Bump the actions group with 4 updates

[dependabot]

Bumps the actions group with 4 updates: pnpm/setup, github/codeql-action/init, github/codeql-action/autobuild and github/codeql-action/analyze.

Updates pnpm/setup from 1.0.0 to 2.0.0

Release notes

Sourced from pnpm/setup's releases.

v2.0.0

The action no longer installs pnpm through npm. It downloads pnpm's self-contained release binary for the runner's platform straight from pnpm's GitHub releases, verifies it against the SHA-256 digest GitHub publishes for the asset, and puts it on PATH. No Node.js, no npm, no @pnpm/exe, no self-update round-trip.

That also makes the action immune to broken npm artifacts. pnpm 11.13.0's @pnpm/exe build shipped without its platform binary, which made v1 install a placeholder file that failed later with This: not found and exit code 127. The GitHub release binary for that same version is fine, so v2 installs it correctly. v2 additionally verifies the install by running pnpm --version and comparing it against the requested version, so a bad artifact fails immediately with a clear message instead of surfacing as a confusing error in a later step.

Breaking changes

pnpm v11 or newer is required. v1 could set up pnpm 10 via pnpm self-update; v2 rejects anything below v11 with an explanatory error. The action is built around pnpm's self-contained release binaries and the pnpm runtime command, both of which arrived in v11.

If you need pnpm 10 or older, use pnpm/action-setup instead.

The bin-dest output points somewhere new. It was ~/setup-pnpm/node_modules/.bin/bin; it is now ~/setup-pnpm (the dest directory itself). Workflows that read the output are unaffected — it still names the directory holding pnpm — but anything that hardcoded the old path needs updating.

cache-hit is stricter. It is now true only on an exact key match. v1 reported true for any restore. This matches what actions/cache means by cache-hit.

No inputs or outputs were removed or renamed.

What's new

• Flexible version specs. version accepts an exact version (12.0.0-beta.4), a semver range (^12.0.0), or an npm dist-tag (next-12). It is still optional when packageManager or devEngines.packageManager is set in package.json.
• Partial store cache reuse. Cache restore now falls back to restore keys, so a single changed dependency no longer forces a full re-download of the store.
• New token input. Used for the GitHub release lookup, defaulting to ${{ github.token }} so the low anonymous API rate limit doesn't apply. It rarely needs to be set.
• pnpx, pn, and pnx aliases are linked next to the pnpm binary.

Upgrading

For most workflows the upgrade is the tag:

-      - uses: pnpm/setup@v1
+      - uses: pnpm/setup@v2

Check first that the pnpm version you install — via the version input, packageManager, or devEngines.packageManager — is v11 or newer.

One platform caveat: pnpm v11 publishes no binary for Intel macOS (darwin-x64). Use pnpm v12 or newer on Intel macOS runners.

Commits

• c9883cc docs: reference v2 in examples; update pnpm to v12.0.0-beta.4 (#16)
• 4f13ee5 refactor: introduce restore keys for cache (#14)
• 6523ce9 feat: support pnpm v11 by downloading from GitHub releases (#12)
• 6bfbb82 feat!: install pnpm v12 as a standalone native executable (#11)
• 77cf068 docs: update version in examples
• See full diff in compare view

Updates github/codeql-action/init from 4.37.5 to 4.37.6

Release notes

Sourced from github/codeql-action/init's releases.

v4.37.6

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

Changelog

Sourced from github/codeql-action/init's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.37.6 - 04 Aug 2026

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

4.37.5 - 03 Aug 2026

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

4.36.3 - 01 Jul 2026

No user facing changes.

4.36.2 - 04 Jun 2026

• Cache CodeQL CLI version information across Actions steps. #3943
• Reduce requests while waiting for analysis processing by using exponential backoff when polling SARIF processing status. #3937
• Update default CodeQL bundle version to 2.25.6. #3948

... (truncated)

Commits

• 5595cca Merge pull request #4071 from github/update-v4.37.6-6a9359a1b
• ec9c757 Add change note for PR 4070
• 45c8742 Update changelog for v4.37.6
• 6a9359a Merge pull request #4070 from github/mbg/remote-address/change-file-default
• 065cdc0 Change DEFAULT_CONFIG_FILE_NAME
• f99dd5a Merge pull request #4066 from github/dependabot/npm_and_yarn/js-yaml-5.2.2
• 1804b21 Merge pull request #4068 from github/mergeback/v4.37.5-to-main-d1ba80a1
• 3020a2f Rebuild
• 93c3a5a Update changelog and version after v4.37.5
• 266c7bd Rebuild
• Additional commits viewable in compare view

Updates github/codeql-action/autobuild from 4.37.5 to 4.37.6

Release notes

Sourced from github/codeql-action/autobuild's releases.

v4.37.6

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

Changelog

Sourced from github/codeql-action/autobuild's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.37.6 - 04 Aug 2026

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

4.37.5 - 03 Aug 2026

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

4.36.3 - 01 Jul 2026

No user facing changes.

4.36.2 - 04 Jun 2026

• Cache CodeQL CLI version information across Actions steps. #3943
• Reduce requests while waiting for analysis processing by using exponential backoff when polling SARIF processing status. #3937
• Update default CodeQL bundle version to 2.25.6. #3948

... (truncated)

Commits

• 5595cca Merge pull request #4071 from github/update-v4.37.6-6a9359a1b
• ec9c757 Add change note for PR 4070
• 45c8742 Update changelog for v4.37.6
• 6a9359a Merge pull request #4070 from github/mbg/remote-address/change-file-default
• 065cdc0 Change DEFAULT_CONFIG_FILE_NAME
• f99dd5a Merge pull request #4066 from github/dependabot/npm_and_yarn/js-yaml-5.2.2
• 1804b21 Merge pull request #4068 from github/mergeback/v4.37.5-to-main-d1ba80a1
• 3020a2f Rebuild
• 93c3a5a Update changelog and version after v4.37.5
• 266c7bd Rebuild
• Additional commits viewable in compare view

Updates github/codeql-action/analyze from 4.37.5 to 4.37.6

Release notes

Sourced from github/codeql-action/analyze's releases.

v4.37.6

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

Changelog

Sourced from github/codeql-action/analyze's changelog.

CodeQL Action Changelog

See the releases page for the relevant changes to the CodeQL CLI and language packs.

[UNRELEASED]

No user facing changes.

4.37.6 - 04 Aug 2026

• Changed the default filepath for the new remote file address format that was introduced in CodeQL Action 4.37.0 / 3.37.0 to .github/codeql-config.yml to align it with the suggested path that is used elsewhere. #4070

4.37.5 - 03 Aug 2026

• Fixed a bug where a network error while streaming the download of the CodeQL bundle could terminate the init Action instead of falling back to downloading the bundle before extracting it. #4061

4.37.4 - 29 Jul 2026

• This version of the CodeQL Action adds support for the tools input for the codeql-action/init step to be specified using a github-codeql-tools repository property. This feature will gradually be rolled out following the release of this version. Once rolled out, this allows for the CodeQL CLI version that is used in GitHub-managed workflows, such as Default Setup, to be set to a custom value. For example, customers who run into issues with rate limits when a new CodeQL CLI version is released can set the value to toolcache to always use the CodeQL CLI version that is available in the runner toolcache. For Advanced Setup workflows, the value provided for tools in the workflow definition always takes precedence unless the value of the repository property starts with !. #4037
• Update default CodeQL bundle version to 2.26.2. #4051

4.37.3 - 22 Jul 2026

No user facing changes.

4.37.2 - 21 Jul 2026

• The new address format for the config-file input that was introduced in CodeQL Action 4.37.0 is now enabled by default. In addition to the format described there, the remote= prefix can now be used to explicitly indicate that the input refers to a remote file. All previous input formats continue to be accepted as well. #4023
• The CodeQL Action can now make use of configured private registries in Default Setup to retrieve CodeQL configuration files from remote repositories that require authentication. This will allow customers to store their CodeQL configuration in a single repository that can then be referenced by Default Setup workflows in other repositories. We expect to roll this and other, related changes out to everyone in July. #4007

4.37.1 - 16 Jul 2026

• Upcoming breaking change: Add a deprecation warning for customers using CodeQL version 2.20.6 and earlier. These versions of CodeQL were discontinued on 1 July 2026 alongside GitHub Enterprise Server 3.16, and will be unsupported by the next minor release of the CodeQL Action. #3956
• Update default CodeQL bundle version to 2.26.1. #4019

4.37.0 - 08 Jul 2026

• Update default CodeQL bundle version to 2.26.0. #3995
• In addition to the existing input format, the config-file input for the codeql-action/init step will soon support a new [owner/]repo[@ref][:path] format. All components except the repository name are optional. If omitted, owner defaults to the same owner as the repository the analysis is running for, ref to main, and path to .github/codeql-action.yaml. Support for this format ships in this version of the CodeQL Action, but will only be enabled over the coming weeks. #3973

4.36.3 - 01 Jul 2026

No user facing changes.

4.36.2 - 04 Jun 2026

• Cache CodeQL CLI version information across Actions steps. #3943
• Reduce requests while waiting for analysis processing by using exponential backoff when polling SARIF processing status. #3937
• Update default CodeQL bundle version to 2.25.6. #3948

... (truncated)

Commits

• 5595cca Merge pull request #4071 from github/update-v4.37.6-6a9359a1b
• ec9c757 Add change note for PR 4070
• 45c8742 Update changelog for v4.37.6
• 6a9359a Merge pull request #4070 from github/mbg/remote-address/change-file-default
• 065cdc0 Change DEFAULT_CONFIG_FILE_NAME
• f99dd5a Merge pull request #4066 from github/dependabot/npm_and_yarn/js-yaml-5.2.2
• 1804b21 Merge pull request #4068 from github/mergeback/v4.37.5-to-main-d1ba80a1
• 3020a2f Rebuild
• 93c3a5a Update changelog and version after v4.37.5
• 266c7bd Rebuild
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore <dependency name> major version will close this group update PR and stop Dependabot creating any more for the specific dependency's major version (unless you unignore this specific dependency's major version or upgrade to it yourself)
• @dependabot ignore <dependency name> minor version will close this group update PR and stop Dependabot creating any more for the specific dependency's minor version (unless you unignore this specific dependency's minor version or upgrade to it yourself)
• @dependabot ignore <dependency name> will close this group update PR and stop Dependabot creating any more for the specific dependency (unless you unignore this specific dependency or upgrade to it yourself)
• @dependabot unignore <dependency name> will remove all of the ignore conditions of the specified dependency
• @dependabot unignore <dependency name> <ignore condition> will remove the ignore condition of the specified dependency and ignore conditions