Windows Service

Windows Service

cronstable service registers the scheduler with the Windows Service Control Manager, so it starts at boot and keeps running whether or not anyone is logged on.

See Running on Windows for the rest of the platform's behavior, and CLI Reference for every other subcommand.

Quick start

From an elevated prompt (the commands work identically from a pip or pipx install and from the extracted cronstable.exe of the published one-directory zip):

cronstable init C:\ProgramData\cronstable
cronstable service install -c C:\ProgramData\cronstable
cronstable service start

cronstable service status reports the state and the process ID; sc query cronstable and the Services console (services.msc) see it like any other service.

Which installs can host a service

Install shape	Can host a service
pip install cronstable / pipx	yes
The published zip (a one-directory build)	yes
The MSI	yes (registers the service itself)
The published one-file .exe (also what winget installs)	no

The one-file executable cannot host a Windows service, and install refuses it by name rather than producing something that fails at start. A one-file build unpacks itself to a temporary directory and runs the program in a child process; the SCM starts and watches the parent bootloader, which never registers with the service dispatcher, so the start fails on the SCM's timeout while the real program's own registration is refused with error 1063. Nothing in cronstable can change that, because it is the bootloader that forks.

Download cronstable-windows-amd64.zip or cronstable-windows-arm64.zip (see Running on Windows), or install with pip or pipx, to run as a service. The MSI registers the service during the install with the same settings service install writes, so none of the commands above are needed there. The schtasks recipe remains the answer for the one-file executable, and it does start at boot and survive logoff; what it does not give you is the Services console, recovery actions and a real stop control.

Commands

Command	What it does
cronstable service install	Register the service. Needs elevation.
cronstable service remove	Stop it if running, then unregister. Needs elevation.
cronstable service start	Start it and wait until it reports running.
cronstable service stop	Ask it to stop, and wait for the drain.
cronstable service status	Print the state, the process ID, and why it last failed.
cronstable service run	What the SCM invokes. Not meant to be typed.

cronstable service run typed by hand prints an explanation and exits 2, rather than appearing to hang.

install

Flag	Default	Meaning
--name NAME	cronstable	Service name, for more than one instance on a host.
-c, --config	the platform default	Configuration the service will read. Baked into the command line as an absolute path.
--start-type	auto	auto, delayed (after the other automatic services) or demand.
--log-level LEVEL	INFO	Baked into the service's command line.
--log-file PATH	a logs directory beside the configuration	The bootstrap log.
--no-log-file	off	Do not open a bootstrap log.
--console	off	Allocate a console so job termination keeps its graceful step. See below.
--restart-delay SECONDS	60	How long Windows waits before restarting after a failure.
--no-restart	off	Do not configure recovery actions at all.

The service is installed to run as LocalSystem. Per-job and per-service identity (a named account, a gMSA, run levels) is not implemented; cronstable is single-principal on Windows.

The configuration path matters more than usual

A service runs as LocalSystem, whose %APPDATA% points into C:\Windows\System32\config\systemprofile, not into your profile. So a per-user configuration that works perfectly when you run cronstable interactively is simply not found when the SCM starts the same program.

install therefore refuses when -c was left at the platform default and that default resolved inside your own user profile: you did not choose that path, and installing it would produce a service that starts cleanly and schedules nothing. Name a machine-wide directory instead:

cronstable init C:\ProgramData\cronstable
cronstable service install -c C:\ProgramData\cronstable

A per-user path you name explicitly is a deliberate act and works, since LocalSystem can read the profile; it prints a note about the fragility and proceeds.

Recovery

Unless --no-restart is given, install configures Windows' own recovery: restart after --restart-delay seconds for the first two failures, then stop trying, with the failure count resetting daily. It also sets the flag that makes recovery apply to a clean exit with a nonzero code, not only to a crash. Without that flag the recovery actions would be decorative here, because this host reports its own failures as an orderly stop carrying an exit code rather than by crashing.

cronstable service status decodes the last failure:

Reported as	Meaning
the configuration did not parse	The -c path is missing or the YAML is invalid.
the service log could not be opened	The bootstrap log path is not writable.
the scheduler stopped with an error	The scheduler itself raised.

A stop you asked for is a clean stop and does not trigger recovery. That includes POST /shutdown: it drains and stops the service, and the service stays stopped rather than being restarted.

Where a service logs

A service has no console. Its sys.stdout and sys.stderr are not redirected somewhere unhelpful, they are None, so the default logging setup writes into nothing and cannot even report that it failed.

service run therefore opens a rotating bootstrap log before it does anything else, by default at <config directory>\logs\cronstable-service.log (10 MB, five backups). It records the command line, the resolved configuration path, the console decision and the log level; it is the first thing to read when a service will not start. If that file cannot be opened, the service refuses to start rather than running mute, because a service with no console and no log cannot be diagnosed at all.

A logging: section in the configuration still wins: it is applied on the first housekeeping pass and replaces the bootstrap handler. Configure it as the real log and treat the bootstrap file as the startup record. See Logging Configuration and the rotating-file recipe in Running on Windows.

The missing streams also decide where job output goes. With captureStdout or captureStderr set, cronstable echoes each captured line to its own stdout as well as saving it. A service has nowhere to echo to, so it skips that copy and logs the fact once rather than once per batch. Reports, GET /jobs/{name}/logs, the dashboard's live tail and archiveOutput read the saved lines, so they still see everything the job wrote.

--console and job termination

By default a service has no console, and that has one visible consequence: the graceful step of stopping a job cannot be delivered.

cronstable normally terminates a job in two steps, a trappable CTRL_BREAK_EVENT to the job's process group and then, killTimeout seconds later, a taskkill /F /T tree kill. The break needs a console shared between the daemon and the job. Without one the graceful step is skipped and the kill is immediate, so killTimeout bounds nothing. That applies to executionTimeout, to concurrencyPolicy: Replace and to a cancel from the API.

--console allocates a console for the service so the two-step works. It is off by default, because a console changes what a job inherits:

• the job is genuinely attached to that console. It can open CONIN$ and CONOUT$, GetConsoleWindow no longer returns NULL, and a pause or set /p in a .cmd can still block;
• cronstable points the service's own standard handles at nothing straight after allocating, so an uncaptured job does not inherit a console stdin that blocks instead of reaching end of file. That closes the handle half; it does not undo console membership, which is inherited separately and is the entire reason for allocating one;
• it costs one extra conhost.exe per service.

Turn it on when killTimeout has to mean something. Leave it off otherwise.

Removing

cronstable service stop
cronstable service remove

remove stops the service first and tolerates its already being stopped. If anything else holds a handle to the service (the Services console and Task Manager's Services tab both do), Windows marks it for deletion instead of deleting it, and a reinstall then fails with "the service is pending deletion". Close those windows and retry; status and install both name that condition when they hit it.

What the service does not change

Everything else behaves as it does in the foreground. The same configuration, the same jobs, the same HTTP control API and dashboard, the same durable state. @reboot jobs fire once per OS boot as documented. The scheduler drains running jobs on stop, and the SCM is told the stop is still in progress for as long as that takes, so a job that runs for an hour does not make the service look hung.

Related pages

• Running on Windows for the rest of the platform
• Windows Event Log for publishing outcomes where Windows monitoring looks
• Logging Configuration for the logging: section
• CLI Reference for every subcommand
• Troubleshooting for problem, cause and fix entries