"Not Logged In" message

[lunar-studio]

I don't know if I need an "active subscription" in order to at least be able to log in and get past this message or if something else might be incorrect.

I'm new to HA and just installed HACS - excited to actually see a smart integration for my car.

I used to have the Entune App (with username and pass) then upgraded to their newer plain "Toyota" app. Then Toyota pulled a switch and bait on my 2019 Prius Prime Advanced with Connected Services. Key FOB works still for remote start, but this actually seems much handier. I realize in order for it to work that I'd probably have to pay their ransom fees. I was able to log into their App just now, albeit I don't have a subscription (yet.)

Thanks!

Edit: If it is related to not having an Active Subscription, please consider adding a notice which states "Active Subscription Required" next to the "Not Logged In" message. My initial thought (just like the app) is at the very least I might be able to get past this log in screen but unable to see data until a subscription is purchased.

_Edit #2: Might be something actually wrong on Toyota's end with Connected Services suddenly not being shown on my account. Will be on the phone with them. Used to work but apparently doesn't even show up on their end now. Was told to call Toyota's "Brand Services" at 1-800-331-4331.

Update: @t0ny-peng may have found a HA solution:
https://gist.github.com/t0ny-peng/f85b0a0dc3d46246ae17a9d7215e39da

[lunar-studio]

Update: signed up for a Safety Connect Subscription and am receiving a “not logged in” error message. Can log in with the app itself. Only trying to test this out to see if I can get voice integration working.

[lunar-studio]

Managed to finally get past the username and password entry but now I’m receiving the same error as others regarding the server error 500 retrying message.

[gmsantosti]

I´m getting the same error "Not logged in" and then I receive an email from toyota with a 6 digit code to validate my login.

Email from toyota:
Your Toyota app account sign up is almost complete, but you need to verify your email address. Please enter the verification code in the Toyota app or provide it to the agent when prompted. This code will be valid for five minutes.

Ideas?

[barnett]

Any tips here? Have an active account (with an email address) for the Toyota iOS app and can login with their website fine but keep getting this error message.

[antasp3136]

I am also having issues signing into the integration with my account. I have a active subscription as well.

[potts-mike]

Having the same issue here. Worked with the temporary VIN while the vehicle was built but not now with the actual VIN.

[fzambroni]

I have the same problem here. 2022 RAV4

[brylee123]

I am also having this problem too. My subscription ends on Aug 2023. I have uninstalled and reinstalled the integration. Still no luck. I believe it might be a change in the Toyota API.

---

Home Assistant Logs

First Error:
`Logger: custom_components.toyota_na
Source: custom_components/toyota_na/init.py:39
Integration: Toyota (North America) (documentation, issues)
First occurred: 8:23:55 PM (2 occurrences)
Last logged: 8:30:50 PM

Traceback (most recent call last):
File "/usr/local/lib/python3.10/site-packages/toyota_na/auth.py", line 116, in check_tokens
await self.refresh_tokens()
File "/usr/local/lib/python3.10/site-packages/toyota_na/auth.py", line 94, in refresh_tokens
raise LoginError()
toyota_na.exceptions.LoginError

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
File "/config/custom_components/toyota_na/init.py", line 39, in async_setup_entry
await client.auth.check_tokens()
File "/usr/local/lib/python3.10/site-packages/toyota_na/auth.py", line 118, in check_tokens
raise TokenExpired()
toyota_na.exceptions.TokenExpired`

Second Error:
`Logger: homeassistant.config_entries
Source: config_entries.py:1242
First occurred: 8:30:50 PM (1 occurrences)
Last logged: 8:30:50 PM

Config entry 'Prius Prime LE' for toyota_na integration could not authenticate`

Third Error:
`Logger: root
Source: custom_components/toyota_na/config_flow.py:34
Integration: Toyota (North America) (documentation, issues)
First occurred: 8:24:46 PM (3 occurrences)
Last logged: 9:01:41 PM

{"authId": "xxxxxxxxx", "callbacks": [{"type": "TextOutputCallback", "output": [{"name": "message", "value": "Invalid UI Locale provided"}, {"name": "messageType", "value": "2"}]}]}
{"authId": "yyyyyyyyy", "callbacks": [{"type": "TextOutputCallback", "output": [{"name": "message", "value": "Invalid UI Locale provided"}, {"name": "messageType", "value": "2"}]}]}
{"authId": "zzzzzzzzz", "callbacks": [{"type": "TextOutputCallback", "output": [{"name": "message", "value": "Invalid UI Locale provided"}, {"name": "messageType", "value": "2"}]}]}`

---

I tried logging using toyota-na 2.1.1 and also had an error.
ERROR 2023-04-05 21:00:20,998 - {"authId": "xxxxxxxxxxxxxxxxxxxxxxxxxxxx", "callbacks": [{"type": "TextOutputCallback", "output": [{"name": "message", "value": "Invalid UI Locale provided"}, {"name": "messageType", "value": "2"}]}]} Traceback (most recent call last): File "/usr/lib/python3.8/runpy.py", line 194, in _run_module_as_main return _run_code(code, main_globals, None, File "/usr/lib/python3.8/runpy.py", line 87, in _run_code exec(code, run_globals) File "/home/bryle/.local/lib/python3.8/site-packages/toyota_na/app.py", line 93, in <module> main() File "/home/bryle/.local/lib/python3.8/site-packages/toyota_na/app.py", line 51, in main run_async(cli.auth.login(args.username, args.password)) File "/home/bryle/.local/lib/python3.8/site-packages/toyota_na/app.py", line 89, in run_async return loop.run_until_complete(future) File "/usr/lib/python3.8/asyncio/base_events.py", line 616, in run_until_complete return future.result() File "/home/bryle/.local/lib/python3.8/site-packages/toyota_na/auth.py", line 116, in login authorization_code = await self.authorize(username, password) File "/home/bryle/.local/lib/python3.8/site-packages/toyota_na/auth.py", line 53, in authorize raise LoginError() toyota_na.exceptions.LoginError

[SeanPM5]

Same issue here with a 2020 RAV4 XLE Premium and Connected Services subscription that is good through Jan 2024.

Integration was working flawlessly without issues for over a year until it randomly logged me out a couple days ago after restarting HA. I attempted to log back in without success, and get the following errors in logs:

This error originated from a custom integration.

Logger: custom_components.toyota_na.config_flow
Source: custom_components/toyota_na/config_flow.py:20
Integration: Toyota (North America) (documentation, issues)
First occurred: 11:15:54 PM (1 occurrences)
Last logged: 11:15:54 PM

Not logged in

This error originated from a custom integration.

Logger: root
Source: custom_components/toyota_na/config_flow.py:34
Integration: Toyota (North America) (documentation, issues)
First occurred: 11:15:54 PM (1 occurrences)
Last logged: 11:15:54 PM

{"authId": "censored", "callbacks": [{"type": "TextOutputCallback", "output": [{"name": "message", "value": "Invalid UI Locale provided"}, {"name": "messageType", "value": "2"}]}]}

I didn't make any password/account changes on the Toyota side of things and still remained logged into the Toyota iOS app the whole time. I was able to log out and back into the Toyota iOS app without any issue, it's only the Home Assistant integration that is failing to connect.

[JiDoan]

It looks like there is a a new requirement in the login flow that requires that the user's locale is passed in along with the requirement of an one time passcode. I managed to get it to work locally but it requires making changes in the toyota-na repo that was taken down, so not sure how we can make the fix work for everyone...

[woejillis]

I'd love to get this working for my newly purchased Toyota Prius Prime. Any direction would be appreciated.

[ACiDGRiM]

It looks like there is a a new requirement in the login flow that requires that the user's locale is passed in along with the requirement of an one time passcode. I managed to get it to work locally but it requires making changes in the toyota-na repo that was taken down, so not sure how we can make the fix work for everyone...

Can you please share the local changes? I assume I can just update the files locally in homeassistant. I really need this to work because I rely on it to make sure my car is locked in a high crime area.

[JiDoan]

It looks like there is a a new requirement in the login flow that requires that the user's locale is passed in along with the requirement of an one time passcode. I managed to get it to work locally but it requires making changes in the toyota-na repo that was taken down, so not sure how we can make the fix work for everyone...

Can you please share the local changes? I assume I can just update the files locally in homeassistant. I really need this to work because I rely on it to make sure my car is locked in a high crime area.

I can give you the steps that I took but it is not production ready since I didn't have time to figure out how to hook it into Home Assistant UI asynchronously when the OTP prompt comes up.

---

In auth.py of the library, replace the callbacks to the authorize() function with these:

if (
    cb["type"] == "NameCallback"
    and cb["output"][0]["value"] == "User Name"
):
    cb["input"][0]["value"] = username
elif (
    cb["type"] == "NameCallback"
    and cb["output"][0]["value"] == "ui_locales"
):
    cb["input"][0]["value"] = "en-US"
elif (
    cb["type"] == "PasswordCallback"
    and cb["output"][0]["value"] == "One Time Password"
):
    otp = input('Please enter your app verification code: ')
    cb["input"][0]["value"] = otp
elif (
    cb["type"] == "PasswordCallback"
    and cb["output"][0]["value"] == "Password"
):
    cb["input"][0]["value"] = password

Then, login with the command line interface using python app.py authorize <email> <password>.

Once you log in, use the tokens saved in .toyota_na_tokens.json to replace the call to login() with client.auth.set_tokens in async_get_entry_data(). For safe measure, also call set_device_id() with the ID in .toyota_na_device_id.

[ACiDGRiM]

It looks like there is a a new requirement in the login flow that requires that the user's locale is passed in along with the requirement of an one time passcode. I managed to get it to work locally but it requires making changes in the toyota-na repo that was taken down, so not sure how we can make the fix work for everyone...

Can you please share the local changes? I assume I can just update the files locally in homeassistant. I really need this to work because I rely on it to make sure my car is locked in a high crime area.

I can give you the steps that I took but it is not production ready since I didn't have time to figure out how to hook it into Home Assistant UI asynchronously when the OTP prompt comes up.

In auth.py of the library, replace the callbacks to the authorize() function with these:

if (
    cb["type"] == "NameCallback"
    and cb["output"][0]["value"] == "User Name"
):
    cb["input"][0]["value"] = username
elif (
    cb["type"] == "NameCallback"
    and cb["output"][0]["value"] == "ui_locales"
):
    cb["input"][0]["value"] = "en-US"
elif (
    cb["type"] == "PasswordCallback"
    and cb["output"][0]["value"] == "One Time Password"
):
    otp = input('Please enter your app verification code: ')
    cb["input"][0]["value"] = otp
elif (
    cb["type"] == "PasswordCallback"
    and cb["output"][0]["value"] == "Password"
):
    cb["input"][0]["value"] = password

Then, login with the command line interface using python app.py authorize <email> <password>.

Once you log in, use the tokens saved in .toyota_na_tokens.json to replace the call to login() with client.auth.set_tokens in async_get_entry_data(). For safe measure, also call set_device_id() with the ID in .toyota_na_device_id.

Thanks, now I just have to figureout where the pip libraries are accessed from hassio

[JiDoan]

It looks like there is a a new requirement in the login flow that requires that the user's locale is passed in along with the requirement of an one time passcode. I managed to get it to work locally but it requires making changes in the toyota-na repo that was taken down, so not sure how we can make the fix work for everyone...

Can you please share the local changes? I assume I can just update the files locally in homeassistant. I really need this to work because I rely on it to make sure my car is locked in a high crime area.

I can give you the steps that I took but it is not production ready since I didn't have time to figure out how to hook it into Home Assistant UI asynchronously when the OTP prompt comes up.
In auth.py of the library, replace the callbacks to the authorize() function with these:

if (
    cb["type"] == "NameCallback"
    and cb["output"][0]["value"] == "User Name"
):
    cb["input"][0]["value"] = username
elif (
    cb["type"] == "NameCallback"
    and cb["output"][0]["value"] == "ui_locales"
):
    cb["input"][0]["value"] = "en-US"
elif (
    cb["type"] == "PasswordCallback"
    and cb["output"][0]["value"] == "One Time Password"
):
    otp = input('Please enter your app verification code: ')
    cb["input"][0]["value"] = otp
elif (
    cb["type"] == "PasswordCallback"
    and cb["output"][0]["value"] == "Password"
):
    cb["input"][0]["value"] = password

Then, login with the command line interface using python app.py authorize <email> <password>.
Once you log in, use the tokens saved in .toyota_na_tokens.json to replace the call to login() with client.auth.set_tokens in async_get_entry_data(). For safe measure, also call set_device_id() with the ID in .toyota_na_device_id.

Thanks, now I just have to figureout where the pip libraries are accessed from hassio

This helped me get what I needed before.