Ziggurat running on a Raspberry Pi B+

[bitcoin1192]

Cross compiled on fedora 44 with ziggurat commit 4e9f9e2. Adjust cargo toml to exclude esp related crates and build with specified target in .cargo/config.toml (linker: arm-linux-gnueabihf-gcc).

root@raspberrypi:/home/lumin0x1# uname -a
Linux raspberrypi 6.18.34+rpt-rpi-v6 #1 Raspbian 1:6.18.34-1+rpt1 (2026-06-09) armv6l GNU/Linux
root@raspberrypi:/home/lumin0x1# ./ziggurat --device /dev/ttyACM0 --baudrate 921600 --listen [::]:9999 --flow-control none
2026-07-05T06:52:10.471977Z INFO ziggurat: Listening for WebSocket clients on [::]:9999

[puddly]

Nice! How is the CPU and memory usage?

[bitcoin1192]

ziggurat currently use 1.7% cpu and 2.1% mem of system memory according to top. 11 zigbee device connected to ha via ziggurat.

lumin0x1@raspberrypi:~ $ free -m
total used free shared buff/cache available
Mem: 474 100 305 2 118 374
Swap: 473 0 473

[puddly]

Also, what OpenThread RCP chip are you using? Any issues?

[bitcoin1192]

I use promicro nrf52 board as rcp. Using included ceramic antenna. Currently no issue.
I have esp32 c6 that i want to try later. Only pcb antenna tho, and run a bit warm without cooling