Skip to content

v3.22

Latest

Choose a tag to compare

@sqlCRT sqlCRT released this 23 Oct 18:32
f7e36e1

v3.22 — 2026-09-19

中文

  • 新增:新增 Xbox 360 模式:可在配置页切换为 Xbox 手柄模式,兼容所有 XInput 游戏(Windows / Linux / Steam)
  • 新增:Xbox 模式下支持扬声器、耳机、麦克风音频功能
  • 新增:Xbox 模式下支持两种震动方案:标准震动和 HD 触觉震动(将震动信号转为 DualSense LRA 正弦波驱动),可在配置页切换
  • 新增:Xbox 模式下 Xbox 360 LED 指示灯自动映射为 DualSense 玩家指示灯
  • 新增:新增 Create + Options 长按 3 秒快速切换 Xbox 与进入前选择的 DS5、DSE 或自动模式(带震动和灯光反馈,切换后自动重启)
  • 新增:组合按键检测窗口时间可在配置页自定义调整
  • 变更:已配对手柄时不再主动扫描,仅等待手柄发起重连,大幅减少重连时因扫描冲突导致的连接失败
  • 修复:修复蓝牙 Scan 状态缓存不一致导致连接后数据传输速率下降的问题
  • 新增:调整默认配置:750Hz 回报率、音频缓冲长度 56、触觉增益 1、耳机音量偏移 75、扬声器增益 2;默认启用闲置省电、1 分钟熄灯、PS 唤醒主机、扩展键盘和 Xbox HD 震动;USB 隐身模式默认关闭
  • 变更:优化 Xbox 与自动模式切换:会保留用户原先选择的控制器协议,从 Xbox 模式返回后可正确恢复指定 DS5、指定 DSE 或自动检测
  • 变更:配置页的控制器协议状态更清晰,可区分自动检测结果、用户指定协议,以及 Xbox 模式返回时将恢复的协议
  • 修复:优化固件更新、恢复默认设置及切换输出模式后的完整复位与蓝牙重连流程,降低偶发重启后手柄无法重新连接的概率
  • 变更:统一配置网页的中英文字体与字号层级,改善 Windows 下按钮、状态标签、侧栏和更新日志等区域的可读性

English

  • New: New Xbox 360 mode: switch to Xbox controller mode in settings, compatible with all XInput games (Windows / Linux / Steam)
  • New: Speaker, headphone, and microphone audio support in Xbox mode
  • New: Two vibration modes in Xbox mode: standard rumble and HD haptic (converts rumble signals to DualSense LRA sine-wave drive), switchable in settings
  • New: Xbox 360 LED patterns automatically mapped to DualSense player indicator LEDs
  • New: New Create + Options hold 3s combo to toggle Xbox and the DS5, DSE, or Auto mode selected before Xbox (with vibration and LED feedback, auto-restart after switch)
  • New: Combo key detection window is now user-adjustable in settings
  • Chg: Disabled active scanning (Inquiry) when a controller is already paired — only passive page scan is used, greatly reducing reconnection failures caused by scan conflicts
  • Fix: Fixed Bluetooth scan state cache inconsistency that caused degraded data transfer rates after connection
  • New: Updated defaults: 750Hz polling, audio buffer length 56, haptic gain 1, headphone volume offset 75, and speaker gain 2; idle power saving, 1-minute LED timeout, PS wake, extended keyboard shortcuts, and Xbox HD haptics are enabled by default; USB stealth mode is disabled by default
  • Chg: Improved Xbox/Auto switching: the selected controller protocol is preserved and restored correctly when returning from Xbox mode, including forced DS5, forced DSE, or Auto detection
  • Chg: Controller protocol status is clearer in the configuration page, distinguishing Auto detection, user-selected protocols, and the protocol that will be restored after leaving Xbox mode
  • Fix: Improved full-reset and Bluetooth reconnection handling after firmware updates, restoring defaults, and switching output modes, reducing rare cases where a controller could not reconnect after reboot
  • Chg: Unified Chinese and Latin typography and sizing across the configuration page, improving readability of buttons, status tags, the sidebar, and changelog on Windows