clamped up to it and is now honoured as written. (#1123)
  • The shared overlay multipass header gains a channelSize helper: a pack that sampled a buffer pass had to size it itself, and the four sizes the uniform block carries stopped covering the eight channels a chain can now run. The surface family has no equivalent and sizes a later channel with textureSize instead, which its own header says. The helper answers a channel's pixel size from the block where it has one and from the texture where it does not. It is a new public name in a header third-party packs include, so a pack that already defines a function called channelSize will fail to compile against this release and needs to rename its own. (#1123)
  • The blur radius goes up to 256 px: the cap was 64 px, well short of the wide, soft blur other blur effects reach at their default strength. This covers the seven Blur-category packs that have a blur radius, which is all of them but Mosaic. (#1123)
  • One descriptor-binding table for every shader family: the overlay, animation, surface and pointer contracts now take their sampler slots from a single shared table, which has room for eight buffer channels. Each family's header declares the samplers it needs at the slots that table assigns, and how many buffer channels a family actually runs varies. The pack validator reflects every baked stage against that table and fails a pack whose sampler sits at the wrong slot, which used to surface only as a pipeline failure with nothing naming the cause. A pack can only use the samplers the contract defines. One a pack declared for itself was never bound by anything on either host, and the validator now says so rather than passing it. (#1123)
  • A window that reopens is restored only on the monitor it opens on: at login, after PlasmaZones restarted, or when an app opened again, a window used to be moved back to the monitor it was last snapped or tiled on. Now it is restored only when its remembered zone or tile is on the monitor it opened on, and otherwise it stays where KWin put it. Two windows of one app on two monitors each come back on their own monitor. That is reversed on purpose, so ...
Read more