shapes.scad

LibFile: shapes.scad

This file has all the modules needed to make various shapes.

To use, add the following lines to the beginning of your file:

include <boardgame_toolkit.scad>

File Contents

1. Section: Shapes
   • MakeShapeObject()
   • Sword2d()
   • Sword2dOutline()
   • Crossbow2d()
   • Crossbow2dOutline()
   • Sledgehammer2d()
   • Sledgehammer2dOutline()
   • Shoe2d()
   • Shoe2dOutline()
   • Bag2d()
   • Bag2dOutline()
   • Torch2d()
   • Torch2dOutline()
   • Teapot2d()
   • Coin2d()
   • CoinPile2d()
   • australia_map_length
   • australia_map_width
   • AustraliaMapWidth()
   • AustraliaMap2d()
   • Rock2d()
   • ruins_2d_length
   • ruins_2d_width
   • Ruins2dWidth()
   • Ruins2d()
   • RockWall2d()
   • D20Outline2d()
   • SawBlade2d()
   • SawBlade2dOutline()
   • Handshake2d()
   • Fist2d()
   • Fist2dOutline()
   • Leaf2d()
   • LaurelWreath2d()
   • Anvil2d()
   • HalfEye2d()
   • SideEye2d()
   • CloudShape2d()
   • SingleLog2d()
   • Tower2d()
   • Sign2d()
   • ShapeNeedsInnerControl()
   • ShapeByType()
   • PortugalCastle()
   • TrainOutline()
   • WagonOutline()

Section: Shapes

Shapes to use in boxes and stuff.

Function: MakeShapeObject()

Arguments:

By Position	What it does
shape_type	The type of shape to use (default default_lid_shape_width)
shape_thickness	thickness of the shape (default default_lid_shape_thickness)
shape_width	width of the shape (default default_lid_shape_width)
shape_thickness	thickness of the shape (default default_lid_shape_thickness)
shape_aspect_ratio	aspect ratio of the shape (default default_lid_aspect_ratio)
rounding	rounding of the shape (default default_lid_shape_rounding)
supershape_m1	m1 of the supershape (default default_lid_supershape_m1)
supershape_m2	m2 of the supershape (default default_lid_supershape_m2)
supershape_n1	n1 of the supershape (default default_lid_supershape_n1)
supershape_n2	n2 of the supershape (default default_lid_supershape_n2)
supershape_n3	n3 of the supershape (default default_lid_supershape_n3)
supershape_a	a of the supershape (default default_lid_supershape_a)
supershape_b	b of the supershape (default default_lid_supershape_b)

---

Module: Sword2d()

Description:

2d shape of a sword.

Arguments:

By Position	What it does
length	length of the sword
width	width of the sword
blade_width	width of the blade (default width / 3)
hilt_length	length of the hilt (default length / 15)
hilt_pos	position on the blade where the hilt starts (default length / 7)
blade_rounding	how much rounding on the end of the blade (default 1)
hilt_rounding	how much rounding on the hilt (default 1)

Example 1:

include <boardgame_toolkit.scad>
Sword2d(100, 20);

---

Module: Sword2dOutline()

Description:

2d outline of a sword.

Arguments:

By Position	What it does
length	length of the sword
width	width of the sword
blade_width	width of the blade (default width / 3)
hilt_length	length of the hilt (default length / 15)
hilt_pos	position on the blade where the hilt starts (default length / 7)
blade_rounding	how much rounding on the end of the blade (default 1)
hilt_rounding	how much rounding on the hilt (default 1)
line_width	how wide the line is (default 1)

Example 1:

include <boardgame_toolkit.scad>
Sword2dOutline(100, 20);

---

Module: Crossbow2d()

Description:

A 2d crossbow shape.

Arguments:

By Position	What it does
length	length of the cross bpw.
width	width of the cross bow
handle_width	width of the handle bit (default width/8)
bow_width	width of the bow section of the bow (default width/4)
outer_circle	how big of a circle with the crossbow to draw (default width*2)

Example 1:

include <boardgame_toolkit.scad>
Crossbow2d(70, 50);

---

Module: Crossbow2dOutline()

Description:

An outline of a 2d crossbow shape.

Arguments:

By Position	What it does
length	length of the cross bpw.
width	width of the cross bow
handle_width	width of the handle bit (default width/8)
bow_width	width of the bow section of the bow (default width/4)
outer_circle	how big of a circle with the crossbow to draw (default width*2)
line_width	width of the line to display (default 1)

Example 1:

include <boardgame_toolkit.scad>
Crossbow2dOutline(70, 50);

---

Module: Sledgehammer2d()

Description:

A 2d sledgehammer shape.

Arguments:

By Position	What it does
length	length of the cross bpw.
width	width of the cross bow
handle_width	width of the handle bit (default width/4)
rounding_head	rounding amoubnt on the head (default width/5)
rounding_handle	rounding amount on the handle (default width/10)
head_length	length of the head

Example 1:

include <boardgame_toolkit.scad>
Sledgehammer2d(70, 50);

---

Module: Sledgehammer2dOutline()

Description:

An outline of a 2d sledgehammer shape.

Arguments:

By Position	What it does
length	length of the cross bpw.
width	width of the cross bow
handle_width	width of the handle bit (default width/4)
head_length	length of the head (default length/3.5)
rounding_head	rounding amoubnt on the head (default 2)
rounding_handle	rounding amount on the handle (default 1)
line_width	width of the lione (default 1)
strap_width	width of the strap outline(default line_width*4)

Example 1:

include <boardgame_toolkit.scad>
Sledgehammer2dOutline(70, 50);

---

Module: Shoe2d()

Description:

An nice 2d shoe shape.

Arguments:

By Position	What it does
size	size of the shoe
leg_length	length of the leg bit of the shoe (default size/3)
sole_height	height of the sole base of the shoe (default size/20)
base_width	height of the base part of the shoe (default size/3)

Example 1:

include <boardgame_toolkit.scad>
Shoe2d(50);

---

Module: Shoe2dOutline()

Description:

An nice 2d shoe outline shape.

Arguments:

By Position	What it does
size	size of the shoe
leg_length	length of the leg bit of the shoe (default size/3)
sole_height	height of the sole base of the shoe (default size/20)
base_width	height of the base part of the shoe (default size/3)
line_width	width of the outline line (default 1)

Example 1:

include <boardgame_toolkit.scad>
Shoe2dOutline(50);

---

Module: Bag2d()

Description:

An nice 2d bag shape.

Arguments:

By Position	What it does
size	size of the bag
base_round_diameter	round diameter of the base circles (default size/4)
main_round_diameter	round diameter of the middle bulge bit (default size/2)
neck_width	width of the neck of the bag (default size/6)
rope_length	length of the rope (default size/4)

Example 1:

include <boardgame_toolkit.scad>
Bag2d(50);

---

Module: Bag2dOutline()

Description:

An nice 2d bag outline shape.

Arguments:

By Position	What it does
size	size of the bag
base_round_diameter	round diameter of the base circles (default size/4)
main_round_diameter	round diameter of the middle bulge bit (default size/2)
neck_width	width of the neck of the bag (default size/6)
line_width	width of the line to use for the outline
rope_length	length of the rope

Example 1:

include <boardgame_toolkit.scad>
Bag2d(50);

---

Module: Torch2d()

Description:

An nice 2d torch shape.

Arguments:

By Position	What it does
length	length of the torch
width	width of the torch
handle_width	the width of the handle (default width/2)
head_length	length of the head (default length/7)

Example 1:

include <boardgame_toolkit.scad>
Torch2d(100, 20);

---

Module: Torch2dOutline()

Description:

An nice 2d torch outline shape.

Arguments:

By Position	What it does
length	length of the torch
width	width of the torch
handle_width	the width of the handle (default width/2)
head_length	length of the head (default length/7)
line_width	width of the line (default 1)

Example 1:

include <boardgame_toolkit.scad>
Torch2dOutline(100, 20);

---

Module: Teapot2d()

Description:

An nice 2d teapor shape.

Arguments:

By Position	What it does
length	length of the teapot
width	width of the teapot
top_width	top width of the teapot (default width*6/10)
top_length	length to the top part of the teapot.
top_circle_diameter	circle of the top part of the teapot
handle_rounding	rounding amount to use int he top handle
handle_width	width of the top handle
spout_length	length of the spout
side_handle_length	length of the side handle
side_handle_rounding	rounding of the bottom part of the handle

Example 1:

include <boardgame_toolkit.scad>
Teapot2d(100, 70);

---

Module: Coin2d()

Description:

A simple coin icon to use in things.

Arguments:

By Position	What it does
size	the size of the coin
text	text to put in the coin (default 1)
text_size	size of the text to use (dewfault size/2)

Example 1:

include <boardgame_toolkit.scad>
Coin2d(50);

Example 2:

include <boardgame_toolkit.scad>
Coin2d(50, text = "5");

---

Module: CoinPile2d()

Description:

Makes a coin pile to use in other places.

Arguments:

By Position	What it does
size	size of the pile
coin_num	number of coins in the pile (default 5)
rounding	how much to round the coins (default (size * 3 / 4) / (calc_coin_num * 2))

Example 1:

include <boardgame_toolkit.scad>
CoinPile2d(50);

Example 2:

include <boardgame_toolkit.scad>
CoinPile2d(50, coin_num=3);

Example 3:

include <boardgame_toolkit.scad>
CoinPile2d(50, coin_num=10);

---

Constant: australia_map_length

Description:

The length of the australian svg map

---

Constant: australia_map_width

Description:

The width of the australian svg map

---

Function: AustraliaMapWidth()

Description:

Works out the width of the map from the length.

---

Module: AustraliaMap2d()

Description:

a map of australia

Arguments:

By Position	What it does
length	length of the map

Example 1:

include <boardgame_toolkit.scad>
AustraliaMap2d(100);

---

Module: Rock2d()

Description:

Makes a rock shape to use in walls and things.

Arguments:

By Position	What it does
length	length of the rock
width	width of the rock
rounding	rounding on the edge of the rock (default min(width,lenght)/5)

---

Constant: ruins_2d_length

Description:

The length of the ruins svg

---

Constant: ruins_2d_width

Description:

The length of the ruins svg

---

Function: Ruins2dWidth()

Description:

Works out the width of the map from the length.

---

Module: Ruins2d()

Description:

Makes a small ruins image to use in stuff.

Example 1:

include <boardgame_toolkit.scad>
Ruins2d(50);

---

Module: RockWall2d()

Description:

Makes a nice rock wall

Arguments:

By Position	What it does
size	size of the rock wall
num_rows	number of rows (default 10)
num_cols	numer of cols (default 40)
spacing	spacing between rocks (default size/200)

Example 1:

include <boardgame_toolkit.scad>
RockWall2d(50);

---

Module: D20Outline2d()

Description:

Makes a nice d20 outline for some dice.

Arguments:

By Position	What it does
size	size of the die image
offset	the size of the walls

Example 1:

include <boardgame_toolkit.scad>
D20Outline2d(10, 0.5);

---

Module: SawBlade2d()

Description:

Makes a nice 2d saw blade.

Arguments:

By Position	What it does
size	size of the saw blade
inner_spindle_size	size of the inside spindle (default size/10)

---

Module: SawBlade2dOutline()

Description:

Makes a nice 2d saw blade.

Arguments:

By Position	What it does
size	size of the saw blade
inner_spindle_size	size of the inside spindle (default size/10)
outer_width	outer width of the shape

Example 1:

include <boardgame_toolkit.scad>
SawBlade2d(50);

---

Module: Handshake2d()

Description:

Creates two hands shaking hands.

Arguments:

By Position	What it does
size	size of the hands.

Example 1:

include <boardgame_toolkit.scad>
Handshake2d(30);

---

Module: Fist2d()

Description:

A nice fist for use in stuff. Fist is from fist printables by Vendicar Design

Arguments:

By Position	What it does
size	size of the fist

Example 1:

include <boardgame_toolkit.scad>
Fist2d(20);

---

Module: Fist2dOutline()

Description:

Outline of a fst

Arguments:

By Position	What it does
size	size of the fist
line_width	width of the line (default 1)

---

Module: Leaf2d()

Description:

Makes a nice leaf.

Arguments:

By Position	What it does
size	size of the leaf

---

Module: LaurelWreath2d()

Description:

Makes a laurel wreathe for use all over the place

Arguments:

By Position	What it does
size	size of the laurel

---

Module: Anvil2d()

Description:

Makes a nice 2d anvil.

Arguments:

By Position	What it does
size	size of the anvil
with_hammer	show a hammer on the anvil and spark too

Example 1:

include <boardgame_toolkit.scad>
Anvil2d(30);

Example 2:

include <boardgame_toolkit.scad>
Anvil2d(30, with_hammer = true);

---

Module: HalfEye2d()

Description:

Makes a single eye for use in various things where eyes are needed. This is a half eye on an angle.

Arguments:

By Position	What it does
angle	angle the eye is on
outer_size	size of the outside circle.
inner_size	size of the inside circle
pupil_size	size of the pupil

Example 1:

include <boardgame_toolkit.scad>
HalfEye2d(30);

Example 2:

include <boardgame_toolkit.scad>
HalfEye2d(60);

Example 3:

include <boardgame_toolkit.scad>
translate([-6, 0, 0]) HalfEye2d(60);
translate([6, 0, 0]) mirror([1, 0]) HalfEye2d(60);
// Nose.
translate([0, -4, 0]) {
  circle(d=3);
  translate([0, -2]) {
    rect([1, 3]);
    translate([-3, -1.5]) ring(r1=2.5, r2=3, angle=[360, 180], n=32);
    translate([3, -1.5]) mirror([1, 0]) ring(r1=2.5, r2=3, angle=[360, 180], n=32);
  }
}

---

Module: SideEye2d()

Description:

Makes a single eye for use in various things where eyes are needed. This is a half eye on an angle.

Arguments:

By Position	What it does
angle	angle the pupil is at
outer_size	size of the outside circle.
inner_size	size of the inside circle
pupil_size	size of the pupil

Example 1:

include <boardgame_toolkit.scad>
SideEye2d(30);

Example 2:

include <boardgame_toolkit.scad>
SideEye2d(90);

Example 3:

include <boardgame_toolkit.scad>
translate([6, 0, 0]) SideEye2d(90);
translate([-6, 0, 0]) SideEye2d(90);
translate([0, -4, 0]) {
  translate([1, 0.6]) rotate(30) rect([4, 1]);
  translate([-1, 0.6]) rotate(150) rect([4, 1]);
  circle(d=3);
}

---

Module: CloudShape2d()

Description:

Makes a cloud object. This object was made by Twanne on thingiverse: https://www.thingiverse.com/thing:641665/files

Arguments:

By Position	What it does
width	The width of the cloud. This also determine the height, because the height is half the width.

Example 1:

include <boardgame_toolkit.scad>
CloudShape2d(100);

---

Module: SingleLog2d()

Description:

A single log image.

Arguments:

By Position	What it does
size	size of the log
line_width	width of the line

Example 1:

include <boardgame_toolkit.scad>
SingleLog2d(15);

---

Module: Tower2d()

Description:

Make a single keep tower for use in gams and stuff.

Arguments:

By Position	What it does
size	size of the tower

Example 1:

include <boardgame_toolkit.scad>
Tower2d(20);

---

Module: Sign2d()

Description:

Makes a sign shape to use for stuff.

Arguments:

By Position	What it does
size	size of the sign

---

Function: ShapeNeedsInnerControl()

Description:

If the specified shape needs inner control

Arguments:

By Position	What it does
shnape_type	the type of shape to check

---

Module: ShapeByType()

Description:

Creates shapes by a specific type to use in the lids. This is pulled out so the shape creation layout are handled independantly.

Example 1:

include <boardgame_toolkit.scad>
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_DENSE_HEX, shape_thickness = 2, shape_width = 10));

Example 2:

include <boardgame_toolkit.scad>
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_DENSE_HEX, shape_thickness = 1, shape_width = 14));

Example 3:

include <boardgame_toolkit.scad>
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_DENSE_HEX, shape_thickness = 1, shape_width = 11));

Example 4:

include <boardgame_toolkit.scad>
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_DENSE_TRIANGLE, shape_thickness = 2, shape_width = 10));

Example 5:

include <boardgame_toolkit.scad>
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_CIRCLE, shape_thickness = 2, shape_width = 14));

Example 6:

include <boardgame_toolkit.scad>
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_TRIANGLE, shape_thickness = 2, shape_width = 10));

Example 7:

include <boardgame_toolkit.scad>
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_HEX, shape_thickness = 1, shape_width = 14));

Example 8:

include <boardgame_toolkit.scad>
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_OCTOGON, shape_thickness = 1, shape_width = 16));

Example 9:

include <boardgame_toolkit.scad>
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_OCTOGON, shape_thickness = 1, shape_width = 13, shape_aspect_ratio=1.25));

Example 10:

include <boardgame_toolkit.scad>
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_OCTOGON, shape_thickness = 1, shape_width = 10.5, shape_aspect_ratio=1));

Example 11:

include <boardgame_toolkit.scad>
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_SQUARE, shape_thickness = 2, shape_width = 11));

Example 12:

include <boardgame_toolkit.scad>
default_lid_shape_rounding = 3;
ShapeByType(MakeShapeObject(shape_type= SHAPE_TYPE_SQUARE, shape_thickness = 2, shape_width = 11));

Example 13:

include <boardgame_toolkit.scad>
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_CLOUD, shape_thickness = 2, shape_width = 11));

Example 14:

include <boardgame_toolkit.scad>
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_SUPERSHAPE, shape_thickness = 2));

Example 15:

include <boardgame_toolkit.scad>
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_SUPERSHAPE, shape_thickness = 2, supershape_m1 = 12, supershape_m2 = 12,
    supershape_n1 = 1, supershape_b = 1.5, shape_width = 15));

Example 16:

include <boardgame_toolkit.scad>
$polygon_x = 0;
$polygon_y = 0;
$polygon_grid_rows = 2;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_PENTAGON_R1, shape_thickness = 1, shape_width = 10));

Example 17:

include <boardgame_toolkit.scad>
$polygon_x = 0;
$polygon_y = 0;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_PENTAGON_R2, shape_thickness = 1, shape_width = 10));

Example 18:

include <boardgame_toolkit.scad>
$polygon_x = 0;
$polygon_y = 0;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_PENTAGON_R2, shape_thickness = 1, shape_width = 10, pentagon_first_angle_modifier=10));

Example 19:

include <boardgame_toolkit.scad>
$polygon_x = 0;
$polygon_y = 0;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_PENTAGON_R3, shape_thickness = 1, shape_width = 10));

Example 20:

include <boardgame_toolkit.scad>
$polygon_x = 0;
$polygon_y = 0;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_PENTAGON_R4, shape_thickness = 1, shape_width = 10));

Example 21:

include <boardgame_toolkit.scad>
$polygon_x = 0;
$polygon_y = 0;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_PENTAGON_R5, shape_thickness = 1, shape_width = 10));

Example 22:

include <boardgame_toolkit.scad>
$polygon_x = 0;
$polygon_y = 0;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_PENTAGON_R6, shape_thickness = 1, shape_width = 10));

Example 23:

include <boardgame_toolkit.scad>
$polygon_x = 0;
$polygon_y = 0;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_PENTAGON_R7, shape_thickness = 1, shape_width = 10));

Example 24:

include <boardgame_toolkit.scad>
$polygon_x = 0;
$polygon_y = 0;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_PENTAGON_R8, shape_thickness = 1, shape_width = 10));

Example 25:

include <boardgame_toolkit.scad>
$polygon_x = 0;
$polygon_y = 0;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_PENTAGON_R9, shape_thickness = 1, shape_width = 10));

Example 26:

include <boardgame_toolkit.scad>
$polygon_x = 0;
$polygon_y = 0;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_PENTAGON_R10, shape_thickness = 1, shape_width = 10));

Example 27:

include <boardgame_toolkit.scad>
$polygon_x = 0;
$polygon_y = 0;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_PENTAGON_R11, shape_thickness = 1, shape_width = 10));

Example 28:

include <boardgame_toolkit.scad>
$polygon_x = 0;
$polygon_y = 0;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_PENTAGON_R12, shape_thickness = 1, shape_width = 10));

Example 29:

include <boardgame_toolkit.scad>
$polygon_x = 0;
$polygon_y = 0;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_PENTAGON_R13, shape_thickness = 1, shape_width = 10));

Example 30:

include <boardgame_toolkit.scad>
$polygon_x = 0;
$polygon_y = 0;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_PENTAGON_R14, shape_thickness = 1, shape_width = 10));

Example 31:

include <boardgame_toolkit.scad>
$polygon_x = 0;
$polygon_y = 0;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_PENTAGON_R15, shape_thickness = 1, shape_width = 10));

Example 32:

include <boardgame_toolkit.scad>
$polygon_x = 0;
$polygon_y = 0;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_LIZARD, shape_thickness = 1, shape_width = 10));

Example 33:

include <boardgame_toolkit.scad>
$polygon_x = 0;
$polygon_y = 0;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_RHOMBI_TRI_HEXAGONAL, shape_thickness = 1, shape_width = 10));

Example 34:

include <boardgame_toolkit.scad>
$polygon_x = 0;
$polygon_y = 0;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_HALF_REGULAR_HEXAGON, shape_thickness = 1, shape_width = 20));

Example 35:

include <boardgame_toolkit.scad>
$polygon_x = 0;
$polygon_y = 0;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_DROP, shape_thickness = 1, shape_width = 10));

Example 36:

include <boardgame_toolkit.scad>
$polygon_width = 100;
$polygon_length = 100;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_VORONOI, shape_thickness = 1, shape_width = 10));

Example 37:

include <boardgame_toolkit.scad>
$polygon_width = 100;
$polygon_length = 100;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_PENROSE_TILING_5, shape_thickness = 1, shape_width = 10));

Example 38:

include <boardgame_toolkit.scad>
$polygon_width = 100;
$polygon_length = 100;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_PENROSE_TILING_7, shape_thickness = 1, shape_width = 10));

Example 39:

include <boardgame_toolkit.scad>
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_DELTOID_TRIHEXAGONAL, shape_thickness = 1, shape_width = 10));

Example 40:

include <boardgame_toolkit.scad>
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_DELTOID_TRIHEXAGONAL_KITE, shape_thickness = 1, shape_width = 10));

Example 41:

include <boardgame_toolkit.scad>
$polygon_x = 0;
$polygon_y = 0;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_PEGASUS, shape_thickness = 1, shape_width = 25));

Example 42:

include <boardgame_toolkit.scad>
$polygon_width = 100;
$polygon_length = 100;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_GOOSE, shape_thickness = 1, shape_width = 25));

Example 43:

include <boardgame_toolkit.scad>
$polygon_width = 100;
$polygon_length = 100;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_CHICKEN, shape_thickness = 1, shape_width = 25));

Example 44:

include <boardgame_toolkit.scad>
$polygon_width = 100;
$polygon_length = 100;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_SHEEP, shape_thickness = 1, shape_width = 25));

Example 45:

include <boardgame_toolkit.scad>
$polygon_width = 101;
$polygon_length = 100;
ShapeByType(MakeShapeObject(shape_type = SHAPE_TYPE_BIRD, shape_thickness = 1, shape_width = 25));

---

Module: PortugalCastle()

Description:

The castle used on the flag of portugal

Arguments:

By Position	What it does
stroke_width	width of the stroke to use for the castle outline
width	the final width of the castle.

Example 1:

include <boardgame_toolkit.scad>
PortugalCastle(0.2, 50);

---

Module: TrainOutline()

Description:

Creates a nice train outline to use for stuff.

Arguments:

By Position	What it does
length	length of the train

Example 1:

include <boardgame_toolkit.scad>
TrainOutline(100);

---

Module: WagonOutline()

Description:

Create a wagon outline from the exciting svg.

Arguments:

By Position	What it does
length	the length of the wagon

Example 1:

include <boardgame_toolkit.scad>
WagonOutline(50);

---