Will this work for Inkbird ITC-308 wifi and IHC-200 wifi?

[potsfarm]

I have trouble showing my Inkbird IHC-200 with the standard tuya integration. So I hope this maybe fix this issue? Would like to hear if I could speed up the process for those exact devices!
Thx for the great work!

[ultratoto14]

For the moment, I didn't ear anyone using that with the component. Check that page, try to get the DPS dumps and post them here, but it should be possible to support it.

[Phileep]

I am using localtuya for an inkbird 308 wifi temperature controller.

I have a sensor on DP104 for the measured temperature and another sensor on DP106 showing the set temperature (sensor only, not changing set temp). Both have scaling of 0.1 for the temperature (I am using Celcius)

With the latest version of localtuya (3.2?) I can also change the set temp using a call to the new localtuya.set_dp service

Hope this helps

Phil

[kramttocs]

It would be great if this worked natively. Can I just get the DPs from the Tuya iot site and provide them here?
Would this still rely on the Climate feature being added though?

[kramttocs]

Taken from a post in tuyalocal repo:

101 | Temperature unit | Cf | Integer | 0=C, 1=F
102 | Calibration | Ca | Integer | Unit is 0.1C
104 | Temperature sensor | | Integer | Unit is 0.1C
106 | Temperature set point | Ts | Integer | Unit is 0.1C
108 | Compressor delay time | Pt | Integer | Unit is minutes
109 | Alarm high temperature | Ah | Integer | Unit is 0.1C
110 | Alarm low temperature | Al | Integer | Unit is 0.1C, For negative values use -(0xFFFFFFFF - value)
115 | Relay status | | Integer | 01=cool, 02=off, 03=heating
116 | Temperature sensor | | Integer | Unit is 0.1F
117 | Heating differential value | Hd | Integer | Unit is 0.1C
118 | Cooling differential value | Cd | Integer | Unit is 0.1C

Device matches None with quality of 0%. DPS: {'12': 0, '101': 'C', '102': 0, '104': 136, '106': 15, '108': 3, '109': 370, '110': 10, '111': False, '112': False, '113': False, '115': '1', '116': 565, '117': 10, '118': 5, 'updated_at': 1642564828.9707937}

[hitchin999]

Any update on this? I'm trying to get when it's heating or cooling. The DP dump is up here

[galentx]

Thank you, @kramttocs for posting the DP mapping. That helped me tremendously. To return the favor, I have determined the function of a few more DP addresses:

12 | Fault | | Integer | 0=normal, 1=high temperature alarm, 2=low temperature alarm
111 | High temperature alarm | | Boolean | False=no alarm, True=alarm active
112 | Low temperature alarm | | Boolean | False=no alarm, True=alarm active

113 also reports a Boolean value, but I have not determined what it signifies. It is always False

I've been using the LocalTuya 2.0 integration with some success (https://github.com/Bildass/localtuya/)