MX3

Light saber version 3 based on mbed-os and c++

How to use

prepare

need install mbed-cli first.

install

mbed deploy
# set toolchain u used
mbed config toolchain gcc_arm

export to IDE

# check supported ide
mbed export -S
# export specific ide like:qtcreator
mbed export -i qtcreator

debug with openocd and arm-none-eabi-gdb

## Shell 1 run:
openocd -f ./openocd_jlink.cfg

## Shell 2 run:
arm-none-eabi-gdb-py xxx.elf -x gdb_load.sh

## download elf to board(in shell 2)
load

note

Debug Issues

• When debug should enable stm32 sepicific function.

  HAL_DBGMCU_EnableDBGSleepMode();
  HAL_DBGMCU_EnableDBGStandbyMode();
  HAL_DBGMCU_EnableDBGStopMode();