Skip to content

Releases: rodrigokiller/diskplot

Diskplot 0.3.3

Choose a tag to compare

@github-actions github-actions released this 06 Oct 04:56

New

  • A percentage while a drive is scanned, in the scan bar, in the panel under the tree and on the start sheet, with a progress line along the foot of the bar. A folder uses its last scan as the base.

Performance

  • The preview shown during a scan now goes only one level past what the treemap opens. It is smaller, so the scan itself finishes sooner: a full system drive went from 30 to 18 seconds on the author's machine.

Fixes

  • The treemap animation is the one from 0.3.1 again.

Novidades

  • Porcentagem durante o scan de uma unidade, na barra do scan, no painel embaixo da árvore e na tela inicial, com uma linha de progresso no pé da barra. Uma pasta usa o último scan dela como base.

Desempenho

  • A prévia mostrada durante o scan agora vai só um nível além do que o treemap abre. Ela fica menor, e o próprio scan termina antes: uma unidade de sistema inteira caiu de 30 para 18 segundos na máquina do autor.

Correções

  • A animação do treemap voltou a ser a da 0.3.1.

Diskplot 0.3.2

Choose a tag to compare

@github-actions github-actions released this 05 Oct 23:29

Fixes

  • The treemap moves continuously while a scan runs: updates arrive more often and each block keeps moving until the next one, instead of pausing in between.
  • The treemap opens two levels of folders by default.

Correções

  • O treemap se move de forma contínua durante o scan: as atualizações chegam mais seguido e cada bloco continua em movimento até a próxima, em vez de parar entre uma e outra.
  • O treemap abre dois níveis de pastas por padrão.

Diskplot 0.3.1

Choose a tag to compare

@github-actions github-actions released this 05 Oct 21:42

Fixes

  • The treemap now animates block by block. While a scan runs, in live mode and after a paste or a removal, each block grows or shrinks to its new size, and a new one grows from nothing in its place, instead of the whole drawing fading over.
  • The bar between the tree and the scan panel is the same quiet one that separates the treemap from the tree.

Correções

  • O treemap agora anima bloco por bloco. Durante o scan, no modo ao vivo e depois de colar ou remover, cada bloco cresce ou encolhe até o tamanho novo, e um bloco novo cresce do zero no lugar dele, em vez de o desenho inteiro se dissolver.
  • A barra entre a árvore e o painel do scan é a mesma barra discreta que separa o treemap da árvore.

Diskplot 0.3.0

Choose a tag to compare

@github-actions github-actions released this 05 Oct 21:36

New

  • Live: a switch in the tool row keeps a finished scan in step with the disk. New, changed and removed files show up on the treemap within a second or two, without scanning again. Switching it off saves the current state to the history.
  • The scan's counters now sit in a panel under the tree while the scan runs. It can be closed and reopened from the scan bar, and it goes away when the scan ends.
  • The treemap dissolves from the old drawing into the new one whenever its numbers change: while a scan fills in, in live mode, and after a paste or a removal.
  • Items that have just arrived are outlined on the treemap and flash in the tree.

Linux and macOS builds remain experimental.

Novidades

  • Ao vivo: um botão na barra mantém um scan terminado em dia com o disco. Arquivos novos, alterados e removidos aparecem no treemap em um ou dois segundos, sem escanear de novo. Ao desligar, o estado atual é salvo no histórico.
  • Os contadores do scan agora ficam em um painel embaixo da árvore enquanto o scan roda. Dá para fechar e reabrir pela barra do scan, e ele some quando o scan termina.
  • O treemap se dissolve do desenho antigo para o novo sempre que os números mudam: enquanto o scan preenche, no modo ao vivo e depois de colar ou remover.
  • Itens que acabaram de chegar ganham um contorno no treemap e piscam na árvore.

As versões para Linux e macOS continuam experimentais.

Diskplot 0.2.0

Choose a tag to compare

@github-actions github-actions released this 05 Oct 21:12

New

  • Several windows: each window holds one scan. The Window menu opens new ones and places them side by side, stacked or in cascade.
  • Copy, cut and paste files and folders inside a finished scan (Ctrl+C, Ctrl+X, Ctrl+V). The treemap updates without a new scan, and a large paste shows its progress.
  • Properties for any item, from the right click menu or Alt+Enter.
  • A list of keyboard shortcuts, under Help or F1.
  • Stopping a scan keeps what was measured on screen instead of going back to the drive list.
  • Back, Forward and Up are available while a scan is still running.
  • Clutter: groups collapse with a click, a whole group can go to the Recycle Bin at once, and items can be ordered by size, name or date.
  • A switch between light and dark in the title bar. Light is now the default.
  • The name is set as a wordmark, DISK over PLOT.

Fixes

  • The menu bar closes on a second click, on Escape and on a click outside. Alt moves onto it, the arrows walk it, and Alt with a letter opens a menu.
  • Escape with a menu open no longer cancels the scan.
  • The zoom animation is smoother and no longer ends on a jump.
  • The treemap opens three levels of folders by default.

Linux and macOS builds remain experimental.

Novidades

  • Várias janelas: cada janela guarda um scan. O menu Janela abre novas e as coloca lado a lado, empilhadas ou em cascata.
  • Copiar, recortar e colar arquivos e pastas dentro de um scan terminado (Ctrl+C, Ctrl+X, Ctrl+V). O treemap se atualiza sem escanear de novo, e uma colagem grande mostra o progresso.
  • Propriedades de qualquer item, pelo botão direito ou Alt+Enter.
  • Lista de atalhos de teclado, em Ajuda ou F1.
  • Parar um scan mantém na tela o que já foi medido, em vez de voltar para a lista de unidades.
  • Voltar, Avançar e Subir funcionam enquanto o scan ainda está rodando.
  • Limpeza (antes "Tralha"): os grupos recolhem com um clique, um grupo inteiro pode ir para a Lixeira de uma vez, e os itens podem ser ordenados por tamanho, nome ou data.
  • Um botão para alternar entre claro e escuro na barra de título. O claro agora é o padrão.
  • O nome ganhou um logotipo, DISK sobre PLOT.

Correções

  • A barra de menus fecha no segundo clique, no Esc e ao clicar fora. Alt entra nela, as setas navegam, e Alt com uma letra abre um menu.
  • Esc com um menu aberto não cancela mais o scan.
  • A animação de zoom está mais fluida e não termina mais com um salto.
  • O treemap abre três níveis de pastas por padrão.

As versões para Linux e macOS continuam experimentais.

Diskplot 0.1.0

Choose a tag to compare

@github-actions github-actions released this 05 Oct 17:49

First public version of Diskplot.

New

  • Scan a drive or a folder and see the result as a treemap and a sortable tree in one window, with selection shared between the two.
  • The treemap and the tree fill in while the scan runs.
  • Sizes are the space allocated on disk, so compressed, sparse and online-only cloud files count for what they occupy.
  • Changes: scan the same location again later to see what grew, what is new and what is gone.
  • Clutter: node_modules, build output, package caches, virtual environments, temp folders and browser caches, recognised and totalled.
  • Search by name across the whole scan, with filters by size, age and file type.
  • Duplicate files, compared by content on request.
  • Folder level limit on the treemap (four by default), with Back and Forward navigation.
  • Send to Recycle Bin with confirmation, Show in Explorer and Copy path.
  • Two themes, Grid and Paper, each in light and dark.
  • English and Brazilian Portuguese.

Linux and macOS builds are experimental and have not been tested.

Primeira versão pública do Diskplot.

Novidades

  • Escaneie uma unidade ou uma pasta e veja o resultado em um treemap e em uma árvore ordenável na mesma janela, com a seleção compartilhada entre os dois.
  • O treemap e a árvore vão sendo preenchidos enquanto o scan roda.
  • Os tamanhos são o espaço alocado no disco, então arquivos compactados, esparsos e de nuvem que estão só online contam pelo que ocupam.
  • Mudanças: escaneie o mesmo local de novo mais tarde para ver o que cresceu, o que é novo e o que sumiu.
  • Tralha: node_modules, saída de build, caches de pacotes, ambientes virtuais, pastas temporárias e caches de navegador, reconhecidos e somados.
  • Busca por nome no scan inteiro, com filtros por tamanho, idade e tipo de arquivo.
  • Arquivos duplicados, comparados pelo conteúdo quando você pedir.
  • Limite de níveis de pasta no treemap (quatro por padrão), com navegação de voltar e avançar.
  • Envio para a Lixeira com confirmação, Mostrar no Explorer e Copiar caminho.
  • Dois temas, Grade e Papel, cada um em claro e escuro.
  • Inglês e português do Brasil.

As versões para Linux e macOS são experimentais e não foram testadas.