cool650lp is 50% keyboard.
cool650lp use Low profile keyswitches and keycaps.
cool650lp use seeed RP2040-Zero,run qmk_firmware.
cool650lp change keymap by vial.
https://github.com/telzo2000/cool650lp/blob/main/buildguide_for_cool650lp.md
Main steps
1 Soldering switchsocket.
2 Soldering RP2040-Zero.
3 Insert the switch socket into the top plate and then the PCB.
4 Insert the bottom case.
5 Insert the screw from above and secure it with the nut on the bottom case side.
6 Connect to your PC with a USB cable and install the firmware by dragging and dropping.
common parts
| No. | Patrs | Quantity | remarks | Suppliers | Cost |
|---|---|---|---|---|---|
| 番号 | 名前 | 数 | 備考 | 調達先 | 参考価格（送料込） |
| 1 | PCB | 1 | JLCPCB | ||
| 2 | Top plate | 2 | 3D Print | ||
| 3 | Bottom case | 2 | 3D Print | ||
| 4 | Diode ダイオード |
50 | SMD、PCBA済み | 遊舎工房 Talp Keyboard Daily Craft Keyboard等 |
100個で220円程度から |
| 5 | Swith socket スイッチソケット |
50 | choc | 遊舎工房 Talp Keyboard Daily Craft Keyboard等 |
10個で165円程度 |
| 6 | RP2040-Zero | 1 | MCU Board | Talp keyboardWaveshare | 400円ぐらい |
| 7 | Screw ネジ |
8 | スリムヘッドM2 6mm | 遊舎工房 | 50本880円(遊舎工房) |
| 8 | Nut ナット |
8 | M2ネジに付属していることが多い | DIY shop | |
| 9 | Keycap キーキャップ |
50 | ロープロが最適 | 遊舎工房 Talp Keyboard Daily Craft Keyboard |
In addition, USB cable, etc. are required.
この他に、USBケーブル等が必要です。
