IoT Plug and Play bridge

Example programs MSP430F5529

os.py - Python library to read and manipulate machine information 💻

minimalistic peripheral access library for the Raspberry Pi

STM32F1 devices minimal library

This repository is deprecated. Use the ModusToolbox™ example available here - https://github.com/Infineon/mtb-example-usb-device-audio-freertos. This example demonstrates how to use PSoC 6 MCU to implement a USB Audio Device and HID Consumer Control that connects to the PC via the USB interface. The example also uses FreeRTOS.

A very simple C library to handle the peripherals of the BeagleBone Black (and Wireless) board -- GPIO - I2C - SPI - etc. Inspired by Raspberry's WiringPi library

This code example works with the 6EDL7141 1 Shunt trapezoidal Hall sensor project in the Battery Powered Application (BPA) Motor Control tool.

Computer Architecture II (University of Aveiro)

This code example encrypts and decrypts user input data using the AES algorithm using a 128-bit key. The encrypted and decrypted data are displayed on a UART terminal emulator.

This example demonstrates how to use Infineon MCU devices to implement a USB audio device and HID audio playback control that connects to the PC via the USB interface. The example uses FreeRTOS.

This code example demonstrates how to erase a sector of the flash, write data to the sector and check the data for correctness on the XMC MCU device.

The ISE Design Suite: Embedded Edition includes Xilinx Platform Studio (XPS), Software Development Kit (SDK), large repository of plug and play IP including MicroBlaze™ Soft Processor and peripherals, and a complete RTL to bit stream design flow. Embedded Edition provides the fundamental tools, technologies and familiar design flow to achieve op…

Deprecated. Use https://github.com/Infineon/mtb-example-usb-device-hid-generic. This example demonstrates how to configure the USB block in a PSoC 6 MCU as a Human Interface Device (HID). The device enumerates as a Generic HID device.

This code example works MOTIX™ 6EDL7141 3-shunt FOC sensorless and MOTIX™ IMD700A 3-shunt FOC.

mtb-example-usb-device-cdc-echo

This example demonstrates how to use QSPI in execute-in-place (XIP) mode with external flash memory on the PSoC 6 MCU using ModusToolbox IDE.

This example demonstrates how to use the I2S hardware block in PSoC 6 MCU to interface with an audio codec.