Not my map

[Instinctiv3]

I installed dynmap and its not my map thats shown =/ any help :(?

[TN-Wade]

Hi,

Did you install this on a machine with other Minecraft servers running? e.g. a server host

If so, it is most likely that someone else is running their DynMap server on the same IP and port that you are trying to bind to.

I'm not sure what you have done in your server configuration so I will assume you're using the defaults.

Try changing 0.0.0.0 in dynmap\configuration.txt to the IP of your server

The network-interface the webserver will bind to (0.0.0.0 for all interfaces, 127.0.0.1 for only local access).

webserver-bindaddress: 0.0.0.0

and 8123 to a port similar to your server port. Perhaps 25566

The TCP-port the webserver will listen on.

webserver-port: 8123

Good luck.

[mikeprimm]

Problem is 99% likely that you're on a leased box that has another bukkit server with another dynmap already on port 8123. You should be able to just change the port (messing with bindaddress is rarely necessary or useful, and often as not causes problems). Try another port number (8124, 8125) - browse to be BEFORE changing to be sure another map isn't already on the port, and then switch to it and restart.

[Instinctiv3]

yeh i fixed it now thanks :) was neededing to use another port :D thanks both :D