Revise memory specs for lemp13 model - #423
Conversation
Add `dmidecode` memory type from 5600 MHz version memory. Remove dead link to Samsung memory -- Samsung doesn't seem to have dedicated links for memory specs now. Add firmware model names to firmware section
| - [XMC XM25QU256C](https://www.xmcwh.com/en/site/product_con/224) flash chip | ||
| - WSON-8 form factor | ||
| - Programmed with [System76 Open Firmware](https://github.com/system76/firmware-open) | ||
| - `lemp13` or `lemp13-b` depending on keyboard |
There was a problem hiding this comment.
This wasn't where it went in #417, and I don't think it's where it should go here.
We already list the keyboard distinction (with pictures) at https://system76.com/tech-docs/models/lemp13/external-overview#keyboard--touchpad. Is that not sufficient? We can also add lemp13-b to the page header like I did in that other PR.
| - 4x [Samsung K4RAH165VB-BCQK](https://semiconductor.samsung.com/dram/ddr/ddr5/k4rah165vb-bcqk/) (2GB each) | ||
| - Channel 1: 8-GB/16-GB/32-GB/48-GB DDR5 SO-DIMM @ 4800 MHz | ||
| - 4x Samsung K4RAH165VB-BCQK (2GB each) or | ||
| - 4x Samsung M425R1GB4PB0-CWMOD (2GB each) |
There was a problem hiding this comment.
We should list the speeds with these two part numbers to distinguish them since that's the important difference.
It looks like the 5600MHz RAM was only offered in the lemp13-b (but not all lemp13-b units, only ones after July 2024)? @leviport does that sound right? If so, I would add the date (and model) info to the RAM section so people can have a chance at figuring out which RAM is in their unit based on that.
2 participants
Add
dmidecodememory type from 5600 MHz version memory. Remove dead link to Samsung memory -- Samsung doesn't seem to have dedicated links for memory specs now.Add firmware model names to firmware section