-
This application is android port to desktop applicaton Scrcpy.
-
This application mirrors display and touch controls from a remote android device to android device.
-
Scrcpy for Android uses the ADB interface to connect to the android device to be mirrored, either over the network (WiFi) or over a USB cable.
- Make sure both devices are on same local network.
- Enable ADB-connect/ADB-wireless/ADB over network on the device to be mirrored.
- Open scrcpy-android app and enter ip address of device to be mirrored.
- Select display parameters and bitrate from drop-down menu(1280x720 and 2Mbps works best).
- Set Navbar switch if the device to be mirrored has only hardware navigation buttons.
- Hit start button.
- Accept and trust(check always allow from this computer) the ADB connection prompt on target device(Some custom roms don't have this prompt).
- Thats all! You should be seeing the screen of remote android device.
- To wake up the remote device, double tap anywhere on screen.
- To put the remote device to sleep, close proxmity sensor and double tap anywhere on the screen.
- To bring back the local android system navbar while mirroring the remote device, swipe up from the bottom edge of screen.
- Connect the target device to this phone with a USB cable (USB-C to USB-C, or an OTG adapter).
- Enable USB debugging in Developer options on the target device.
- Open the app. When an ADB-capable USB device is detected, the address field is automatically pre-selected to
USB: <device>.- You can also tap the address drop-down and choose the
USB:entry manually.
- You can also tap the address drop-down and choose the
- Select display parameters and bitrate from the drop-down menus, same as the WiFi flow.
- Hit start.
- Grant the USB permission prompt on this phone, then accept the Allow USB debugging? prompt on the target device (check Always allow from this computer to skip it next time).
The public network port of the device needs to be open for access
-
192.168.1.222
-
host.example.com:5555