en NSPanel

NSPanel Integration

The adapter supports direct integration with the ioBroker NSPanel Lovelace UI Adapter. When enabled, the public-transport adapter creates additional datapoints in a format that the NSPanel adapter can directly read as a timetable display.

---

Prerequisites

• ioBroker NSPanel Lovelace UI Adapter must be installed and configured
• NSPanel hardware (Sonoff NSPanel)
• The "NSPanel Channel" toggle must be enabled for the respective stop or journey

---

Enabling

The NSPanel channel is enabled individually per stop and per journey:

For stops: In the Departures configuration, enable the "NSPanel Channel" toggle.

For journeys: In the Journeys configuration, enable the "NSPanel Channel" toggle.

On the next polling cycle, NSPanel channels are created automatically.

---

Created Datapoints

Departures: nspanelDep{N}

Below each Departures_XX channel, an additional channel nspanelDep{N} with role timeTable is created. The index N corresponds to the numeric index of the departure (without leading zero: nspanelDep0, nspanelDep1, …).

Path: public-transport.0.Stations.{stationId}.Departures_00.nspanelDep0

Datapoint	Type	Description
ACTUAL	string (date)	Actual (forecasted) departure time
VEHICLE	string	Vehicle type (line.mode, e.g. train, bus)
DEPARTURE	string (date)	Planned departure time
DELAY	number	Delay in seconds
DIRECTION	string	Destination (direction)

Journeys: nspanelJourney{N}

Below each Journey_XX channel, an additional channel nspanelJourney{N} with role timeTable is created. The index N corresponds to the numeric index of the journey option (without leading zero: nspanelJourney0, nspanelJourney1, …).

Path: public-transport.0.Journeys.{journeyId}.Journey_00.nspanelJourney0

Datapoint	Type	Description
ACTUAL	string (date)	Actual departure time of the first leg
VEHICLE	string	Vehicle type of the first non-walking leg
DEPARTURE	string (date)	Planned departure time of the first leg
DELAY	number	Departure delay of the first leg in seconds
DIRECTION	string	Name of the destination stop (last leg)

---

Notes

• NSPanel channels are only created when the corresponding toggle is active for the stop/journey. If the toggle is off, no nspanelDep* or nspanelJourney* datapoints are created.
• Channels are updated on every polling cycle (not just on first run).
• The NSPanel Lovelace UI adapter reads the datapoints automatically. No further configuration in the public-transport adapter is needed once the channel is enabled.
• Full datapoint reference: Datapoints

---

Related Pages

• Departures — NSPanel toggle in stop configuration
• Journeys — NSPanel toggle in journey configuration
• Datapoints — Full datapoint structure

---

Home