Help Wiring

Signal helping wiring

This function allows turning on the LED of the Hardsploit pin corresponding to the interface entered as a parameter.

Usage:

HardsploitAPI().signal_helping_wiring(signal_number_or_name)

Signals name

Module	Signals name
SPI	CS | SPI_CLK | MOSI | MISO
I2C	I2C_CLK | SDA | MOSI | MISO
UART	TX | RX
SWD	SWD_CLK | SWD_IO

Examples:

HardsploitAPI().signal_helping_wiring("A0")
HardsploitAPI().signal_helping_wiring("A1")
HardsploitAPI().signal_helping_wiring("A2")
...
HardsploitAPI().signal_helping_wiring("A31")

HardsploitAPI().signal_helping_wiring("D0")
HardsploitAPI().signal_helping_wiring("D1")
...
HardsploitAPI().signal_helping_wiring("D15")

HardsploitAPI().signal_helping_wiring("RX")
HardsploitAPI().signal_helping_wiring("MOSI")
...

Set custom value wiring LED

This function allows turning on/off LEDs on the Hardsploit pin.

Usage:

set_wiring_leds(PortH PortG PortF PortE PortD Portc PortB PortA)

HardsploitAPI().set_wiring_leds(0xFF00FFFFFF00FFFF)

All LEDs on each port are:

Port	Leds
A	ON
B	ON
C	OFF
D	ON
E	ON
F	ON
G	OFF
H	ON