|
The ATARI Touch Tablet is an art and graphics controller designed for use with all ATARI Home Computers. You can quickly and easily create your own computer art and graphics-without writing complex programs using the AtariArtist™ software included with the Touch Tablet.
For those folks who don't have the wired-pen (stylus) of the Tablet, the following models can help to reproduce this part. |
A WORD OF APPRECIATION:
Special thanks to John Cove who kindly provided the required data. There are more cool stuffs for retroware on his web-page www.ataristsales.co.uk.
BOM:
- Cable (2 wire) - 1pcs
- Audio jack (2.5mm) - 1pcs.
- PCB (see attached schematics):
- SMD pushbutton switch - 1pcs (height ~1.6mm), see below.
- 1k SMD resistor - 1pcs.
 |
 |
|---|
NOTE:
The debouncing circuit is not required.
 |
 |
 |
 |
 |
 |
 |
|---|
- SIO Plug
| The Serial Input/Output system was a proprietary peripheral bus and related software protocol stacks used on the Atari 8-bit computers to provide most input/output duties for those computers. Printable 3D model of the most common version of MOLEX SIO plug you can download from here. |
BOM:
- Bolt + Nut (M3) - 1pcs.
 |
 |
 |
|---|