AgentDeck ESP32 v1.2.3

AgentDeck ESP32 v1.2.3

The TRMNL 7.5-inch firmware now reports its canonical trmnl_75 board identity,
and release assets use that name. The daemons retain the legacy inkdeck alias
for existing firmware. Display behavior and protocol compatibility are unchanged.

Firmware for every board this repository builds. Each asset is named by the
board's canonical id — the same string the firmware reports as
device_info.board and the one agentdeck esp32-ota <target> takes, so the
file you download is the target you pass.

Board	Factory image	Display	PlatformIO env	Wi-Fi OTA	Browser flash
86 Box	agentdeck-86box-merged.bin	4" 480x480 ST7701	box_86	yes	yes
IPS 10.1"	agentdeck-ips_10-merged.bin	10.1" 800x1280 JD9365	ips10	yes	no
IPS 3.5"	agentdeck-ips_35-merged.bin	3.5" 480x320 AXS15231B	ips35	yes	untested
LilyGo T5 ePaper S3	agentdeck-lilygo_epd47-merged.bin	4.7" 960x540 grayscale e-ink ED047TC2	lilygo_epd47	yes	untested
RockBase NM-EPD-420	agentdeck-nm_epd_420-merged.bin	4.2" 400x300 tri-color e-ink GDEY042Z98	nm_epd_420	no	untested
Round AMOLED	agentdeck-round_amoled-merged.bin	1.8" 360x360 ST77916	amoled	yes	untested
Seeed TRMNL 7.5"	agentdeck-trmnl_75-merged.bin	7.5" 800x480 e-ink UC8179	trmnl_75	yes	yes
T-Display-S3-Pro	agentdeck-t_display_pro-merged.bin	2.33" 480x222 ST7796U	t_display_pro	yes	yes
T-Embed CC1101	agentdeck-t_embed-merged.bin	1.9" 320x170 ST7789	t_embed	yes	untested
TTGO T-Display	agentdeck-ttgo_t_display-merged.bin	1.14" 240x135 ST7789	ttgo	yes	yes
Ulanzi TC001	agentdeck-ulanzi_tc001-merged.bin	32x8 WS2812B matrix	led8x32	yes	yes
Waveshare C6-LCD-1.47	agentdeck-esp32_c6_147-merged.bin	1.47" 172x320 ST7789	esp32_c6_147	no	untested

Flash over USB

Each board ships a merged factory image — one file, written at one offset,
on every chip:

esptool --port PORT write-flash 0x0 agentdeck-<board>-merged.bin

The merged image already carries the bootloader, the partition table,
boot_app0 and the application, with the flash size and mode patched into its
header. That matters: the bootloader offset is chip-specific (0x1000 on ESP32,
0x2000 on ESP32-P4, 0x0 elsewhere), and writing the application alone leaves
boot_app0 pointing at whichever slot a previous OTA selected — so the board
can come up running the OLD firmware. The loose -bootloader.bin,
-partitions.bin, -boot_app0.bin and -<board>.bin files are still
published for recovery work; prefer the merged image.

manifest.json carries the same facts in machine-readable form (offsets,
sha256, per-board reset/baud settings). SHA256SUMS.txt covers every binary.

Update over Wi-Fi

agentdeck esp32-ota <board> --firmware agentdeck-<board>.bin

The board must already be provisioned and connected to the daemon over Wi-Fi.
86box and ips_10 units flashed before 2026-07-05 may still carry a
factory/NO_OTA layout and need one USB full flash first.

Flash from a browser

5 of 12 boards are hardware-verified for browser flashing
(Chrome or Edge on desktop, via Web Serial). Boards marked untested are listed
there too, disabled, with the reason — a hidden board reads as unsupported.

Full changelog: https://github.com/puritysb/AgentDeck/blob/esp32-v1.2.3/CHANGELOG.md