v1.2.0 - Example Firmware Packages

ESP32-C5-Touch-LCD-2.8 example firmware

This release provides 22 ready-to-flash example packages built from source commit 77a7dceac38a1bd491173b3906205217a382c08c.

Framework	Version	Packages
ESP-IDF	v5.5.5	8
ESP-IDF	v6.1 (reports v6.1.0)	8
Arduino-ESP32	3.3.12	6

The main-branch CI run passed all 24 checks. All 22 packages and their 58 images were downloaded and verified before publication.

Download and flash

1. Download the ZIP for your example and framework version from Assets below, then extract it.
2. Install Python 3.10 or newer and esptool: python -m pip install "esptool>=5,<6".
3. Connect the board over USB and run python flash.py --port PORT from the extracted directory, replacing PORT with the board's serial port.
4. If needed, hold BOOT, press RESET, then release BOOT to enter download mode.

Each package includes BIN images, a source/version manifest, exact flash addresses, SHA-256 checksums, a flashing helper and English/Chinese instructions. SHA256SUMS.txt below verifies the downloaded ZIP files. The helper also checks image sizes and hashes before flashing.

SD examples need the corresponding SD card resources. The weather example requires Wi-Fi configuration in source and a rebuild. See complete package instructions.

These results cover compilation and package integrity; hardware behavior still needs testing. For factory recovery, download the existing Factory Firmware v1.1.0.

---

ESP32-C5-Touch-LCD-2.8 示例固件

本次发布提供 22 个可直接烧录的示例固件包，源码提交为 77a7dceac38a1bd491173b3906205217a382c08c。

开发框架	版本	固件包数量
ESP-IDF	v5.5.5	8
ESP-IDF	v6.1（版本输出为 v6.1.0）	8
Arduino-ESP32	3.3.12	6

main 分支 CI 已通过全部 24 项检查。发布前已下载并核对全部 22 个包及其中的 58 个镜像。

下载与烧录

1. 在下方 Assets 下载所需示例及开发框架版本对应的 ZIP，并解压。
2. 安装 Python 3.10 或更新版本及 esptool：python -m pip install "esptool>=5,<6"。
3. 通过 USB 连接开发板，在解压后的目录执行 python flash.py --port PORT，将 PORT 替换为开发板的实际串口。
4. 需要时，按住 BOOT、按下 RESET，再松开 BOOT 进入下载模式。

每个包包含 BIN 镜像、源码及版本清单、准确的烧录地址、SHA-256 校验值、烧录脚本和中英文说明。下方 SHA256SUMS.txt 可用于校验下载的 ZIP，烧录脚本还会检查镜像大小及校验值。

SD 卡示例需准备相应的 SD 资源。天气示例需在源码中配置 Wi-Fi 并重新编译。详细操作见示例固件说明。

上述验证覆盖编译和固件包完整性，实物功能仍需测试。恢复出厂演示请下载原有的出厂固件 v1.1.0。

ESP32-C5-Touch-LCD-2.8 Factory Firmware

v1.1.0

Remove Git LFS tracking