POP32 Demo Serial Test V.1.3

POP32 or POP32i Demo Serial Test V1.3

---

How to use
0. Make sure your POP32 or POP32i is running on the demo program.

1. Download and Extract the ZIP File.
2. Run pop32_serial_test.bat.
3. Connect your POP32 or POP32i (INEX Production) via HID USB to Computer USB.
4. Press any key (SW_OK or SW_A or SW_B) on POP32 or POP32i to run demo.
5. The text displayed on the Command Prompt shows your port is connected and then shows its adc of GPIOs.

---

Protocol

*COM [Number] - [A0, A1, A2, A3, A4, A5, A6, A7, A8, RX, CHAR]

• A0 - Analog 0 [GPIO0][PA0]
• A1 - Analog 1 [GPIO1][PA1]
• A2 - Analog 2 [GPIO2][PA2]
• A3 - Analog 3 [GPIO3][PA3]
• A4 - Analog 4 [GPIO4][PA4]
• A5 - Analog 5 [GPIO5][PA5]
• A6 - Analog 6 [GPIO6][PA6]
• A7 - Analog 7 [GPIO7][PA7]
• A8 - Analog 8 [GPIO8][PB0]
• RX - Check TX and RX UART (near HID USB Port)
  • RX = 0 means the TX Data has not been found.
  • RX = 1 means the TX Data has been found.
• *CHAR means show character when RX = 1.

POP32 Demo Serial Test v.1.2.2

POP32 or POP32i Demo Serial Test V1.2.2

---

How to use
0. Make sure your POP32 or POP32i is running on the demo program.

1. Download and Extract the ZIP File.
2. Run pop32_serial_test.bat.
3. Connect your POP32 or POP32i (INEX Production) via HID USB to Computer USB.
4. Press any key (SW_OK or SW_A or SW_B) on POP32 or POP32i to run demo.
5. The text displayed on the Command Prompt shows your port is connected and then shows its adc of GPIOs.

---

Protocol

*COM [Number] - [A0, A1, A2, A3, A4, A5, A6, A7, A8, RX, CHAR]

• A0 - Analog 0 [GPIO0][PA0]
• A1 - Analog 1 [GPIO1][PA1]
• A2 - Analog 2 [GPIO2][PA2]
• A3 - Analog 3 [GPIO3][PA3]
• A4 - Analog 4 [GPIO4][PA4]
• A5 - Analog 5 [GPIO5][PA5]
• A6 - Analog 6 [GPIO6][PA6]
• A7 - Analog 7 [GPIO7][PA7]
• A8 - Analog 8 [GPIO8][PB0]
• RX - Check TX and RX UART (near HID USB Port)
  • RX = 0 means the TX Data has not been found.
  • RX = 1 means the TX Data has been found.
• *CHAR means show character when RX = 1.