Configuration

Production

Pin 12 is currently used for the spare 20-key keypad wire.

log_level = "INFO"

[arduino]
core = "arduino:renesas_uno"
version = "1.2.0"
board = "minima"
port = "/dev/ttyACM0"

[keypad]
row_pins = [3, 2, 14, 15, 16]
column_pins = [12, 19, 18, 17]

# TODO not yet implemented
driver = "digital"  # "digital" | "analog"

[motor]
steps_per_revolution = 2048
driver = "driver"
pins = [9, 8, 0, 0]

[display]
controller = "PCD8544"  # "PCD8544" | "SSD1306"
buffer_mode = "1Page"  # "1Page" | "2Page" | "Full"
clock = 13
data = 11
cs = 6
dc = 4
reset = 5
backlight = 7

Fritz's dev board

log_level = "INFO"

[arduino]
core = "arduino:renesas_uno"
version = "1.2.0"
board = "minima"
port = "/dev/ttyACM0"

[keypad]
row_pins = [3, 2, 14, 15]
column_pins = [16, 17, 18, 19]
# TODO not yet implemented
driver = "digital"  # "digital" | "analog"

[motor]
steps_per_revolution = 1024
driver = "full4wire"
pins = [8, 10, 9, 12]

[display]
controller = "PCD8544"  # "PCD8544" | "SSD1306"
buffer_mode = "1Page"  # "1Page" | "2Page" | "Full"
clock = 13
data = 11
cs = 6
dc = 4
reset = 5
backlight = 7