t-flppr-fw-089-039

t-flppr-fw-089-039

Stable Tumoflip release based on Unleashed 089. Report regressions in Issues.

Stable revision

• Desktop now keeps a bounded compressed animation preview while returning from
  external FAPs and aligns the handoff to the full animation loaded from SD.
• The preview cache is limited to 4 KiB and does not retain the full wallpaper
  while an external app is running.
• No public API changes; firmware API remains 88.0.

Automated release assets

This release was built by the release workflow from tag v0.3.9 at commit
6840f8069518d23db700e1ca0715f767686f15da. The workflow ran the firmware
build, release tests, validate_release.py --write-manifest, and published the
firmware plus SD package assets from the same build.

Package manifest

• firmware version: t-flppr-fw-089-039
• firmware API: 88.0
• release ID: 25333fe3c9353ca9fc316ac1b89d7935e57543ec11bec4981d4b221a8e258898
• package groups: arf=13, base=7, module_one=34, protocol_packs=30
• cleanup entries: 30

Safety checks

• C2 section gap: 29040 bytes
• updater: 119221 / 131072 bytes
• PR CI reported no public API changes
• release workflow completed build, tests, validation, and publishing

Hardware validation

• targeted Desktop resume code was accepted on t-dev-089-039-002: returning
  from AI Radar resumes the wallpaper with only a short acceptable load delay
  and without the repeated-frame jerk
• the exact stable artifact is staged for manual installation; post-install
  identity and splash confirmation are pending
• the broader hardware checklist remains unchanged in
  docs/hardware-regression-checklist.md

Before flashing, back up /int and important SD files.
tumoflip-packages.zip is for TumoCompanion SD package installation; firmware
is installed separately through the standard updater package.

t-flppr-fw-089-037 NFC fix

t-flppr-fw-089-037

NFC fix

• Restores supported-card parsing for MIFARE Plus 2K transit cards operating in SL1.
• Covers Plantain, Troika, SevPPK, SZPPK and Two Cities.
• Keeps firmware identity t-flppr-fw-089-037 and API 88.0 unchanged.
• Hardware validation with a matching Plus 2K SL1 card remains pending.

Stable Tumoflip release based on Unleashed 089. Report regressions in Issues.

Automated release assets

This release was built by the release workflow from the tagged source. The workflow ran the firmware build, release tests, validate_release.py --write-manifest, and published the firmware plus SD package assets from the same build.

Package manifest

• firmware version: t-flppr-fw-089-037
• firmware API: 88.0
• release ID: 22b8d8b37c89b4ab8567730edcae6f495acf7d6333d7472b73b5689882c4464e
• package groups: arf=13, base=7, module_one=34, protocol_packs=30
• cleanup entries: 30

Safety checks

• C2 section gap: 31720 bytes
• updater: 119229 / 131072 bytes

Hardware validation

• status: not run by CI
• checklist: docs/hardware-regression-checklist.md
• cases run by CI: none
• unverified until manual testing: RF, external CC1101, Protocol Pack runtime behavior, hopping, ARF FAP launch/exit, BLE App Bridge, NFC tags, sleep/wake, repeated app launch

CI must not mark hardware-only checks as passed. Update these release notes after executing the hardware checklist on a physical Flipper Zero for this exact commit.

Before flashing, back up /int and important SD files. tumoflip-packages.zip is for Unleashed Companion SD package installation; firmware is installed separately through the standard updater package.

t-flppr-fw-089-037

t-flppr-fw-089-037

Stable Tumoflip release based on Unleashed 089. Report regressions in Issues.

Automated release assets

This release was built by the release workflow from the tagged source. The workflow ran the firmware build, release tests, validate_release.py --write-manifest, and published the firmware plus SD package assets from the same build.

Package manifest

• firmware version: t-flppr-fw-089-037
• firmware API: 88.0
• release ID: 0e35821372b4ff227d22eb883de594dbe72a396b680fff57982de920e6500c11
• package groups: arf=13, base=7, module_one=34, protocol_packs=30
• cleanup entries: 30

Safety checks

• C2 section gap: 31728 bytes
• updater: 119221 / 131072 bytes

Hardware validation

• status: not run by CI
• checklist: docs/hardware-regression-checklist.md
• cases run by CI: none
• unverified until manual testing: RF, external CC1101, Protocol Pack runtime behavior, hopping, ARF FAP launch/exit, BLE App Bridge, NFC tags, sleep/wake, repeated app launch

CI must not mark hardware-only checks as passed. Update these release notes after executing the hardware checklist on a physical Flipper Zero for this exact commit.

Before flashing, back up /int and important SD files. tumoflip-packages.zip is for Unleashed Companion SD package installation; firmware is installed separately through the standard updater package.

t-dev-089-037-058

Final dev-037 release candidate

This build rolls the accepted TumoSurvey RSSI Locator and layout fixes into a clean release candidate before stable 037 promotion.

Included

• RSSI Locator uses the Module One 1.13.0-compatible scan-all workflow;
• TumoSurvey About metadata matches the installed application version;
• TumoSurvey views keep content and action buttons separated on the Flipper display;
• complete API 88.0 firmware and FW Packages bundle.

Validation

• source commit: e213f38d0;
• installed device metadata: t-dev-089-037-058, dirty=false, API 88.0;
• 63 release tests passed locally;
• PR and dev branch CI passed;
• updater/package validator passed;
• C2 section gap: 31,716 bytes;
• packaged WiFi Mapper SHA-256 matches the FAP installed by the updater;
• RSSI Locator hardware acceptance completed.

Notes

The firmware updater installs flash and resource content. Install FW Packages through Unleashed Companion as a separate transaction to refresh /ext/.tumoflip/package-state.txt and record rollback metadata.

This remains a prerelease. Stable v0.3.7 requires the final stable branding/package promotion and a stable hardware smoke.

t-dev-089-037-057

TumoSpectrum Phase B

This dev build turns the capture-set workflow into a practical signal research path.

Added

• bounded candidate decode for up to 96 bits from pulse-pair, PWM and PPM timing families;
• stable, changing and unknown bit-field maps across 3-4 RAW captures;
• exact increment/decrement counter candidates;
• bounded XOR-8, SUM-8, CRC-8/0x07 and CRC-8/0x31 candidates;
• backward-compatible capture-set profiles and enriched schema-2 reports;
• explicit stock Sub-GHz/Infrared handoff for Static-like source captures only.

Safety

• TumoSpectrum never transmits directly;
• no brute force or rolling-code bypass;
• inferred fields remain labeled candidates.

Validation

• clean source commit: bb0cdf6;
• firmware API: 88.0;
• updater/package validator passed;
• C2 section gap: 31,732 bytes;
• firmware host tests: 12 passed;
• Companion schema tests: 11 passed;
• hardware acceptance: pending.

Companion 1.6.22 adds the candidate bit-field visualization. Back up important files before installing this experimental build.

t-dev-089-037-056

TumoSpectrum 2.0

• opens the stock Sub-GHz RAW and Infrared RAW capture flows directly and returns to TumoSpectrum after exit
• adds bounded capture sets with 3-4 distinct RAW recordings
• estimates timing clusters, encoding candidates, and static-like versus changing behavior
• stores schema-2 JSON reports for Unleashed Companion 1.6.21 charts
• preserves existing schema-1 reports, app identity, saved files, and read-only safety boundaries

Release checks

• exact source: d70e7a45d
• metadata: BUILD_DIRTY 0
• firmware API: 88.0
• C2 gap: 31732 bytes
• updater: 119241 bytes
• full F7 build, APPCHK, 23 focused tests, and release validator passed

Hardware acceptance

Not yet complete. Validate stock RAW capture handoff/return, a real 3-sample set, report transfer to Companion 1.6.21, and all Back paths before closing issue #123.

Back up important SD data before updating. tumoflip-packages.zip is the SD package for Companion; firmware uses the updater archive.

t-dev-089-037-055

TumoSurvey Inspector

This dev build turns the existing TumoSurvey workflow into a repeatable site-inspection tool. A completed session can be pinned as a baseline, later sessions show exact bounded New/Gone/Changed AP entries by BSSID, and a selected current AP can be located with passive live RSSI, peak signal, and warmer/colder trend.

Compatibility and safety

• firmware API: 88.0
• preserves appid=wifi_mapper, existing CSV/GeoJSON paths, standard scan modes, and Companion live relay
• uses only passive Module One scanap/stopscan; no deauth, injection, or credential capture
• bounded to 32 APs per snapshot and explicitly reports partial comparisons
• invalid or AP-empty sessions cannot be pinned

Automated checks

• focused TumoSurvey tests: 9/9
• FAP APPCHK: passed
• compact updater build: passed
• release validator: C2 gap 31,852 bytes; updater 119,241 bytes; API 88.0
• package release ID: f7f986e515e40bdd36e7180c4c3f98446a7d7c13d7cd01adc4983a4532472902
• package groups: arf=13, base=7, module_one=34, protocol_packs=30

Hardware validation

Status: not yet run for this exact build. Required checks are tracked in issue #120: baseline persistence, exact AP comparison, selected-BSSID Locator, repeated Start/Stop/Back, ordinary scan modes, and Companion live relay.

Back up important /int and SD data before flashing.

t-dev-089-037-054

Changes

• Polished ARF Frequency Analyzer history: empty slots no longer repeat MHz.
• Removed the overlapping feedback-mode glyph while retaining feedback behavior.
• Preserved Preset Scan and the direct Scan -> RX handoff introduced in 053.
• Hardened the release drift gate so ARF Preset Scan remains an explicit profile extension while notebook storage stays shared with core Sub-GHz.

Validation

• Firmware API 88.0
• Branch dev, commit 228a532, dirty=false
• 19 focused tests and all 63 release tests passed
• F7 CI and updater validation passed
• C2 section gap: 31,852 bytes
• Package release ID: e65b557945e8df09b2e6d423b5f041a93f42b5fd3bc8e026227d3bc5aef72a93

This is an experimental dev build. Hardware acceptance is limited to the ARF Frequency Analyzer workflow tracked in issue #116.

t-dev-089-037-053

Changes

• Added receive-only Preset Scan to ARF Frequency Analyzer.
• Added ranked modulation preset results and direct handoff to the system Sub-GHz Receiver.
• Fixed Scan -> RX being parsed as a .sub file (cannot parse file).

Validation

• Firmware API 88.0
• Branch dev, commit 22cdf5d3, dirty=false
• 34 focused tests passed
• F7 CI and release validation passed
• C2 gap: 31,852 bytes

This is an experimental dev build. Hardware acceptance for issue #116 remains open.

t-dev-089-037-052

TumoSpectrum Compare UI

Makes RAW capture comparison visible and directly actionable in TumoSpectrum. The final RAW analysis page now shows a real Compare soft button that opens the second-capture picker. Decoded captures no longer expose a misleading comparison page because decoded key files do not contain source timing data.

Validation

• exact source: b50ec360 on dev
• firmware API: 88.0
• focused TumoSpectrum/splash/version tests: 26/26
• Tumoflip tests: 320/320
• C2 section gap: 32,004 bytes
• updater: 119,217 / 131,072 bytes
• FAP build, APPCHK, package archive and checksums passed
• full updater contains splash.bin, resources.ths, radio and firmware payloads

Hardware status

The TumoSpectrum 1.0.2 FAP was installed successfully. Exact clean firmware 037-052, its full-update splash, and the direct Compare flow require final device acceptance after installation.

Back up important /int and SD files before flashing. This is an experimental dev prerelease.