Skip to content

General Description and Operation

David Anderson edited this page Dec 20, 2023 · 1 revision

This new interface was developed for the Timex Sinclair 2068 computer. It is a user-extensible interface to the Raspberry Pi Pico and a digital file storage solution.

Programmed in MicroPython, the TS Pico allows you to save and load programs from TAP files on an SD card. It features 512k of Flash memory, some of which holds its advanced operating system and some of which is available to you, as well as 512K of static RAM, all of which is available to you.

The TS Pico is difficult, but not impossible, to break. We do not recommend to making electronic or programming modifications if you do not have sufficient technical knowledge. It is possible to cause irreparable damage to the interface or to your computer.

The TS Pico extends standard BASIC SAVE, LOAD, VERIFY and MERGE commands. The commands start with tpi: and they are only interpreted as extended commands if the TS Pico is connected and operational to the TS-2068.

What are TAP Files?

TAP files are the digital equivalent of a cassette tape. Like cassette tapes, they can hold one or more individual files. The advantage of the TAP file format is that it behaves exactly like a tape, so programs written for use with a cassette tape will behave as expected.

Frogger, for instance, is actually several files on a cassette tape: a loader, a screen file that displays while the actual program loads. The Frogger TAP file contains all three of those programs.

Clone this wiki locally